The purpose of this review paper is to show the possibilities of carbonate reservoir characterization using well logging and laboratory measurements. Attention was focused on standard and new methods of well logging acquisition and interpretation including laboratory experiments to show a part of the history of carbonate rock investigations as hydrocarbon or water reservoirs. Brief information on the geology, mineralogy and petrography of carbonate rocks was delivered. Reservoir properties, i.e., porosity (including fracturing), permeability, and saturation, were defined to emphasize the specific features of carbonates, such as fractures, and vugs. Examples of methodologies were selected from the commonly used laboratory techniques (thin sections examination, mercury and helium porosimetry, X-ray diffraction—XRD) combined with the standard well logs (bulk density—RHOB, neutron porosity—NPHI, sonic slowness—DT, and deep resistivity—Rd) to show the methods that have been used since the very beginning of the scientific and engineering studies of carbonates. Novelty in well logging, i.e., resistivity and acoustic imaging, nuclear magnetic resonance–NMR, dipole shear sonic imaging–DSI, and a spectral neutron-gamma log-geochemical device–GLT combined with modern laboratory investigations (NMR laboratory experiments, scanning electron microscopy SEM), showed how continuous information on mineral composition, porosity and saturation could be obtained and juxtaposed with very detailed laboratory data. Computed X-ray tomography (CT) enabling the 2D and 3D analyses of pores and fractures was presented as a quantitative methodology, effective in pore space characterization, revealing rock filtration abilities. Deep learning and artificial intelligence were used for joining various types of data. It was shown that thanks to new computational technologies original data from very small samples (micro scale), extensively describing the flow ability of the reservoir, could be extended to mezzo scale (core samples) and macro scale (well log images). Selected examples from the published papers illustrated the review. References cited in the text, together with the issues included in them, were the rich source of the practical knowledge processed These were checked by the authors and could be used in other projects.

The article presents the methodology for the qualitative determination of fracture zones in the profiles of carbonate formations, based on the complex fracture analysis (CFA) method. Three additive fracture ranges were distinguished, characterized by successively increasing aperture and fracture length values, operatively named micro, meso and macro. Furthermore, the quantitative characterization of fractures with different apertures was done. The methodology of laboratory data integration, fracture porosity and fracture permeability measurements performed on thin section and polished section was described as part of the quantitative well logging data interpretation procedure which uses the FPI (fracture porosity index) parameter. The research was performed in the Lower Carboniferous limestone formation that builds the Paleozoic basement of the Carpathian orogeny. An original software dedicated to the analysis of the wellbore images, obtained with the XRMI Halliburton scanner, was used to identify the presence of macro-fractures, determine their aperture and estimate fractures porosity and permeability in the profile of the analyzed rock formation. As a result of the work, postulates regarding the methodology for collecting research material were formulated, in particular: the scope of different laboratory core samples measurements and well log types. The principles of the optimal methodology for identifying fractured zones and quantitative evaluation of petrophysical parameters of recognized fracture systems were defined.

The complexity of shale formation interpretation requires an accurate evaluation of a detailed petrophysical model in association with the analysis of the geomechanical properties. Mineralogy plays an important role in controlling shale’s mechanical properties, among which one of the most problematic parameters to establish is the Biot’s coefficient. Although, this parameter is necessary to determine the magnitude of the effective stresses acting in the reservoir, it is not included in the standard protocols used in Poland. This paper presents a comprehensive petrophysical and geomechanical evaluation of the unconventional reservoirs of lower Paleozoic age formation: lower Silurian and Ordovician deposits located in the onshore part of the Baltic Basin (Poland). In this study, the Biot’s coefficient from well-log data was calculated. Initially, a calibrated rock-physics model was derived to provide a set of relationships between the elastic and petrophysical properties. Based on an accurate, calibrated petrophysical model, the effective bulk modulus along with the Biot’s coefficient and horizontal stresses were calculated. Ultimately, the tectonic regime was determined. Using full-waveform sonic data analysis, the horizontal anisotropy was estimated. The directions of maximum and minimum horizontal stress were established based on several X-tended Range Micro Imager images of breakout structures and drilling-induced fractures.

