Andre Conde Vazquez

Mr. Andre Conde Vazquez

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 May 2016 in Journal of Hydroinformatics
Verified
Journal Article
Open access
PDF file
Luis CeaLuis Cea
Luis Cea
MBMaría Bermúdez
María Bermúdez
JPJ. Puertas
J. Puertas
EBErnest Blade
Ernest Blade
GCG. Corestein
G. Corestein
Reza AhmadianReza Ahmadian
Reza Ahmadian
This paper presents a new freeware simulation tool (IberWQ) for 2D water quality modelling in rivers and non-stratified estuaries. The model computes the spatial and temporal evolution of several species and variables which are relevant for the evaluation of the environmental status of rivers and estuaries, including: Escherichia coli, dissolved oxygen, carbonaceous biochemical oxygen demand, organic nitrogen, ammoniacal nitrogen, nitrate–nitrite nitrogen, water temperature and salinity. A depth-averaged transport equation is solved for each variable with a mass conservative unstructured finite volume solver. IberWQ is fully coupled to the hydrodynamic module of the software Iber, a freeware simulation tool for solving the 2D shallow water equations. Both models are integrated in the same windows graphical environment, including several tools which allow the user to generate unstructured meshes adapted to the site topography, define spatially variable input parameters and visualize model outputs. We present four application examples to illustrate the possibilities of the software for the dynamic simulation of water quality in rivers and estuaries.

30 August 2021 in Water
Verified
Journal Article
Open access
PDF file
Fernando SalazarFernando Salazar
Fernando Salazar
AVAndre Conde Vazquez
Andre Conde Vazquez
Joaquín Irazábal GonzálezJoaquín Irazábal González
Joaquín Irazábal González
David J. Vicente GonzálezDavid J. Vicente González
David J. Vicente González
Dam safety assessment is typically made by comparison between the outcome of some predictive model and measured monitoring data. This is done separately for each response variable, and the results are later interpreted before decision making. In this work, three approaches based on machine learning classifiers are evaluated for the joint analysis of a set of monitoring variables: multi-class, two-class and one-class classification. Support vector machines are applied to all prediction tasks, and random forest is also used for multi-class and two-class. The results show high accuracy for multi-class classification, although the approach has limitations for practical use. The performance in two-class classification is strongly dependent on the features of the anomalies to detect and their similarity to those used for model fitting. The one-class classification model based on support vector machines showed high prediction accuracy, while avoiding the need for correctly selecting and modelling the potential anomalies. A criterion for anomaly detection based on model predictions is defined, which results in a decrease in the misclassification rate. The possibilities and limitations of all three approaches for practical use are discussed.

1 January 2017 in Engineering Applications of Computational Fluid Mechanics
Verified
Journal Article
Open access
MBMaría Bermúdez
María Bermúdez
Luis CeaLuis Cea
Luis Cea
JPJerónimo Puertas
Jerónimo Puertas
AVAndre Conde Vazquez
Andre Conde Vazquez
AMAna Martín
Ana Martín
JBJavier Baztán
Javier Baztán
The design of intake-outlet structures for pumped-storage hydroelectric power plants requires site-specific location and geometry studies in order to ensure their satisfactory hydraulic performance. This article presents the numerical and physical model studies conducted on the lower intake-outlet of Belesar III power station in Northwest Spain. The proposed location of this structure in a narrow reservoir and at a shallow depth is particularly challenging and required the analysis of both the near-field and far-field flow dynamics in the reservoir. First, the hydrodynamics of the reservoir were studied with a 2D shallow water model. The location of the intake was found to be suitable, with adequate flow conditions in the reservoir even for the lower operating water levels. The intake could be fed with the maximum pumping discharge without being limited by the reservoir’s hydraulics. Second, the flow in the near-field was investigated by complementary use of 3-dimensional numerical simulations and reduced-scale physical modeling. The results allowed the verification of the submergence requirements and the comparison of geometry alternatives. In comparison with the initial design, the final proposed design shows a more symmetrical approach flow into the structure during pumping mode, resulting in a more homogenous flow distribution between the openings and reduced head loss. This study can provide guidance in the application of hydraulic modeling procedures to locate and design intake-outlet structures in existing lakes or reservoirs and to evaluate potential limitations on water levels, inflows and outflows. It can be useful during planning stages of power plants to aim for the shortest possible waterways between the reservoirs while ensuring adequate flow conditions.

22 January 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AVAndre Conde Vazquez
Andre Conde Vazquez
Miguel Á. ToledoMiguel Á. Toledo
Miguel Á. Toledo
ESEduardo Salete
Eduardo Salete
It is well established that the proper functioning of dams plays an important role in society. Therefore, as a fundamental part of their safety, the identification of anomalies by monitoring their deformations must be given special consideration. The ability to detect cracks based on monitoring device records depends largely on the number of devices included in the dam’s original design, their arrangement, and their accuracy. This paper aims to help determine the appropriate spacing and accuracy of the devices for detecting a given crack. For this purpose, numerical simulations of cracks that match the most likely cracks in arch dams are performed based on a real dam, ensuring that such cracks result in an opening wide enough to be of concern. Afterward, the study analyzes the impact of the length and depth of the crack and the accuracy and position of the monitoring device on the ability of the system to detect the crack.

27 August 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AVAndre Conde Vazquez
Andre Conde Vazquez
Miguel Á. ToledoMiguel Á. Toledo
Miguel Á. Toledo
ESEduardo Salete
Eduardo Salete
It is essential to understand how failure mechanisms work in arch dams and, in particular, their most common manifestation: cracking. In this paper, the different types of cracking are explained in terms of their causes and consequences. Then, an exhaustive literature review is carried out that results in a detailed compilation of the characteristics of 38 cracked arch dams from all over the world, including crack characteristics (zone, position, dimensions and probable cause). This review is restricted to only those dams for which information on the position of the cracks or dam displacements is publicly available. As part of the review, a brief summary of key data for each dam is included, as well as a compilation of published crack diagrams. The positions of the cracks of all the dams are classified using diagrams in relation to the type of dam and the origin of the crack. Finally, the distribution of some dam parameters and crack features is analyzed by studying the relationships between them.

4 March 2024 in Infrastructures
Verified
Journal Article
Open access
PDF file
AVAndre Conde Vazquez
Andre Conde Vazquez
ESEduardo Salete
Eduardo Salete
Miguel Á. ToledoMiguel Á. Toledo
Miguel Á. Toledo
Running a numerical model for a cracked arch dam that takes into account all the particularities of the materials and dam with a high level of detail has a great computational cost involved. For this reason, it is usual to simplify such a model in search of a simpler solution while preserving the characteristic of being representative, with all the particularities that the model of an arch dam has. A common simplification lies in not considering open transverse joints in the construction phase of a cracked dam. An aim of this study is to propose a methodology that combines open joints and cracking, something on which, to the authors’ knowledge, no studies have been published. An additional goal is a study of the need and adequacy of different approaches on performance (computational time) and its consequences for model accuracy. For this purpose, an accurate methodology for a stationary finite element method numerical simulation of deformations in cracked arch dams is presented. Using a tetrahedron mesh of a real dam, different simplifications commonly used in numerical models are compared. It is concluded that some of the standard simplifications produce a significant effect on the computation time and accuracy of the results.