Ahmad Nayan

Mr. Ahmad Nayan

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 April 2022 in Malikussaleh Journal of Mechanical Science and Technology
Verified
Journal Article
Open access
PDF file
ANAhmad Nayan
Ahmad Nayan
THTeuku Hafli
Teuku Hafli
Material komposit karena keunikannya yang memliki sifat mekanik dan sifat fisik berbanding terbalik dengan material logam menjadi daya tarik tersendiri bagi para peneliti untuk menemukan komposisi yang sesuai gabungan beberapa material. Sifat mekanik yang paling menonjol dari material komposit polimer adalah memili kekuatan yang lebih besar dari materila logam tapi memiliki bobot berat yang lebih ringan. Penggunaan material alami sebagai penguat semakin banyak dilakukan penelitian untuk menghindari penggunaan bahan sintesis yang bersifat tidak dapat perbaharui seperti serat gelas. Cangkang kerang yang memiliki sifat keras dan ringan merupakan salah satu alternatif penguat pada bahan komposit. Penenlitian ini menggunakan partikel cangkang kerang sebagai penguat material komposit dengan variasi fraksi volume 20%, dan 40% untuk menganalisa bentuk mikro struktur yang menyebabkan menurunya kekautan tarik. Spesimen dipersiapkan dengan menggunakan metode pencampuran manual. Spesimen untuk pengujian uji tarik merujuk pada standar ASTM D638–02 bertujuan untuk mengetahui sifat mekanik komposit partikel cangkang kerang dan mengetahui bentuk patahan struktur mikro material komposit melalui pengujian morfologi SEM (Scanning Electron Microscope). Hasil dari pengujian kekuatan tarik pada fraksi volume 40% dengan nilai rata-rata sebesar 103 MPa, dengan regangan tarik 0,69%, sementara pada rata-rata dengan nilai sebesar 102,57 MPa, regangan tarik sebesar 0,62%. Berdasarkan hasil pengamatan morfologi patahan dengan menggunakan SEM. Menunjukkan hasil patahan yang terbagus terdapat pada komposit dengan ukuran pengisi 200 Mesh dan komposisi pengisi 40%.

18 October 2021 in Acoustics
Verified
Journal Article
Open access
PDF file
ANAhmad Nayan
Ahmad Nayan
Tai KamTai Kam
Tai Kam
A new vibro-acoustic method is presented to analyze the sound radiation behavior of orthotropic panel-form sound radiators using strip-type exciters to exert line loads to the panels for sound radiation. The simple first-order shear deformation theory together with the Ritz method is used to formulate the proposed method that makes the vibro-acoustic analysis of elastically restrained stiffened orthotropic plates more computationally efficient than the methods formulated on the basis of the other shear deformation theories. An elastically restrained orthotropic plate consisting of two parallel strip-type exciters was tested to measure the experimental sound pressure level curve for validating the effectiveness and accuracy of the proposed method. The resonance characteristics (natural frequency and mode shape) detrimental to sound radiation are identified in the vibro-acoustic analysis of the orthotropic plate. For any orthotropic sound radiation plate, based on the detrimental mode shapes, a practical procedure is presented to design the line load locations on the plate to suppress the major sound pressure level dips for enhancing the smoothness of the plate sound pressure level curve. For illustration, the sound radiation enhancement of orthotropic plates with different fiber orientations for aspect ratios equal to 3, 2, and 1 subjected to one or two line loads is conducted using the proposed procedure. The results for the cases with two line loads perpendicular to the fiber direction and located at the nodal lines of the major detrimental mode shape may find applications in designing orthotropic panel-form speakers with relatively smooth sound pressure level curves.

18 April 2023 in International Journal of Engineering, Science and Information Technology
Verified
Journal Article
Open access
PDF file
ANAhmad Nayan
Ahmad Nayan
MYMuhammad Yusuf
Muhammad Yusuf
DSDeassy Siska
Deassy Siska
The specimens were prepared with polyester polymer reinforced with natural fiber from three types of bamboo, namely Gigantochloa Apus, Bambusa vulgaris, and Bambusa blumeana. Their tensile properties were compared and investigated. In this paper, the specimen utilization of hand-wet layup processes of polyester resin with natural fibers. The fibers were treated with 5% NaOH solution to remove hemicellulose and create better debonding between matrix and fiber. Bamboo-reinforced composite of 3 types of bamboo with fractions 60% volume is thorn bamboo, Bambusa vulgaris, Gigantochloa Apus, and bamboo wipe without alkali. Of the three types of bamboo, the highest tensile strength of Gigantochloa Apus was soaked using NaOH with an average value of 37.06 MPa, with a tensile strain of 4.11%. In contrast, the lowest tensile strength value is Gigantochloa Apus which was not immersed in NaOH with an average of 13.79 MPa, a tensile strain of 2.54%. This matter shows the effect of immersion on tensile strength bamboo fiber composite. The results of the tensile strength of each type of bamboo obtained in this research, among others, bamboo thorn's tensile strength of 22.81 MPa, Bambusa vulgaris tensile strength of 16.69 MPa, bamboo apus 37.06 MPa, and Gigantochloa Apus without alkali 13.79 MPa. The observations show that Gigantochloa Apuscomposites are suitable for use as alternative tensile materials.

