A high sensitivity optical fiber gas pressure sensor based on the enhanced Vernier effect is proposed. The sensor is composed of a fiber Fabry-Perot interferometer (FPI) and Mach-Zehnder interferometer (MZI). Since the interference fringes of FPI and MZI drift in the opposite direction with the change of gas pressure, when their free spectral ranges are similar, the enhanced Vernier effect is formed after their cascading. Compared with the traditional Vernier effect gas pressure sensor, the enhanced Vernier effect gas pressure sensor realizes much higher sensitivity gas pressure measurement without complex manufacturing process or desensitized reference interferometer. The experimental results show that the sensitivity of the enhanced Vernier effect sensor is 241.87 nm/MPa. In the two traditional Vernier effect gas pressure sensors formed by cascading FPI and MZI, the sensitivity of sensor is 63.02 nm/MPa and 171.26 nm/MPa, respectively. Compared with the two traditional Vernier effect sensors, the sensitivity of the enhanced Vernier effect sensor is increased by 3.8 times and 1.4 times, respectively. The proposed sensor also has the advantages of good repeatability and stability, fast response, low cost and easy manufacture. Our structure also provides a new design scheme for a high sensitivity optical fiber gas pressure sensor.
An ultra-sensitive sensor, based on two Fabry–Perot interferometers (FPIs), has been realized for temperature and pressure sensing. A polydimethylsiloxane (PDMS)-based FPI1 was used as a sensing cavity, and a closed capillary-based FPI2 was used as a reference cavity for its insensitivity to both temperature and pressure. The two FPIs were connected in series to obtain a cascaded FPIs sensor, showing a clear spectral envelope. The temperature and pressure sensitivities of the proposed sensor reach up to 16.51 nm/°C and 100.18 nm/MPa, which are 25.4 and 21.6 times, respectively, larger than these of the PDMS-based FPI1, showing a great Vernier effect.
13 October 2021 in Measurement Science and Technology
In this study, a highly sensitive gas pressure sensor based on two Fabry–Perot interferometers (FPIs) in parallel with the Vernier effect is designed and demonstrated. In the sensor, FPI 1 and FPI 2 were used as the detection and reference units, respectively. FPI 1 and FPI 2 have similar structures, both comprising a single-mode fiber and capillary splicing. However, the microaperture is processed on the capillary of the FPI 1 with a femtosecond laser, enabling the external gas to enter the FPI 1 cavity through the microaperture channel to realize the gas pressure measurement. The Vernier effect is achieved by superimposing the reflective spectra of FPI 1 and FPI 2 , which have a small cavity length. The gas pressure response, repeatability, and stability of the sensor structures were investigated. The sensitivity of the sensor was improved owing to the Vernier effect. Experimental results indicate that the sensor sensitivity is up to 47.76 nm MPa −1 , which is 11.9 times that of a single FPI 1 sensor without the Vernier effect. The measured temperature cross-sensitivity of the sensor is approximately 5.1 kPa/ °C. In addition, the sensor has the advantages of simple manufacturing, robust structure, and stable operation. Finally, the manufacturing method of FPI and the parallel connection mode of FPIs could also be used in other sensing fields, providing an alternative design scheme for high-sensitivity sensors.
A long period fiber grating (LPFG) was inscribed in a tapered two-mode fiber (TMF) by using CO2 laser pulse point to point direct writing technique. TMF is spliced between two segments of single mode fiber, then TMF is tapered to a waist diameter of 55 μm, and this structure cannot form a fiber optic interferometer. After writing a LPFG on a tapered TMF, many resonance dips appeared. These resonance dips are formed by the coupling between different core modes and cladding modes, therefore they have different sensitivity responses to environmental parameters. In order to further improve the sensitivity of LPFG resonance dips and the mechanical strength of LPFG, the polydimethylsiloxane (PDMS) optical material is coated on the surface of LPFG. The experiment found that two resonance dips wavelength of λ 1 and λ 1 of LPFG are very sensitive to temperature and gas pressure, and the temperature and gas pressure sensitivities of λ 1 reach -0.412 nm/°C and -12.16 nm/MPa respectively, while the temperature and gas pressure sensitivities of λ 2 reach -0.484 nm/°C and -18.26 nm/MPa respectively. Due to its simple manufacturing, low cost, and robustness, this LPFG has enormous potential in highly sensitive temperature and gas pressure measurement applications.
An ultra-sensitive fiber optic magnetic field sensor based on Fabry Perot interferometer (FPI 1 ) and magnetostrictive material Terfenol-D is proposed. A low fineness FPI 1 made by inserting a tapered two-mode fiber (TMF) into a hollow-core fiber (HCF). Due to the increased effective length of strain, FPI 1 is particularly sensitive to axial strain. Then, the magnetostrictive material Terfenol-D is bonded to FPI 1 . Due to the excellent stretching properties of Terfenol-D under the action of a magnetic field, FPI 1 adhered to Terfenol-D also has high sensitivity to the magnetic field. The experiment found that in the large magnetic field range of 9.7 - 92.4 mT, the magnetic field sensitivity of FPI 1 reached 1.67 nm/mT. In order to further improve the sensitivity of FPI 1 to magnetic fields, we connected a magnetic field insensitive air cavity FPI 2 in parallel with FPI 1 to form the Vernier effect, further amplifying the magnetic field sensitivity of FPI 1 . In the range of 13.08 - 21.93 mT, the magnetic field sensitivity was amplified to 36.43 nm/mT, which is 21.8 times the sensitivity of a single FPI 1 , which is currently the highest known magnetic field sensitivity. The sensor structure also has good repeatability and stability, and low temperature crosstalk. It is expected to become one of the best options for highly sensitive magnetic field detection.