Given the complex separation mechanisms of the particulate mixture in a hydrocyclone and the uncertain effects of particle size and shape on separation, this study explored the influence of the maximum projected area of particles on the separation effect as well as single and mixed separations based on CFD–DEM (Computational Fluid Dynamics and Discrete Element Method) coupling and experimental test methods. The results showed that spherical particles flowed out more easily from the downstream as their sizes increased. Furthermore, with the enlargement of maximum projected area, the running space of the particles with the same volume got closer to the upward flow and particles tended to be separated from the upstream. The axial velocity of the combined separation of 60 µm particles and 120 µm particles increased by 25.74% compared with that of single separation of 60 µm particles near the transition section from a cylinder to a cone. The concentration of 60 µm particles near the running space of 120 µm particles increased by 20.73% and those separated from the downstream increased by 4.1%. This study showed the influence of particle size and maximum projected area on the separation effect and the separation mechanism of mixed sand particles in a hydrocyclone, thereby providing a theoretical basis for later studies on the effect of particle size and shape on sedimentation under the cyclone action in a hydrocyclone.

Dripline flushing is an effective way to relieve emitter clogging and extend the longevity of drip irrigation systems. This laboratory study was conducted at Kunming University of Science and Technology to evaluate the effect of three targeted flushing velocities (0.3, 0.6, and 0.9 m/s) and four flushing frequencies (no flushing, flushing daily, and flushing every three or five days) on the emitter’s service life and the particle size distribution of the sediment discharged from emitters and trapped in an emitter channel. The gradation of particle size was analyzed by a laser particle size analyzer. The experiment results suggested that flushing velocity and flushing frequency had a significant effect on the service life of emitters, and the emitter’s service life was extended by 30.40% on average under nine different flushing treatments. Flushing can effectively reduce the accumulation of sediments in the dripline and decrease the probability of coarse particles flowing into emitters and fine particles aggregating and cementing in the labyrinth channel, thus relieving the emitter clogging. Therefore, dripline flushing can effectively slow down clogging in muddy water drip irrigation system. The recommended flushing velocity should be set at 0.6 m/s, and the flushing intervals should be shortened.