The paper presents the results of experimental and model research of powertrain system built with torsional vibration damper. The behaviour of powertrain system with and without vibration damper was shown in the conditions of acceleration and deceleration with different increases of rotational speed. Next, authors describe the process of building a mathematical model of such a system and its identification on the basis of experimental results. When examining the results obtained with empirical and model research, it has been shown that in the structural and parametric identification of model of such system, the main factor affecting the right development of the structure should be dynamic criterion, since the only use of static criteria leads to big errors. On the basis of such model we can make some structural solutions to the system to minimize torsional vibrations.
The aim of the study was to develop a new FEM (finite element method) model of a mandible with the temporal joint, which can be used in the numerical verification of the work of bonding elements used in surgical operations of patients with mandibular fractures or defects. Most of such types of numerical models are dedicated to a specific case. The authors engaged themselves in building a model that can be relatively easily adapted to various types of tasks, allowing to assess stiffness, strength and durability of the bonded fragments, taking into account operational loads and fatigue limit that vary in time. The source of data constituting the basis for the construction of the model were DICOM (digital imaging and communications in medicine) files from medical imaging using computed tomography. On their basis, using the 3D Slicer program and algorithms based on the Hounsfield scale, a 3D model was created in the STL (standard triangle language) format. A CAD (computer-aided design) model was created using VRMesh and SolidWorks. An FEM model was built using HyperWorks and Abaqus/CAE. Abaqus solver was used for FEM analyses. A model meeting the adopted assumptions was built. The verification was conducted by analyzing the influence of the simplifications of the temporomandibular joint in the assessment of mandibular strain. The work of an undamaged mandible and the work of the bonded fracture of the mandible were simulated.
Composite materials (fiber reinforced plastics, FRPs) are successfully utilized in the production of various mechanical devices, including land vehicles, marine vessels, and aircrafts. They are primarily used for the production of body parts and hulls. Due to their importance, certain requirements relating to the mechanical properties of the materials used must be met for such applications. One aspect of the passive safety of vehicles is the effects of a possible collision with another object. The behavior of the structure in such a case can be determined based on the coefficient of restitution, which is a measure of energy dissipation after an impact. This paper presents the results of measuring the value of the coefficient of restitution for the selected composite materials, utilizing various reinforcement materials including different types of fibers and wooden veneer. The selected materials included glass, carbon, Kevlar fibers, and veneer from exotic wood in an epoxy resin matrix. The tested samples were made using various methods in order to understand the influence of the technology on the value of the coefficient. The authors determined the coefficient values utilizing two methods based on the measurement of two different physical quantities. In the first case, the height of the rebound of the ram was measured using a fast digital camera; in the second case, the time between successive rebounds of the tool was measured, determined based on the signal from the acceleration sensor. The authors compared the results of the coefficient values obtained using these methods and examined the relationship between the rebound energy and the value of the coefficient of restitution. The results have been discussed, and some conclusions have been made. Among other things, it seems that both methods of measurement are interchangeable with regard to lower impact velocities corresponding to lower heights (up to 300 mm) of the drop of the ram used in the tests.
The crankshaft is exposed to numerous external extortions which generate bending, axial and torsional vibrations. Torsional vibrations are especially dangerous for a safe operation. They are generated by strongly dynamic loads, which come from the combustion processes of fuel-air mixture in cylinders and from the elements of drive system, and engine accessories. Until recently this problem concerned mainly the engines of high power, where dynamic effects generated the vibrations with amplitudes exceeding the limit values, which in effect led to failure of the engine. Crankshafts also significantly increased their torsional elasticity because of the common trend of reducing the engine mass. It resulted in the necessity of using the elements reducing the amplitude of torsional vibrations of the shaft. Rubber torsional vibration dampers are commonly used for this purpose. The author observed that while choosing torsional vibration dampers, the producers concentrated only on the criterion of reducing the amplitude of torsional vibrations below limit values. They forgot that the optimization criterion can be expanded in such a way so that a better effect can be obtained. What is more, safe and economical operation of the engine could be provided.
22 September 2025 in Eksploatacja i Niezawodność – Maintenance and Reliability
During machinery operation, load is often highly variable, which exerts an impact on how the machinery service life is reduced; hence the need for decreasing the variations in the load torque affecting the driving elements of machines. In order to achieve such reduction, the authors have developed a flexible clutch of innovative design. This paper provides a follow-up to the studies of the dynamic properties of the said clutch in terms of the analysis of the effect attributable to the input function waveform of the applied load on the dynamic response of the system, represented by the value of the accelerations of the drive system vibrations. The load variants analysed, with values of 500±250 Nm and 750±375 Nm (sinusoidal, triangular, and rectangular waveforms). On account of the fact that the flexible clutch was integrated with the drive system subject to the studies, it was found that the averaged maximum root mean square reductions of vibration accelerations in the measurement direction with the highest vibration accelerations (direction y) came as high as to 56.1%.