This paper investigates the ventilation performance of a stack system built with a bulbous façade glazed curtain and an open atrium in a six-storey office building, in DongGuan eco-park in southern China. Sustainable development, energy efficiency, indoor environmental quality and thermal comfort are the key criteria for the design; incorporating LingNan architectural cultural elements, with large open atrium for natural ventilation and openable windows to allow air movement throughout the building. The high energy load accentuated by the glazing would be offset by stack ventilation, to provide indoor circulation of air to maintain a satisfactory level of thermal comfort in spring/autumn, without relying on air conditioning, thus saving energy consumption (about 60%). Computational Fluid Dynamics (CFD) simulations were conducted to determine the efficacy of natural ventilation to illustrate the heat storage, dissipation and transfer within the building. The ventilation and heat dissipation performance of the stack system in the bulbous atrium in different seasons are illustrated with four different percentage of inlet and outlet openings. In summer and autumn/spring, good natural ventilation performance in the building can be achieved by the bulbous façade layer caused by buoyancy force and wind pressure and in the atrium courtyard. Sound ventilation performance can be achieved in rooms on most floors, while worst ventilation performance is expected in the top floor. The design of the bulbous façade with a large open atrium can provide effective ventilation efficiency for a better indoor thermal environment by strategic use of building self-shading and natural ventilation.
This paper presents an evaluation of a series of novel wood fibre, sepiolite and expanded perlite (WSE)-based mortars that have been developed by Hunan University. The evaluation investigated the influence of morphology structure and the effect of different hot-humid environments on hygroscopic properties of WSE-based mortar to form breathable wall which can provide a moderation of moisture, indoor air quality and thermal insulation of building. The microstructure, thermal conductivity, mechanical properties and hygroscopic properties of WSE-based mortar specimens were assessed to characterize the relationship between performances of the material. WSE is an inorganic porous fibre-aggregate mixture. The hygroscopic properties of the mortars can be greatly improved by adding the WSE fibres-aggregates, especially under high temperature (40℃) and high relative humidity (98%) during summer. The addition of admixture can improve the properties of WSE-based mortar to meet requirements of special performances (such as compressive strength) without affecting the hygroscopic properties. The WSE-based breathable wall is a good moisture buffering controller that could improve indoor air quality. The evaluation presented in this paper should provide the design fundamental for development of breathable wall for future built environment, to allow optimizing the boundary conditions for energy saving and control of indoor humidity environment by incorporating the mortars as finishing materials.