The sorption of basic dyes onto magnetic nanosorbent is commonly used as a novel material to combat powdered activated carbon, which is difficult to handle and separate during water and wastewater treatment. This adsorption method is commonly implemented in water and wastewater treatment due to its low cost and high performance. To explore the feasibility of adsorption, six different nonlinear isotherm models were applied and introduced to evaluate the performance and adsorption mechanisms via Microsoft Excel, and they were then compared to those of MATLAB and OriginPro. The Langmuir best provided the sorption of methylene blue adsorbed for a two-parameter isotherm model. The three-parameter model Toth gave a goodness of fit indicating a heterogeneous sorbent surface. Error function analysis found that the Residual Sum of Squares Error, Chi-square, Coefficient of determination, Average Relative Error, Hybrid Fractional Error Function, Marquardt’s Percent Standard Deviation and Root Mean Square Error provided the best overall results. In comparison, it could be concluded that six isotherm models showed the confidence interval that is simply the best fit at all experimental data points provided by the three software tools. All error function results indicated that the Microsoft Excel Solver function spreadsheet method satisfied all the statistic measures to predict the real variance of the probability of experimental data for all six isotherm models of adsorption of basic dye removal. One added benefit of this Microsoft Excel software tool is the built-in function associated with the desired type of application, which designates the desired type of error/statistical functions not mentioned in this research to the adsorbent materials used.

Biomass pyrolysis for oil production results in biochar byproduct, whose characteristics can be improved by the reuse of waste plastics. While the plastic recycling process leads to a large amount of plastic waste that cannot be reused, this underutilized feedstock holds the potential for coprocessing with biomass, thereby increasing the likelihood of producing valuable biochar products. This study sought to evaluate how the inclusion of plastic waste influences the pyrolysis of biomass residue. To this end, sawdust and hardwood biomass were chosen as materials to investigate how the presence of plastics might alter the properties of the resulting chars. Synergies were observed among the biomass components, particularly in samples with higher lignin content from hardwood biomass, which resulted in increased biochar yields. The results showed that a 20% blend of plastic waste with wood at 300°C produced a solid char with a yield of 40% by weight. Co‐pyrolysis of the biochar derived from blends of 20 wt. % PP with both sawdust and hardwood resulted in significant enhancement of various properties of the resulting biochar, including surface area, carbon content, hydrophobicity, and aromaticity. This enhancement had a favorable effect on the carbon content and calorific values of the biochar. These enhanced properties significantly contributed to the biochar’s capacity for sorbing substances like various heavy metals. It can be proved that this result showed the importance of the energy content of biochar and its potential use for renewable applications. The beneficial combined effect seen in the plastic blends can be credited to the interaction between the biomass and polymer components, resulting in the production of fewer volatile products at higher temperatures. It can be suggested that biochar from biowaste and plastic waste not only reduces environmental impact but also converts it into a valuable and eco‐friendly product.

Non-decomposable plastic has been replaced with polylactic acid, which is a biodegradable aliphatic polyester stationary phase, in composite films embedded with a TiO₂ photocatalyst for mitigation of indoor air pollution. PLA has superior properties relative to those of other biopolymers, such as a relatively high melting point, crystallinity, and rigidity. This study aimed to incorporate TiO₂-anatase into PLA for use as a photocatalyst using the blown film method. Photocatalytic oxidation, an advanced oxidative process, has been recognized as an economical technique providing convenience and efficiency with indoor air treatment. Therefore, the use of new environmentally friendly biodegradable polymers provides an alternative way to address the severe environmental concerns caused by non-decomposable plastics. UV–vis spectrophotometry and scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDX) were used to observe the dispersibility and mixing capacity of the TiO₂-anatase PLA matrix. TiO₂ dosages were 5, 10, and 15% (wt/wt), and they were incorporated with a twin-screw extruder. SEM–EDX images demonstrated the homogeneity of TiO₂ distribution in the PLA matrix. The energy band gaps of TiO₂ in the PLA/TiO₂-composite films were between 3.14 and 3.22 eV. The relationship between the photocatalytic oxidation rate and the TiO₂ dosage in the PLA/TiO₂-composite films was determined. A prototype reactor model is geared toward the development of air purifiers for indoor air conditioning. Rate constants for benzene degradation were obtained using first-order kinetics to find rate constants matching experimental findings. In the PLA/TiO₂-composite film, the TiO₂-anatase photocatalyst was able to degrade 5 ppm benzene. This work contributes to the use of ecoefficient photocatalytic oxidation.