26 March 2025 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
ANAhmad Nayan
Ahmad Nayan
NINurul Islami
Nurul Islami
DSDeassy Siska
Deassy Siska
The role of plastic packaging in protecting food is considerable, but issues such as non-biodegradable properties, recycling problems, and leaching of harmful chemicals on food and soil create serious concerns for human health and the environment. Global packaging protocols and awareness about plastic packaging also make it necessary to develop new packaging materials that focus on the environment, food quality and safety. Therefore, urgent attention is needed for alternative biodegradable food packaging materials, so this study aims to fabricate biofoam from rice husk waste using starch adhesive. The main material used was rice husk with size variations of 40, 60 and 80 mesh. The weight ratio between husk and adhesive is 1:2. All biofoam products were analyzed for physical properties (water absorption), heat resistance and biodegradability. Based on the research that has been done, biofoam of rice husk waste with starch adhesive has the potential to be used as a substitute for synthetic polymers with the sticking method with a compressive strength of 100 kg at a temperature of 102°C. The best biofoam is in the variation of 80 mesh particles with added weight after testing water absorption of 15%, heat resistance with added weight of 1%.

1 September 2023 in TRANSMISI
Verified
Journal Article
Open access
PDF file
TPTeguh Purnomo
Teguh Purnomo
ANAhmad Nayan
Ahmad Nayan
MSMuhammad Sayuthi
Muhammad Sayuthi
NINurul Islami
Nurul Islami
ARAbdul Rahman
Abdul Rahman
This research aims to identify the absorbance and consistency of the efficiency of DSSC (Dye-Sensitized Solar Cells). The study was conducted with variations of chlorophyll-anthocyanin mixture using different volumes of dye solutions: 10 ml of a cassava leaf and 20 ml of red dragon fruit, 20 ml of a cassava leaf and 10 ml of red dragon fruit, and 10 ml of a cassava leaf and 10 ml of red dragon fruit. The Dye-Sensitized Solar Cell system consists of natural dye as the colorant, electrolyte solution, two FTO glass substrates with dimensions of 2.5 cm x 2.5 cm, which function as working electrodes coated with titanium dioxide as the semiconductor using the doctor blade method, and counter electrode coated with carbon. All components of the Dye-Sensitized Solar Cell are arranged in a sandwich-like structure, with the counter electrode facing the working electrode and clamped together using paper clips. The highest absorbance value was obtained with the variation of 20 ml red dragon fruit and 10 ml cassava leaf compared to other mixtures. The highest efficiency and power of the Dye-Sensitized Solar Cell were also obtained with 20 ml of red dragon fruit and 10 ml of cassava leaf

4 August 2024 in Mechonversio: Mechanical Engineering Journal
Verified
Journal Article
Open access
PDF file
MHMuhammad Habibi
Muhammad Habibi
AAAkmal Akmal
Akmal Akmal
ANAhmad Nayan
Ahmad Nayan
MUMuhammad
Muhammad
ALAlchalil
Alchalil
Penelitian ini bertujuan untuk menguji kekuatan sambungan las V pada baja AISI 1050 dengan elektroda 7016 menggunakan proses pengelasan SMAW, serta untuk melakukan pengujian tarik dengan standar ASTM E8 dan pengujian impak dengan standar ASTM E23. Variasi arus yang digunakan dalam proses pengelasan adalah 100A, 125A, dan 150A. Hasil penelitian menunjukkan bahwa arus pengelasan memiliki dampak signifikan terhadap kekuatan sambungan las. Pengujian menunjukkan bahwa arus 150A menghasilkan tegangan tarik tertinggi dengan nilai rata-rata 63,76 kgf/mm², sementara arus 100A menghasilkan tegangan tarik terendah dengan nilai rata-rata 38,13 kgf/mm². Untuk pengujian impak, arus 150A memberikan ketahanan impak terbaik dengan nilai kekuatan impak rata-rata 3,68 J/mm², sedangkan arus 100A menghasilkan kekuatan impak terendah dengan nilai rata-rata 1,53 J/mm². Kesimpulan dari penelitian ini adalah bahwa peningkatan arus menghasilkan peningkatan panas yang dihasilkan, yang memungkinkan elektroda mencair dengan lebih sempurna, sehingga menghasilkan sambungan las yang lebih kuat. Namun, peningkatan arus tidak selalu menghasilkan sambungan yang lebih baik; ada kondisi di mana hasil las dapat rusak jika arus yang digunakan terlalu besar, karena setiap material memiliki titik lebur yang berbeda. Pengelasan dapat mengalami kerusakan jika panas yang dihasilkan melebihi titik lebur material yang digunakan.