Colorfastness to washing and crocking (color loss due to rubbing) are essential qualities for any dye/fabric combination that will be used for garments or upholstery. In this study, colorfastness to washing and crocking of fabrics dyed with wood-staining fungal pigments was compared to colorfastness of commercial dyes using an alternative mechanical testing method. Overall, wood-staining fungal pigments out performed commercial dyes for colorfastness to washing and wet and dry crocking. Xylindein was the most colorfast dye. Draconin red yielded inconsistent results, and the yellow pigment required a mordant to achieve any colorfastness. This study showed that the mechanical color reading method, along with statistical analysis, provided an objective, repeatable gauge of colorfastness, although visual inspection is also needed for practical purposes.
The extracellular colorants produced by Chlorociboria aeruginosa, Scytalidium cuboideum,and Scytalidium ganodermophthorum, three commonly utilized spalting fungi, were tested against a standard woodworker’s aniline dye to determine if the fungal colorants could be utilized in an effort to find a naturally occurring replacement for the synthetic dye. Fungal colorants were delivered in two methods within a pressure treater—the first through solubilization of extracted colorants in dichloromethane, and the second via liquid culture consisting of water, malt, and the actively growing fungus. Visual external evaluation of the wood test blocks showed complete surface coloration of all wood species with all colorants, with the exception of the green colorant (xylindein) from C. aeruginosa in liquid culture, which did not produce a visible surface color change. The highest changes in external color came from noble fir, lodgepole pine, port orford cedar and sugar maple with aniline dye, cottonwood with the yellow colorant in liquid culture, lodgepole pine with the red colorant in liquid culture, red alder and Oregon maple with the green colorant in dichloromethane, and sugar maple and port orford cedar with the yellow colorant in dichloromethane. The aniline dye was superior to the fungal colorants in terms of internal coloration, although none of the tested compounds were able to completely visually color the inside of the test blocks.
Colorfastness to light is an essential quality for textiles exposed to sunlight for a significant length of time. In this study, the colorfastness (specifically to light) of fabrics dyed with wood-staining (spalting) fungal pigments was compared to the colorfastness of commercial dyes. A short-duration immersion dying method without heat was used to minimize both water and energy usage. Both mordanted and unmordanted fabrics were tested and compared for colorfastness. Additionally, a new method of testing for colorfastness to light was developed. Results indicate that the wood-staining fungal pigments demonstrate superior colorfastness to light over commercial dyes when the employed dyeing method is used. Additionally, the colorfastness to light testing method developed using the L-2 Blue Wool Standard and QUV Accelerated Weathering Machine is a viable alternative to current standard colorfastness to light testing methods.