This letter explores the feasibility of incorporating a negative feedback structure into ultrawideband power amplifiers (UWB PAs) to enhance both gain and efficiency flatness. A design methodology for UWB PAs is provided, considering the influence of a negative feedback structure on power amplifier (PA) design. The desired load impedance space is determined using power and efficiency contours. The multisection Chebyshev impedance transformation serves as the output matching technique in designing the UWB PA. The measured results indicate that the PA delivers an output power between 42 and 44.8 dBm and a drain efficiency (DE) ranging from 57.6% to 71.3%, with a bandwidth of 0.33–3.7 GHz.
A Class-F mode-based power amplifier (PA) with optimized efficiency in triple-band was designed using a simple and systematic approach. By considering the second and third harmonic terminations of the PA, the relationship between the output impedance design space and the drain efficiency (DE) is extracted by large-signal model simulation. Then, a low-pass matching topology is utilized for the triple-band efficiency optimization. The method is justified by both simulation and measurement of a triple-band PA to integrate three functions into one hardware, i.e., 1518–1525 MHz for mobile communication, 2.1 GHz for telemetry and control, and 2.492 GHz for navigation signal transport. The proposed PA achieves a measured result of high DE (63% at 1.52 GHz, 71% at 2.1 GHz, 59% at 2.492 GHz) in the three bands with an output power of at least 40 dBm.
This work outlines the design, implementation, and experimental results of a Class‐F power amplifier (PA) with a novel output matching topology by utilizing substrate integrated waveguide (SIW). The design methodology is first proposed with one highly integrated SIW matching structure. The impedances at fundamental, second harmonic and third harmonic frequencies are analysed to explain good impedance matching for the PA as well as the isolation mechanism of the direct current (DC) and radio frequency (RF). For demonstration, an S‐band 10‐W Class‐F PA is fabricated and tested. The simulation and measurement results agree very well with each other, which verifies the proposed technology of SIW output matching. To the authors’ knowledge, this is the first time to use a highly integrated SIW matching in Class‐F PA, which simplifies the output matching for third‐order harmonics and DC/RF isolation structures.
14 November 2025 in IEEE Transactions on Antennas and Propagation
We propose a wideband self-multipath decoupled interconnected slotted-patch antenna system that is capable of generating multiple decoupling nulls for the application of multiple-input multiple-output (MIMO) systems. By designing dual-port interconnected slotted-patch cavities, a total of four pairs of different self-decoupling paths are constructed by utilizing the common mode and differential mode of each cavity, which can produce counteraction effects at four different frequencies. The simulation results show that such dual-port interconnected slotted-patch antennas can achieve the isolation from 8 dB to over 20 dB within the 5 GHz to 6 GHz wideband range when these two antennas operate in the same mode. Furthermore, this design can also be extended to the three-port or four-port interconnected slotted-patch antennas with different rotation angles, realizing wideband decoupling performance between any arbitrary two ports. The proposed design possesses the advantages of wideband decoupling, miniaturization, and applicability to multiple antennas, presenting promising potential application value for high-integration wideband MIMO antenna systems.
In this paper, the design and implementation of a Doherty power amplifier (DPA) are proposed using gallium nitride high electron mobility transistors (GaN HEMTs). Class-F and Class-C modes are combined to obtain an asymmetric DPA. The precise active load-pull controlling of fundamental and harmonic terminations of the DPA is simulated and analyzed, including the parasitics of the transistors. The measurements of the DPA with the phase difference, input power ratio adjustment, and envelope tracking of the auxiliary PA are discussed in detail in order to achieve a competitive performance. A greater than 63% drain efficiency is obtained within the 10-dB input power dynamic range at 2.1 GHz. The peak of the drain efficiency reaches 73%, with a corresponding output power of 46 dBm.