Stockwell transform(ST) time-frequency representation(ST-TFR) is a time frequency analysis method which combines short time Fourier transform with wavelet transform, and ST time frequency filtering(ST-TFF) method which takes advantage of time-frequency localized spectra can separate the signals from Gaussian noise. The ST-TFR and ST-TFF methods are used to analyze the fault signals, which is reasonable and effective in general Gaussian noise cases. However, it is proved that the mechanical bearing fault signal belongs to Alpha(α) stable distribution process(1 < α < 2) in this paper, even the noise also is α stable distribution in some special cases. The performance of ST-TFR method will degrade under α stable distribution noise environment, following the ST-TFF method fail. Hence, a new fractional lower order ST time frequency representation(FLOST-TFR) method employing fractional lower order moment and ST and inverse FLOST(IFLOST) are proposed in this paper. A new FLOST time frequency filtering(FLOST-TFF) algorithm based on FLOST-TFR method and IFLOST is also proposed, whose simplified method is presented in this paper. The discrete implementation of FLOST-TFF algorithm is deduced, and relevant steps are summarized. Simulation results demonstrate that FLOST-TFR algorithm is obviously better than the existing ST-TFR algorithm under α stable distribution noise, which can work better under Gaussian noise environment, and is robust. The FLOST-TFF method can effectively filter out α stable distribution noise, and restore the original signal. The performance of FLOST-TFF algorithm is better than the ST-TFF method, employing which mixed MSEs are smaller when α and generalized signal noise ratio(GSNR) change. Finally, the FLOST-TFR and FLOST-TFF methods are applied to analyze the outer race fault signal and extract their fault features under α stable distribution noise, where excellent performances can be shown.
1 January 2019 in Mathematical Problems in Engineering
The traditional spectral analysis method is used to study the characteristics of bearing fault signals in frequency domain, which is reasonable and effective in general cases. However, it is proved that the fault signals have heavy tails in this paper, which are α stable distribution, and 1 < α < 2, and even the noises belong to α stable distribution. Then the conventional spectral analysis methods degenerate and even fail under α stable distribution environment. Several improved frequency spectral analysis methods are proposed employing fractional lower order covariation or fractional lower order covariance in this paper, including fractional lower order Blackman‐Tukey covariation spectrum (FLOBTCS), fractional lower order periodogram covariation spectrum (FLOPCS), and fractional lower order welch covariation spectrum (FLOWCS). In order to suppress side lobe and improve resolution, we present novel fractional lower order autoregression (FLO‐AR) and fractional lower order autoregressive moving average (FLO‐ARMA) parameter model frequency spectrum methods, and the calculation steps are summarized. The proposed spectrum methods are compared with the existing methods based on second‐order statistics under Gaussian and SαS distribution environments, and the results show that the new algorithms have better performance than the traditional methods. Finally, the improved methods are applied to estimate frequency spectrums of the normal and outer race fault signals, and it is demonstrated that they are effective for fault diagnosis.
5 November 2017 in Circuits, Systems, and Signal Processing
The short time Fourier transform time‐frequency representation (STFT‐TFR) method degenerates, and the corresponding short time Fourier transform time‐frequency filtering (STFT‐TFF) method fails under α stable distribution noise environment. A fractional low order short time Fourier transform (FLOSTFT) which takes advantage of fractional p order moment is proposed for α stable distribution noise environment, and the corresponding FLOSTFT time‐frequency representation (FLOSTFT‐TFR) algorithm is presented in this paper. We study vector formulation of the FLOSTFT and inverse FLOSTFT (IFLOSTFT) methods and propose a FLOSTFT time‐frequency filtering (FLOSTFT‐TFF) method which takes advantage of time‐frequency localized spectra of the signal in time‐frequency domain. The simulation results show that, employing the FLOSTFT‐TFR method and the FLOSTFT‐TFF method with an adaptive weight function, time‐frequency distribution of the signals can be better gotten and time‐frequency localized region of the signal can be effectively extracted from α stable distribution noise, and also the original signal can be restored employing the IFLOSTFT method. Their performances are better than the STFT‐TFR and STFT‐TFF methods, and MSEs are smaller in different α and GSNR cases. Finally, we apply the FLOSTFT‐TFR and FLOSTFT‐TFF methods to extract fault features of the bearing outer race fault signal and restore the original fault signal from α stable distribution noise; the experimental results illustrate their performances.
31 December 2020 in Mathematical Problems in Engineering
The generated signals generally contain a large amount of background noise when the mechanical bearing fails, and the fault signals present nonlinear and non-Gaussian feature, which have heavy tail and belong to -stable distribution ( ); even the background noises are also -stable distribution process. Then it is difficult to obtain reliable conclusion by using the traditional bispectral analysis method under -stable distribution environment. Two improved bispectrum methods are proposed based on fractional lower-order covariation in this paper, including fractional low-order direct bispectrum (FLODB) method, fractional low-order indirect bispectrum (FLOIDB) method. In order to decrease the estimate variance and increase the bispectral flatness, the fractional lower-order autoregression (FLOAR) model bispectrum and fractional lower-order autoregressive moving average (FLOARMA) model bispectrum methods are presented, and their calculation steps are summarized. We compare the improved bispectrum methods with the conventional methods employing second-order statistics in Gaussian and distribution environments; the simulation results show that the improved bispectrum methods have performance advantages compared to the traditional methods. Finally, we use the improved methods to estimate the bispectrum of the normal and outer race fault signal; the result indicates that they are feasible and effective for fault diagnosis.
Mechanical fault vibration signal is a typical non‐Gaussian process, they can be characterized by the infinite variance process, and the noise within these signals may also be the process in complex environments. The performance of the traditional cross‐term reduction algorithm is compromised, sometimes yielding incorrect results under the infinite variance process environment. Several robust fractional lower order time–frequency representation methods are proposed including fractional low‐order smoothed pseudo Wigner (FLOSPW), fractional low‐order multi‐windowed short‐time Fourier transform (FLOMWSTFT), and improved fractional low‐order multi‐windowed short‐time Fourier transform (IFLOMWSTFT) utilizing fractional low‐order statistics and short‐time Fourier transform (STFT) to mitigate cross‐terms, enhance time–frequency resolution, and accommodate the infinite variance process environment. When compared to traditional methods, simulation results indicate that they effectively suppress the pulse noise and function effectively in lower mixed signal noise ratio (MSNR) in an infinite variance process environment. The efficacy of the proposed time–frequency algorithm is validated through its application to mechanical bearing outer ring fault vibration signals contaminated with Gaussian noise and subjected to an α infinite variance process.