For wet disk clutches, the energy input is strongly influenced by its friction behavior. However, the friction behavior cannot be simulated and therefore is mostly derived from experimental data for specific clutch systems. This paper presents a new approach for the identification and validation of linear friction models using analysis of variance (ANOVA) and stepwise regression. Therefore, we use experimental data of three different friction systems with paper- and carbon-based friction lining. The designed experiments support an efficient parameter-based analysis of the friction behavior. The obtained models can be used as an input for thermal simulations, for example, but can also support a better understanding of the main influencing factors and are applicable to various friction systems. For validation, the obtained models are applied to measured data. A good correspondence between the simulated and measured friction behavior can be shown for speeds in the investigated operating range. The presented procedure can be easily adapted, for different factors and operation modes, as well as other applications.

The safe and efficient torque transmission of wet disk clutch systems requires high coefficients of friction. To achieve good controllability and high comfort, a positive slope of the coefficient of friction over sliding velocity is ensured by a reasonable formulation of the lubricant and choice of the friction pairing. This results in low transmittable torque at low sliding velocities. Thus, the occurrence of unwanted micro-slip in dynamic operation modes must be considered for the design of safety-relevant clutch systems. This work presents a methodology for the holistic measurement of the friction behavior of wet disk clutches. It is suitable for numerous applications and supports a sound understanding of frictional properties in the range of sliding velocities occurring in brake shifts through forced slip operation down to static torque transmission. The experimental determination of the holistic friction behavior is crucial for developing optimized design guidelines for modern clutch systems.

Purpose: Industrial drivetrains use wet disk clutches for safe and reliable shifting. Advances over the past decades regarding the formulation of lubricants and the composition of friction materials have led to reliable clutch systems. In this context, the friction behavior is crucial for the correct operation of the clutch. Nevertheless, the friction behavior and its influencing factors are still the object of modern research. The purpose of this study is to investigate how the choice of the steel disk influences the noise vibration and harshness (NVH) behavior of wet industrial clutches. Design/methodology/approach: To investigate the influence of the steel disk on the friction and NVH behavior of industrial wet disk clutches, experimental investigations with relevant friction systems are conducted. These tests are performed at two optimized test rigs, guaranteeing transferable insights. The surface topography of the steel disk and the friction lining are measured for one friction system to identify possible relations between the surface topography and the friction behavior. Findings: The steel disk can influence the friction behavior of wet disk clutches. Using a different steel disk surface finish, corresponding results can show differences in the shudder tendency, leading to a nonfavorable NVH behavior – different gradients of the coefficient of friction over sliding velocity cause this phenomenon. Originality/value: This work gives novel insights into the friction and NVH behavior of industrial wet disk clutches. It supports engineers in the optimization of modern friction systems. Peer review: The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-02-2024-0054/

Tribolayer build-up was investigated on wet clutch steel disks with experiments in three different test levels of the tribological verification chain via X-ray photoelectron spectroscopy. A new characteristic value of the tribolayers was developed, i.e., the lateral elemental distribution uniformity. This value together with the parameters of additive elemental concentration as well as the thickness and the vertical composition of the layers were the basis for the subsequent correlation of the tribolayer properties with the tribological performance of clutch systems from different tests. One important finding was a non-zero threshold concentration of the additive elements calcium and phosphorous below which the clutch performance was unsatisfactory, even with a uniformly covered disk, concluding that the presence of some slightly higher additive element concentration seemed to stabilize the clutch performance. The importance of representative investigation area selection was demonstrated.