Living cells interfaced with a range of polyelectrolyte coatings, magnetic and noble metal nanoparticles, hard mineral shells and other complex nanomaterials can perform functions often completely different from their original specialisation. Such “cyborg cells” are already finding a range of novel applications in areas like whole cell biosensors, bioelectronics, toxicity microscreening, tissue engineering, cell implant protection and bioanalytical chemistry. In this tutorial review, we describe the development of novel methods for functionalisation of cells with polymers and nanoparticles and comment on future advances in this technology in the light of other literature approaches. We review recent studies on the cell viability and function upon direct deposition of nanoparticles, coating with polyelectrolytes, polymer assisted assembly of nanomaterials and hard shells on the cell surface. The cell toxicity issues are considered for many practical applications in terms of possible adverse effects of the deposited polymers, polyelectrolytes and nanoparticles on the cell surface.

Biomimetic architectural assembly of clay nanotube shells on yeast cells was demonstrated producing viable artificial hybrid inorganic-cellular structures (armoured cells). These modified cells were preserved for one generation resulting in the intact second generation of cells with delayed germination.

Composite films based on cellulose, chitosan and halloysite clay nanotubes were prepared using a solution casting method, which allowed for a uniform distribution of nanotubes within the material and provided control over the morphology of the composite. The mechanical performance of these bio nanocomposites is influenced by humidity and the nanotubes showed a plasticisation effect on the polymeric matrix. The composites of chitosan and halloysite nanotubes (HNTs), with modified hydrophobic inner lumens, resulted in a technique for controlled and sustainable surface cleaning. Lignocellulose wood microfibres modified with HNTs were also produced by a layer-by-layer assembly. The obtained material represents a composite well suited for making paper sheets for biomedical applications, where enhanced porosity can be crucial. Toxicity tests carried out on biopolymer–halloysite composites showed that these nanocomposites are safe for cell cultures up to 0·5 mg/mL of free clay nanotubes.

Fabrication of “cyborg” cells (biological cells with surfaces functionalised using a variety of nanomaterials) has become a fascinating area in cell surface engineering. Here we report a simple procedure for fabrication of polycation-stabilised 50 nm silver nanoparticles and application of these nanoparticles for fabrication of viable “cyborg” microbial cells (yeast and bacteria). Cationic polymer-stabilised nanoparticles electrostatically adhere to microbial cells producing an even monolayer on the cell walls, as demonstrated using enhanced dark-field microscopy, atomic force microscopy and microelectrophoresis. Our procedure is exceptionally fast, being completed within 20 min after introduction of cells into nanoparticle aqueous suspensions. Polymer-stabilised silver nanoparticles are highly biocompatible, with viability rates reaching 97%. We utilised “cyborg” cells built using bacteria and silver nanoparticles to deliver nanoparticles into C. elegans microworms. We believe that the technique described here will find numerous applications in cell surface engineering.