Today, the application of nanoparticles with controlled morphologies in solar energy conversion and storage systems is highlighted. This study focused on the assessment of Fe2O3 water-based nanofluids in volumetric solar absorbers and compared the performance of three shapes (blade, spherical, and octahedral), and three concentrations of nanoparticles (0.005, 0.01, and 0.02 vol%). First, a set of homogeneous nanofluids were prepared using a probe ultrasonic apparatus and by adding an anionic surfactant. In addition to long-time stability and narrow particles size distribution, obtained nanofluids presented a considerable light absorption capability in the visible region. It was seen that the light absorption spectrum was broadened with increasing the nanofluid concentration. Moreover, for each concentration, the blade nanoparticles improved the extinction coefficient and the solar-weighted absorption fraction relatively higher than the other shapes. For example, at a concentration of 0.02 vol% and penetration distance of 1 cm, the blade-nanofluid absorbed 96.2% of incident solar energy, which was higher than the spherical nanofluid with 93.5% and octahedral nanofluid with 87.2%. The results of thermal tests conducted in a set of bath direct solar collectors showed that the highest solar–thermal conversion efficiency after 1 hour of light exposure was related to 0.02% blade-nanofluid (82%). In these conditions, the growth of bulk temperature was observed 2.31 times higher than pure water.
Textile dyes such as Reactive Blue 21 and Reactive Red 195 are complex organic compounds widely used in the fabric industry, which often cause significant environmental pollution due to their resistance to conventional wastewater treatment methods. The aim of this study is photo-degradation of these organic dyes by copper (II) oxide nanoparticles (CuO-NPs) that biosynthesized via a method based on pistachio hulls extract. The synthesized nanoparticles were characterized by various techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), dynamic light scattering (DLS), and ultraviolet-visible (UV-Vis) spectroscopy. The characterization results confirm the formation of homogeneous, spherical, crystalline CuO-NPs with an average size of approximately 90 nm. The high quality of CuO-NPs synthesized using pistachio hull extract is attributed to the presence of natural reducing and capping agents in the extract. These agents play a dual role: they reduce the copper precursor to CuO-NPs and simultaneously stabilize the nanoparticles by preventing agglomeration. The biosynthesized CuO-NPs showed high photocatalytic activity in degrading organic dyes under UV light irradiation. Specifically, the degradation efficiencies reached about 83% for Reactive Blue 21 and 75% for Reactive Red 195 after 180 min of irradiation.