Microgrid (MG) technologies offer users attractive characteristics such as enhanced power quality, stability, sustainability, and environmentally friendly energy through a control and Energy Management System (EMS). Microgrids are enabled by integrating such distributed energy sources into the utility grid. The microgrid concept is proposed to create a self-contained system composed of distributed energy resources capable of operating in an isolated mode during grid disruptions. With the Internet of Things (IoT) daily technological advancements and updates, intelligent microgrids, the critical components of the future smart grid, are integrating an increasing number of IoT architectures and technologies for applications aimed at developing, controlling, monitoring, and protecting microgrids. Microgrids are composed of various distributed generators (DG), which may include renewable and non-renewable energy sources. As a result, a proper control strategy and monitoring system must guarantee that MG power is transferred efficiently to sensitive loads and the primary grid. This paper evaluates MG control strategies in detail and classifies them according to their level of protection, energy conversion, integration, benefits, and drawbacks. This paper also shows the role of the IoT and monitoring systems for energy management and data analysis in the microgrid. Additionally, this analysis highlights numerous elements, obstacles, and issues regarding the long-term development of MG control technologies in next-generation intelligent grid applications. This paper can be used as a reference for all new microgrid energy management and monitoring research.

Microgrids are defined as an interconnection of several renewable energy sources in order to provide the load power demand at any time. Due to the intermittence of renewable energy sources, storage systems are necessary, and they are generally used as a backup system. Indeed, to manage the power flows along the entire microgrid, an energy management strategy (EMS) is necessary. This paper describes a microgrid energy management system, which is composed of solar panels and wind turbines as renewable sources, Li-ion batteries, electrical grids as backup sources, and AC/DC loads. The proposed EMS is based on the maximum extraction of energy from the renewable sources, by making them operate under Maximum Power Point Tracking (MPPT) mode; both of those MPPT algorithms are implemented with a multi-agent system (MAS). In addition, management of the stored energy is performed through the optimal control of battery charging and discharging using artificial neural network controllers (ANNCs). The main objective of this system is to maintain the power balance in the microgrid and to provide a configurable and a flexible control for the different scenarios of all kinds of variations. All the system’s components were modeled in MATLAB/Simulink, the MAS system was developed using Java Agent Development Framework (JADE), and Multi-Agent Control using Simulink with Jade extension (MACSIMJX) was used to insure the communication between Simulink and JADE.

Energy generation is currently evolving into a smart distribution system that incorporates several green energy resources at a distributed level, ensuring that clean energy is generated without releasing harmful gases, that operational procedures are consistent, and that energy management and supervision arrangements are improved. This paper proposes a multi-agent system-based microgrid energy management and proper control in distributed systems. For the complexity of energy management in distributed systems, a multi-agent system-based decentralized control architecture was developed. The proposed technique is based on several smart agents, each agent is based on the microgrid data for energy management and frequency control. The proposed energy management system based on the multi-agent system was tested by simulation under renewable resource fluctuations and seasonal load demand. The simulation results show that the proposed energy management system proved to be more resilient and high-performance controls than conventional centralized energy control systems.

Introduction: The utilization of solar energy in large-scale photovoltaic arrays has gained immense popularity on a global scale. However, shadows in the array lead to significant reductions in power output and create multiple power peaks in the P-V characteristics. To address this issue, the Total Cross Tie (TCT) interconnection pattern is commonly employed to minimize mismatch loss. Additionally, physical relocation methods have proven effective in dispersing shadows.Method: In this context, the Magic Square View (MSV) offers a physical rearrangement of PV modules within a TCT scheme, effectively scattering shadows across the entire photovoltaic array.Results: Simulation results confirm the MSV efficacy in enhancing the PV array’s output power under various Partial Shading Conditions (PSCs) patterns. Four PSCs patterns (Short and Wide, Long and Wide, Long and Narrow, and Short and Narrow) are considered and compared to the TCT and the recently validated Competence Square (CS) techniques. The MSV method is vital in improving the PV array’s power output, especially when confronted with Long and Wide shading patterns. The outcomes demonstrate that adopting the MSV configuration leads to a substantial increase of 33.78% and 29.83% in power output for LW and SW shading patterns, respectively, compared to the TCT setup. Even under LN and SN shading patterns, there is a notable power enhancement, achieving a remarkable 25.15% increase for the LW shading pattern compared to the TCT, surpassing enhancements achieved by SuDoKu, DS, and CS methods, which improved by 20.5%, 18.2%, and 21.6%, respectively. Overall, the MSV configuration presents a promising solution for enhancing the performance of photovoltaic arrays under shading conditions.

Accurate fault location is challenging due to the distribution network’s various branches, complicated topology, and the increasing penetration of distributed energy resources (DERs). The diagnostics for power system faults are based on fault localization, isolation, and smart power restoration. Adaptive multi-agent systems (MAS) can improve the reliability, speed, selectivity, and robustness of power system protection. This paper proposes a MAS-based adaptive protection mechanism for fault location in smart grid applications. This study developed a novel distributed intelligent-based multi-agent prevention and mitigation technique for power systems against electrical faults and cyber-attacks. Simulation studies are performed on a platform constructed by interconnecting the power distribution system of Kenitra city developed in MATLAB/SIMULINK and the multi-agent system implemented in the JADE platform. The simulation results demonstrate the effectiveness of the proposed technique.