Pawan Kumar

Pawan Kumar


Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 May 2020 in Molecules
Verified
Journal Article
Open access
PDF file
Apurba MahapatraApurba Mahapatra
Apurba Mahapatra
NPNishi Parikh
Nishi Parikh
PKPawan Kumar
Pawan Kumar
MKManoj Kumar
Manoj Kumar
DPDaniel Prochowicz
Daniel Prochowicz
PYPankaj Yadav
Pankaj Yadav
The last decade has witnessed the impressive progress of perovskite solar cells (PSCs), with power conversion efficiency exceeding 25%. Nevertheless, the unsatisfactory device stability and current–voltage hysteresis normally observed with most PSCs under operational conditions are bottlenecks that hamper their further commercialization. Understanding the electrical characteristics of the device during the aging process is important for the design and development of effective strategies for the fabrication of stable PSCs. Herein, electrochemical impedance spectroscopical (IS) analyses are used to study the time-dependent electrical characteristics of PSC. We demonstrate that both the dark and light ideality factors are sensitive to aging time, indicating the dominant existence of trap-assisted recombination in the investigated device. By analyzing the capacitance versus frequency responses, we show that the low-frequency capacitance increases with increasing aging time due to the accumulation of charges or ions at the interfaces. These results are correlated with the observed hysteresis during the current–voltage measurement and provide an in-depth understanding of the degradation mechanism of PSCs with aging time.

20 February 2017 in Journal of Electroceramics
Verified
Journal Article
Closed access
PDF file
MCM. Chandrasekhar
M. Chandrasekhar
PKPawan Kumar
Pawan Kumar

28 August 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
SSSujata Swain
Sujata Swain
RBRakesh Bhaskar
Rakesh Bhaskar
MGMukesh Kumar Gupta
Mukesh Kumar Gupta
SSSonia Sharma
Sonia Sharma
SDSudip Dasgupta
Sudip Dasgupta
PKPawan Kumar
Pawan Kumar
The effect of the sintering temperature on densification and the resultant mechanical, electrical, and biological properties of mechanochemically processed hydroxyapatite (HAp) samples was investigated. HAp samples were sintered at 1200, 1250, and 1300 °C for 4 h, respectively. HAp samples sintered at 1250 °C showed better mechanical properties, which was attributed to their smaller grain size compared to HAp samples at higher sintering temperatures. The nearly identical value of the dielectric constant (εr) and better cell proliferation was exhibited by HAp samples sintered at 1250 and 1300 °C, respectively. At ~210 °C, in all the samples sintered at different temperatures, a dielectric anomaly was obtained, which was attributed to the phase transition temperature of the HAp system. Dielectric properties near the phase transition temperature showed a dielectric relaxation-type of behavior, which was attributed to the re-orientational motion of OH− ions in the HAp system. Higher cell proliferation and viability were exhibited by the HAp1300 samples, whereas comparatively equivalent cell growth and higher mechanical strength were observed in the HAp1250 samples.

16 February 2023 in Biomedical Materials
Verified
Journal Article
Closed access
PDF file
SSSujata Swain
Sujata Swain
RBRakesh Bhaskar
Rakesh Bhaskar
KNKannan Badri Narayanan
Kannan Badri Narayanan
MGMukesh Kumar Gupta
Mukesh Kumar Gupta
SSSonia Sharma
Sonia Sharma
PKPawan Kumar
Pawan Kumar
Bone implants fabricated using nanocomposites containing hydroxyapatite (HA) and barium titanate (BT) show osteoconductive, osteoinductive, osteointegration, and piezoelectricity properties for bone regeneration applications. In our present study, HA and BT nanopowders were synthesized using high-energy ball-milling-assisted solid-state reaction with precursors of calcium carbonate and ammonium dihydrogen phosphate, and barium carbonate and titanium oxide powder mixtures, respectively. Hexagonal HA and tetragonal BT phases were formed after calcination at 700 and 1000 °C, respectively. Subsequently, hydroxyapatite/barium titanate (HA/BT) nanocomposites with different weight percentages of HA and BT were prepared by ball-milling, then compacted and sintered at two different temperatures to endow these bioceramics with better mechanical, dielectric, and biological properties for bone regeneration. Microstructure, crystal phases, and molecular structure characterizations of these sintered HA/BT nanocomposite compacts (SHBNCs) were performed using field-emission scanning electron microscopy, x-ray diffraction, and Fourier-transform infrared spectroscopy, respectively. Bulk density was evaluated using the Archimedes method. HA/BT nanocomposites with increased BT content showed enhanced dielectric properties, and the dielectric constant (ϵr ) value for 5HA/95BT was ∼182 at 100 Hz. Mechanical properties such as Vicker’s hardness, fracture toughness, yield strength, and diametral tensile strength were also investigated. The hemolysis assay of SHBNCs exhibited hemocompatibility. The effect of these SHBNCs as implants on the in vitro cytocompatibility and cell viability of MG-63 osteoblast-like cells was assessed by MTT assay and live/dead staining, respectively. 15HA/85BT showed increased metabolic activity with a higher number of live cells than BT after the culture period. Overall, the SHBNCs can be used as orthopedic implants for bone regeneration applications.

1 January 2006 in Physica B: Condensed Matter
Verified
Journal Article
Closed access
PKPawan Kumar
Pawan Kumar
CPChandra Prakash
Chandra Prakash
OTO.P. Thakur
O.P. Thakur
RCR. Chatterjee
R. Chatterjee
TGT.C. Goel
T.C. Goel

9 March 2010 in Ceramics International
Verified
Journal Article
Closed access
PKPawan Kumar
Pawan Kumar
PPP. Palei
P. Palei