Electric vehicles (EVs) are currently emerging as alternative vehicles due to their high energy efficiency and low emissions during driving. However, regarding the raising concern, the safety of EVs can further be improved before they completely replace conventional vehicles. This paper focuses on reviewing the safety requirements of EVs, especially those powered by Li-ion battery, based on the mechanical abuse tests from the international standards, national standards, regulations and other laboratories standards, and safety of occupants from the regulations and safety programs. Moreover, the publicly reported real-world fire incidents of EVs based on road crashes were collected and reviewed. The objective is to highlight the gap and challenges arose between the current safety requirements and real-world fire incidents of EVs and provide the way for assisting the future research in the area of EV safety, particularly light duty passenger vehicle. The serious challenges observed include high impact speed, multi-crashes per incident, multiple barriers of different types involved in the accident, and post-crash safety (serious injury and demise) of occupants and rescue teams. While addressing these challenges, this review will aid researchers and manufacturers working in batteries, EVs, and fire safety engineering to narrow the gap and enhance the safety of future EVs in areas of battery materials, fire extinguishing, and vehicle’s body structure.

Understanding the thermal characteristics of lithium-ion batteries (LIBs) under various operating situations is critical for improving battery safety. Although the application of LIBs in the real world is mostly transient, many previous models consider the phenomenon of the constant state. This study examines thermal behavior by developing a 2D electrothermal model to predict the thermal behavior of LIBs with overcharge abuse in high thermal conditions. The 18,650 cylindrical LiCoO₂ graphite is investigated in a thermally controlled chamber at 35, 50, and 60 °C with a K-type thermocouple mounted on the LIB surface under charging rates of 1C, 2C, and 3C to acquire quantitative data regarding the thermal response of LIBs. Maximum critical temperatures are found at 62.6 to 78.9 °C, 66.4 to 83.5 °C, and 72.1 to 86.6 °C at 1C, 2C, and 3C, respectively. Comparing simulation analysis and experimental conditions, the highest relative error of 1.71% was obtained. It was found that relative errors increase as the charging rate increases. Moreover, increasing the charging current and surrounding temperature significantly increases the battery’s surface temperature. Furthermore, battery heat distribution appears almost uniform and tends to increase towards the positive terminal because cathode material is highly resistant. In addition, increasing the LIB heat transfer coefficient could positively improve the battery performance by eventually curbing the rise in battery temperature and reducing non-uniformity.

This paper presents the implementation of natural gas vehicles (NGVs) in Tanzania’s road transportation sector. The peculiarity of this analysis is the evaluation of the technical and economic performance of the converted gasoline and diesel engines to use compressed natural gas (CNG) as the cleanest-burning hydrocarbon. The technical performance involved vehicle mileage (MiCNG), fuel consumption (Fcons), speed drop, engine fuel enhancement (Fenh), and fuel saving, while the economic performance involved conversion cost (Cc), fuel cost saving (FCsaving), and payback (PB). Considering the conversion of gasoline vehicles, the MiCNG could reach an average of 100 to 500 km per filling, depending on the CNG cylinder size. The Fenh and fuel saving were ranging between 1.9 and 3.9 and 71 and 78%. With a proportion of 30:70 diesel-CNG fuel, the heavy-duty truck with 180 kg of CNG could reach 1300 km, saving about 440 L, which is 78.6% per roundtrip, while the medium passenger car with 15 kg of CNG could reach 350 km, presenting a fuel saving of about 75%. From an economic point of view, gasoline retrofitted NGVs cost about 50 to 200 TZS/km, yielding a fuel cost saving of up to 79% and starting to pay off between 2 and 7 months or 10,000 and 40,000 km, depending on the engine capacity. Considering dual fuel, the heavy-duty truck consumes about 496 TZS/km, saving about 62.3% of diesel fuel and starting to pay off after 2.5 months or 29,304 km. To conclude, NGV technologies have been successfully implemented in Tanzania’s road transportation sector, presenting significant fuel savings and reducing reliance on imported oil. While taking measures, this study paves a way for Tanzania and other sub-Saharan countries to promote NGV growth.