In this paper, we propose a novel variable pole pitch (VPP) electromagnetic (EM) propulsion technique using a series of ladder-slot-secondary double-sided linear induction motors (LS-secondary DLIMs). An equivalent circuit is developed for the LS-secondary DLIM, which considers the distribution of the eddy current in the ladders and the end effect. This equivalent circuit forms the basis for the subsequent design, numerical analysis, and optimization. The primary purpose of the VPP EM propulsion system is to address several obstacles encountered in high-speed large-thrust applications of LIMs, such as power factor improvement, optimization considering supply frequency constraint and operating kinetics, etc. The equivalent circuit of the LS-secondary DLIM, i.e., the theoretical foundation of the VPP EM propulsion, has been validated via simulation and experimentation on a small-scale platform, which proves that the numerical analysis of the VPP EM propulsion is effective.
Bottom-fixed vertical rotating devices are widely used in industrial and civilian fields. The free upside of the rotor will cause vibration and lead to noise and damage during operation. Meanwhile, parameter uncertainties, nonlinearities and external disturbances will further deteriorate the performance of the rotor. Therefore, in this paper, we present a rotor orientation control system based on an active magnetic bearing with adaptive control to restrain the influence of the nonlinearity and uncertainty and reduce the vibration amplitude of the vertical rotor. The boundedness and stability of the adaptive system are analyzed via a theoretical derivation. The impact of the adaptive gain is discussed through simulation. An experimental rig based on dSPACE is designed to test the validity of the rotor orientation system. The experimental results show that the relative vibration amplitude of the rotor using the adaptive controller will be reduced to ∼50% of that in the initial state, which is a 10% greater reduction than can be achieved with the nonadaptive controller. The control approach in this paper is of some significance to solve the orientation control problem in a low-speed vertical rotor with uncertainties and nonlinearities.
Vertical rotating devices may cause large amplitude vibration or even lose stability during low-speed operation. This paper discusses the control approaches of a low-speed vertical rotor orientation system based on the electromagnetic levitation. In the paper, according to the gyro mechanics principle, the nonlinear dynamic equations of the vertical rotor system are established and the kinetic characteristics of the system in the gravitational field are analyzed. Considering the uncertainties of the system, a position control strategy used for the vertical rotor orientation system is presented based on the gyroscope effect. Finally, the simulation of the control system and experiment system are carried out and set up to verify the feasibility and effectiveness of the control method. Results show that the presented control approach is able to achieve a stable positioning control for the spinning rotor.