A high-birefringence and low-loss terahertz (THz) hollow-core anti-resonant fiber (THz HC-ARF) is designed and analyzed numerically by the finite element method (FEM). The THz HC-ARF is composed of an elliptical tube as the core for high birefringence guidance and a pair of symmetrical slabs arranged vertically as the cladding to attain low loss. Numerical analysis indicates that the birefringence reaches 10−2 in the transmission window between 0.21 and 0.35 THz. The highest birefringence is 4.61 × 10−2 at 0.21 THz with a loss of 0.15 cm-1. To verify the theoretical results, the THz HC-ARF is produced by three-dimensional (3D) printing, and the transmission characteristics are determined by THz time-domain spectroscopy (THz-TDS). High birefringence in the range of 2.17 × 10−2 to 3.72 × 10−2 and low loss in the range of 0.12 to 0.18 cm-1 are demonstrated experimentally in the 0.2 to 0.27 THz transmission window. The highest birefringence is 3.72 × 10−2 at 0.22 THz and the corresponding loss is 0.18 cm-1. The THz HC-ARF shows the highest birefringence besides relatively low loss compared to similar THz HC-ARFs reported recently.
25 April 2024 in IEEE Transactions on Terahertz Science and Technology
The present paper demonstrates a novel partial negative curvature hollow-core fiber for low-loss terahertz transmission. In the optimized fiber structure, the tubes in the vertical direction are replaced by plate-like dielectric sheets, thereby achieving low loss and low blocked risk of 3D printing, while retaining a small fiber hollow core and fiber diameter. The 3D printed fiber is characterized by a terahertz time-domain spectroscopy (THz-TDS) system. The obtained transmission spectrum demonstrates the mode beating phenomenon and its peak position varies periodically with fiber length at short distances. The thin antiresonant walls endow the fiber with two broad low-loss windows of 0.2–0.4 THz and 0.55–0.85 THz. Besides, the x-polarization and y-polarization waves achieve minimum losses of 16.2 dB/m@0.28 THz and 16.0 dB/m@0.29 THz, respectively. Furthermore, our fiber has low experimental dispersions, namely −0.18±1.1 ps/THz/cm (x-pol) and 0.67±0.77 ps/THz/cm (y-pol). The experimental losses and dispersions match well with the simulation results. Additionally, the simulation results reveal that the fiber has the potential to attain a high birefringence of 10 −3 .
An accurate as well as highly sensitive label-free chemical sensing platform for the detection of various metal ions was demonstrated. The chemical sensor was derived from the micro-tapered long-period fiber grating (MLPG) by depositing graphene oxide (GO) by chemical-bonding and optical-tweezer effects. The enhancement in refractive index (RI) sensitivity as well as reusability was obtained by evaluating the deposition thickness in the range of approximately 97.7 to 158.9 nm. Based on the analysis of adsorption principles, the enhanced RI sensitivity leads to a limit of detection as low as 3.2 ppb. The highest sensitivities for the cases studied using sodium and manganese ions in a wide concentration range of 1 ppb to 1 × 106 ppb are respectively 2.2 × 10−3 dB per ppb and 3.2 × 10−3 dB per ppb. Mixture samples were also studied to evaluate the properties of sensing the doped ions. This demonstration of GO modified MLPG is bound to find potential applications that require sensing of mixed samples and illustrates significant importance in developing cost-effective, label-free, reusable, and real-time chemical sensors.
We report the Ni2+ heavy metal sensor by graphene oxide (GO) functionalized micro-tapered long-period fiber grating (MTLPG) where the light-matter interaction is enhanced. With high-quality GO coating on fiber with strong adhesion and controllable thickness, the GO coated MTLPG (GMTLPG) demonstrated resonant wavelength shift and intensity change, which corresponding to the sensitivity up to 5.12×10-4 nm/ppb and 3.07×10-4 dB/ppb, respectively. Moreover, the limits of detection are separately to be 2.5 ppb and 0.27 ppb, operating in wider concentration range from 1 ppb to 1×107 ppb. The proposed optical platform can be developed for superior chemical sensing applications.
In this paper, we present a microstructured optofluidic in-fiber Raman sensor for the detection of quinolone antibiotic residue in a water environment based on Ag surface-enhanced Raman scattering (SERS) substrate grown on the surface of the suspended core of micro-hollow optical fiber (MHF). Here, MHF has a special structure with a suspended core and a microchannel inside, which can become a natural in-fiber optofluidic device. Meanwhile, the self-assembled Ag SERS substrate can be grown on the suspended core’s surface through chemical bonds, forming a microstructured optofluidic device with a Raman enhancement effect. Therefore, it can effectively detect the Raman signal of unlabeled trace quinolone antibiotic residue (ciprofloxacin and norfloxacin) inside the optical fiber. The results show that the ciprofloxacin and norfloxacin detection limits (LOD) are and , respectively. Compared with the maximum residue limit ( ) stipulated by the European Union, the results are much lower, and an ideal quantitative relationship can be obtained within the detection range. Significantly, this study provides an in-fiber microstructured optofluidic Raman sensor for the label-free detection of quinolone antibiotic residue, which will have good development prospects in the field of antibiotic water pollution environmental detection.