Jaehyuk Lim

Mr. Jaehyuk Lim

Sungkyunkwan University (SKKU)
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 August 2020 in IEEE Access
Verified
Journal Article
Open access
JLJaehyuk Lim
Jaehyuk Lim
Changhwan ShinChanghwan Shin
Changhwan Shin
ML (Machine Learning)-based artificial neural network (ANN) model is proposed to estimate the LER (line edge roughness)-induced performance variation in Fin-shaped Field Effect Transistor (FinFET). For a given LER features such as rms amplitude(Δ), correlation length along x-axis (ΛX), and correlation length along y-axis (ΛY), the metrics for device performance such as on-state drive current, off-state leakage current, threshold voltage, and subthreshold swing can be computing-efficiently estimated with the ANN model.

11 June 2021 in IEEE Access
Verified
Journal Article
Open access
JLJaehyuk Lim
Jaehyuk Lim
JLJinwoong Lee
Jinwoong Lee
Changhwan ShinChanghwan Shin
Changhwan Shin
Line-edge-roughness (LER) is one of undesirable process-induced random variation sources. LER is mostly occurred in the process of photo-lithography and etching, and it provokes random variation in performance of transistors such as metal oxide semiconductor field effect transistor (MOSFET), fin-shaped field effect transistor (FinFET), and gate-all-around field effect transistor (GAAFET). LER was analyzed/characterized with technology computer-aided design (TCAD), but it is fundamentally very time consuming. To tackle this issue, machine learning (ML)-based method is proposed in this work. LER parameters (i.e., amplitude, and correlation length X, Y) are provided as inputs. Then, artificial neural network (ANN) predicts 7-parameters [i.e., off-state leakage current (I off ), saturation drain current (I dsat ), linear drain current (I dlin ), low drain current (I dlo ), high drain current (I dhi ), saturation threshold voltage (V tsat ), and linear threshold voltage (V tlin )] which are usually used to evaluate the performance of FinFET. First, how datasets for training process of ANN were generated is explained. Next, the evaluation method for probabilistic problem is introduced. Finally, the architecture of ANN, training process and our new proposition is presented. It turned out that the prediction results (i.e., non-Gaussian distribution of device performance metrics) obtained from the ANN were very similar to that from TCAD in the respect of both qualitative and quantitative comparison.

21 November 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
JLJaehyuk Lim
Jaehyuk Lim
DHDonghwan Han
Donghwan Han
SSSangwoo Seon
Sangwoo Seon
HBHyoung Won Baac
Hyoung Won Baac
Changhwan ShinChanghwan Shin
Changhwan Shin
One of the obstacles in the evolution from the fin-shaped field-effect transistor (FinFET) to the gate-all-around field-effect transistor (GAAFET) is the etching-depth variation. In the process step for etching the source/drain (S/D) regions, the variation makes the over-etching inevitable to avoid the fatal issue that under-etched region may induces (e.g., two adjacent gates can be connected in the following processes). However, the over-etching goes with the degradation of device performance, especially OFF-state performance. To ease the degradation, a counter-doped pocket was suggested in this work. The process parameters for the pocket such as the over-etching depth ( $\textit{T}_{\text{ov}}$ ), the pocket epitaxy thickness ( $\textit{T}_{\text{EPI}}$ ), and the pocket doping concentration ( $\textit{N}_{\text{pocket}}$ ) were explored. Subsequently, the device performance was evaluated with respect to OFF-state leakage current ( $\textit{I}_{\biosc{off}}$ ) and threshold voltage ( $\textit{V}_{\text{th}}$ ) variation. It was confirmed that the $\textit{I}_{\biosc{off}}$ decreased, and the $\textit{V}_{\text{th}}$ variation was suppressed with optimized process parameters. By analyzing the total doping concentration at substrate, it also turned out that the GAAFET with the pocket can give advantageous impact on the feasibility.

12 December 2022 in IEEE Access
Verified
Journal Article
Open access
TPTaeeon Park
Taeeon Park
JKJihwan Kwak
Jihwan Kwak
HAHongjoon Ahn
Hongjoon Ahn
JLJinwoong Lee
Jinwoong Lee
JLJaehyuk Lim
Jaehyuk Lim
TMTaesup Moon
Taesup Moon
For higher density of transistors in Integrated Circuit (IC), various scaling technologies have been introduced. In the light of the physical limit in advancing single-gate transistor architecture, the structural transition from planar device architecture toward 3D device architecture (of which the representative one is Fin-shaped Field-Effect Transistor, or FinFET) manifests itself. However, during fabrication, the unexpected process-induced random variations of the transistor’s electrical characteristics have become more extreme with aggressively scaling down the physical dimension of transistor as well as with evolving from 2D to 3D device structure. Consequently, accurate and rapid estimation of the random variations conditioned on the variation sources ( e.g ., LER, RDF, and WFV) is required. Recently, machine learning-based approaches were utilized to estimate the LER-induced variations, but they were highly dependent on modeling and evaluation assumptions ( e.g ., Gaussian or independence). To that end, firstly, we introduce GAN-based framework for the estimation of process-induced random variations. Since GAN is free from distributional assumptions, this enables precise prediction and, more importantly, enables unified estimation, i.e ., adaptable to various variation source. Secondly, to achieve better generalization on unseen conditions, we additionally suggest a two-step learning strategy utilizing the latest Conditional GAN models. Thirdly, we introduce sample-based evaluation procedure which measures the difference of two sample sets in probabilistic perspective. Finally, the evaluation results on LER and RDF/WFV datasets show that our GAN-based framework is computationally efficient and is able to generate synthetic samples similar to the TCAD simulated samples that contain the random variations, both qualitatively and quantitatively. From such results, our GAN-based framework is expected to be successfully applied to real data, and consequently be able to reliably estimate the random variations of fabricated transistors with multiple orders of magnitude speed-up compared to the conventional TCAD simulation-based estimation.

7 August 2021 in Electronics
Verified
Journal Article
Open access
PDF file
YCYejoo Choi
Yejoo Choi
JLJinwoong Lee
Jinwoong Lee
JLJaehyuk Lim
Jaehyuk Lim
SMSeungjun Moon
Seungjun Moon
Changhwan ShinChanghwan Shin
Changhwan Shin
In this study, the impact of the negative capacitance (NC) effect on process-induced variations, such as work function variation (WFV), random dopant fluctuation (RDF), and line edge roughness (LER), was investigated and compared to those of the baseline junctionless nanowire FET (JL-NWFET) in both linear (Vds = 0.05 V) and saturation (Vds = 0.5 V) modes. Sentaurus TCAD and MATLAB were used for the simulation of the baseline JL-NWFET and negative capacitance JL-NWFET (NC-JL-NWFET). Owing to the NC effect, the NC-JL-NWFET showed less variation in terms of device performance, such as σ[Vt], σ[SS], σ[Ion/Ioff], σ[Vt]/µ[Vt], σ[SS]/µ[SS], and σ[Ion/Ioff]/µ[Ion/Ioff], and enhanced device performance, which implies that the NC effect can successfully control the variation-induced degradation.

16 September 2024 in ACS Nano
Verified
Journal Article
Closed access
JSJuho Sung
Juho Sung
SKSanghyun Kang
Sanghyun Kang
DHDonghwan Han
Donghwan Han
GKGwon Kim
Gwon Kim
JLJaehyuk Lim
Jaehyuk Lim
Changhwan ShinChanghwan Shin
Changhwan Shin