Advanced technologies of electronics industries have led to environmental contamination concerns, especially waste print circuit boards containing a very high concentration of copper (II) ions, which can be discharged in wastewater containing many contaminated metals. A low pH is a necessity for treating industrial wastewater containing heavy metals to meet engineering process design. A novel polymeric bispicolamine chelating resin, Dowex-M4195, was applied as an alternative for investigating the behavior of copper (II) in acidic solution via an ion exchange method in a batch experiment system. Characterization of physical and chemical properties before and after ion exchange were also explored through BET, SEM-EDX, FTIR and XRD. Response surface methodology was also applied for optimization of copper (II) removal capacity using design of experiment for selective chelating resin at a low pH. The results indicate that H⁺ Dowex-M4195 chelating resin had a high-carbon content and specific surface area of >64% and 26.5060 m²/g, respectively. It was predominantly macropore porous in nature due to the N₂ gas adsorption isotherm and exhibited type IV with insignificant desorption hysteresis loop of H1-type. It was spherical and cylindrical. After the ion exchange process of copper (II)-loaded H⁺ Dowex-M4195, the specific surface area and total pore volume decreased by about 17.82% and 5.39%, respectively, as compared to H⁺ Dowex-M4195. Hysteresis loop, isotherm and pore size distribution were also similar. Regarding the functional group, the surface morphology and crystalline structures of H⁺ Dowex-M4195 showed copper (II) compound based on the structure of chelating resin that confirmed effective ion exchange behavior. The design of optimization indicated that copper (II) removal capacity of about 31.33 mg/g was achieved, which could be obtained at 6.96 h, pH of 2 (a desirable low pH), dose of 124.13 mg and concentration of 525.15 mg/L. The study indicated that the H⁺ Dowex-M4195 (which is commercially available on the market) can successfully be applied as an alternative precursor through the ion exchange method for further reuse and regeneration of the copper (II) in the electronic waste industries and other wastewater applications needed to respond the policy of biocircular green economy in Thailand.

Magnetic nanosorbents efficiently capture substances, particularly basic dyes, and can be easily recovered using a magnetic field in water treatment. Adsorption is a cost-effective and highly efficient method for basic dye removal. This study compared eight nonlinear kinetic adsorption models using Microsoft Excel 2023, which provided a detailed analysis and statistical results comparable to advanced programs like MATLAB and OriginPro. The Fractal Like-Pseudo First Order (FL-PFO) model showed the best fit for the kinetic adsorption model, closely predicting experimental data at 33.09 mg g⁻¹. This suggests that the diffusion rate of basic dye within the magnetic nanosorbent pores is a crucial factor. The statistical parameters confirmed the suitability of these kinetic adsorption models for describing the observed behavior. Overall, Microsoft Excel emerged as a reliable tool for predicting adsorption behavior using various kinetic models for basic dye removal, offering a wide range of functions for diverse applications, including environmental monitoring and modeling. Corrected Akaike’s information criterion was used to determine the optimal model. It found the lowest AIC_corrected value of about −3.8479 for the FL-PFO kinetic model, while the Elovich kinetic adsorption model had the highest AIC_corrected value of 29.6605. This indicates that the FL-PFO kinetic model effectively correlated the kinetic data. It can be concluded that Microsoft Excel’s accessibility, familiarity, and broad range of capabilities make it a valuable resource for many aspects of environmental engineering.