This article presents a novel methodology for data integration including laboratory data, the results of standard well logging measurements and interpretation and the interpretation of XRMI imager data for determination of the porosity and permeability of the fracture system in carbonate rock. An example of the results of the micro computed tomography applied for carbonate rock is included. Data were obtained on the area of the Polish Lowland Zechstein Main Dolomite formation. The input set of data included the results of mercury injection porosimetry (MICP), thin section and polished section analysis, well logging measurements and comprehensive interpretation and micro computed tomography. The methodology of the macrofractures’ analysis based on borehole wall imagery as well as estimation of their aperture was described in detail. The petrophysical characteristics of the fracture systems were analyzed as an element of standard interpretation of well logging data along a carbonate formation. The results of permeability determination, with micro-, mezzo- and macrofractures’ presence in the rock taken into consideration, were compared with outcomes of the drill stem tests (DSTs).

We have developed a Lower Palaeozoic petroleum systems analysis in the selected zones of the Polish section of the Baltic Basin (onshore and offshore), which we carried out to assess the potential of shale rock formations as unconventional reservoirs. The areas of the Baltic Basin, which we analyzed represent a diversity of shale formations burial depths and thus different advancement of sediments compaction and organic matter transformation. Methods of dynamic petroleum systems modeling were applied with a 3D modeling workflow (PetroMod suite software). We considered an extensive array of data, including results of geochemical and petrophysical laboratory measurements, geophysical borehole data and, in selected locations - 3D seismic data Five potentially perspective shale rock intervals (Silurian [2], Ordovician [2], and Upper Cambrian [1]) are identified and interpreted in terms of their geochemical and petrophysical properties. We calibrated the petroleum system models in terms of proper reproduction of diagenetic processes (pore pressure and porosity), thermal conditions (vitrinite reflectance, temperature), and kerogen kinetic model (organic matter transformation ratio, types of hydrocarbons generated). The results of the petroleum system simulations reveal that for the predominant part of the analyzed area, the achieved level of kerogen thermal maturity determines the generation of liquid hydrocarbons, which results in the present-day saturation of shale formations mainly with crude oil. We concluded that the highest generation yields as well as present-day hydrocarbons in place are observed for Ordovician Sasino Formation (onshore and offshore), Silurian/Llandovery Jantar member (onshore), and Upper Cambrian (alum shales) formation. Furthermore, a significant variation in the mass/volumes of accumulated hydrocarbons is observed within each of the shale formations being considered.

This article presents a new analytical procedure for pre-selecting gas wells for water shut-off treatments based on available at hand results of an analysis of integrated geological, reservoir and exploitation data. Attention was paid to assess the possibility of the appearance of cross flows between layers in the near wellbore zone. Their appearance always eliminated the well as a candidate for the treatment. The basis for assessing the possibility of the emergence of cross flows was based on the assessment of the presence or absence of impermeable barriers (e.g., shales or anhydrite) in intervals, completed by perforation. For this assessment, well logging data were used, which were carried out in different years with the use of various types of probes. Based on modified quantitative and qualitative interpretation techniques, permeable and impermeable layers were separated in the analysed borehole sections. In some cases, in the absence of other data, well logs are the only source of information from which a vertical profile of horizontal permeability can be made. The article describes the verification process carried out for the eight wells situated in the area of the Carpathian Foredeep, which have been preselected by the operator. As part of this procedure, the available geological, reservoir and exploitation data were used, and a preliminary assessment of the possibility of implementing the obtained results into other wells and gas fields in the area of the Carpathian Foredeep was carried out. On the basis of the well ranking, two out of the eight analysed wells were recommended as candidates for water shut-off treatment.