In this work, carbon dot-decorated graphite carbon nitride composites (CDs/g-C₃N₄) were synthesized and innovatively used as a SPME coating for the sensitive determination of chlorobenzenes (CBs) from water samples, coupled with gas chromatography–mass spectrometry. The CDs/g-C₃N₄ coating presented superior extraction performance in comparison to pristine g-C₃N₄, owing to the enhancement of active groups by CDs. The extraction capacities of as-prepared SPME coatings are higher than those of commercial coatings due to the functions of nitrogen-containing and oxygen-containing group binding, π–π stacking, and hydrophobic interactions. Under optimized conditions, the proposed method exhibits a wide linearity range (0.25–2500 ng L⁻¹), extremely low detection of limits (0.002–0.086 ng L⁻¹), and excellent precision, with relative standard deviations of 5.3–9.7% for a single fiber and 7.5–12.6% for five fibers. Finally, the proposed method was successfully applied for the analysis of CBs from real river water samples, with spiked recoveries ranging from 73.4 to 109.1%. This study developed a novel and efficient SPME coating material for extracting organic pollutants from environmental samples.

Periodontitis is a chronic oral inflammatory disease whose treatment is often hindered by poor drug retention, prolonged therapeutic regimens, and the rise of antibiotic resistance. In this study, we developed a Hydrogel@ZIF-8@metronidazole (Hydrogel@ZIF-8@MNZ) nanocomposite dressing for targeted, sustained, and in situ antimicrobial therapy. This system integrates ZIF-8, a pH-responsive metal–organic framework, with the antimicrobial agent metronidazole (MNZ), encapsulated within a crosslinked hydrogel matrix to enhance stability and retention in the oral environment. Drug release studies demonstrated that MNZ release was significantly accelerated under acidic conditions (pH 5.0), mimicking the periodontal microenvironment. The Hydrogel@ZIF-8 composite achieved a maximum MNZ adsorption capacity of 132.45 mg·g⁻¹, with a spontaneous and exothermic uptake process best described by a pseudo-second-order kinetic model, suggesting chemisorption as the dominant mechanism. The nanoplatform exhibited strong pH-responsive behavior, with enhanced drug release under acidic conditions and potent dose-dependent bactericidal activity against Fusobacterium nucleatum (Fn). At the highest tested concentration, bacterial survival was reduced to approximately 30%, with extensive membrane disruption observed through live/dead fluorescence microscopy. In summary, the stimuli-responsive Hydrogel@ZIF-8@MNZ nanocomposite offers an intelligent and effective therapeutic strategy for periodontitis. By tailoring its action to the disease microenvironment, this platform enables sustained and localized antibacterial therapy, addressing major challenges in the treatment of chronic oral infections.

Herein, novel, loose, and porous graphite phase carbon nitride/porous carbon (g-C₃N₄@PC) composites were prepared by decorating cellulose nanocrystals (CNCs). The characterization results demonstrate that the as-prepared composites presented high specific surface areas, porous structures, and abundant chemical groups, with the modification of CNCs. In view of the unique advantages, g-C₃N₄@PC was used as the coating material for the solid-phase microextraction (SPME) of organochlorine pesticides (OCPs) in water and juice samples. The g-C₃N₄@PC-coated fibers showed better extraction efficiencies than commercial fibers (100/7 μm PDMS and PA) toward the OCPs, with the enrichment factors of the g-C₃N₄@PC-coated fibers 5–30 times higher than the latter. Using a gas chromatography–mass spectrometry (GC-MS) instrument, the g-C₃N₄@PC-coated fibers exhibited a gratifying analytical performance for determining low concentrations of OCPs, with a wide linear range (0.1–1600 ng L⁻¹ for water; 0.1–1000 ng L⁻¹ for juice), low limits of detection (0.0141–0.0942 ng L⁻¹ for water; 0.0245–0.0777 ng L⁻¹ for juice), and good reproducibility and repeatability in optimal conditions. The established method showed good sensitivity and recovery in the determination of OCPs in the water and fruit juice samples, which displayed broad prospects for analyzing organic pollutants from environmental samples.

To remove the pollutant methylene blue (MB) from water, a sheet-like skeleton carbon derived from shaddock peels (SPACs) was prepared by NaOH activation followed by a calcination procedure under nitrogen protection in this study. Characterization results demonstrated that the as-prepared SPACs displayed a hierarchically porous structure assembled with a thin sheet-like carbon layer, and the surface area of SPAC-8 (activated by 8 g NaOH) was up to 782.2 m²/g. The as-prepared carbon material presented an ultra-fast and efficient adsorption capacity towards MB due to its macro-mesoporous structure, high surface area, and abundant functional groups. SPAC-8 showed ultrafast and efficient removal capacity for MB dye. Adsorption equilibrium was reached within 1 min with a removal efficiency of 99.6% at an initial concentration of 100 mg/g under batch adsorption model conditions. The maximum adsorption capacity for MB was up to 432.5 mg/g. A pseudo-second-order kinetic model and a Langmuir isotherm model described the adsorption process well, which suggested that adsorption rate depended on chemisorption and the adsorption process was controlled by a monolayer adsorption, respectively. Furthermore, column adsorption experiments showed that 96.58% of MB was removed after passing through a SPAC-8 packed column with a flow rate of 20 mL/min, initial concentration of 50 mg/L, and adsorbent dosage of 5 mg. The as-prepared adsorbent displays potential value in practical applications for dye removal due to its ultrafast and efficient adsorption capacity.

In this study, polyacrylic acid functionalized N-doped porous carbon derived from shaddock peels (PAA/N-SPCs) was fabricated and used as a solid-phase microextraction (SPME) coating for capturing and determining volatile halogenated hydrocarbons (VHCs) from water. Characterizations results demonstrated that the PAA/N-SPCs presented a highly meso/macro-porous hierarchical structure consisting of a carbon skeleton. The introduction of PAA promoted the formation of polar chemical groups on the carbon skeleton. Consequently, large specific surface area, highly hierarchical structures, and abundant chemical groups endowed the PAA/N-SPCs, which exhibited superior SPME capacities for VHCs in comparison to pristine N-SPCs and commercial SPME coatings. Under the optimum extraction conditions, the proposed analytical method presented wide linearity in the concentration range of 0.5–50 ng mL⁻¹, excellent reproducibility with relative standard deviations of 5.8%–7.2%, and low limits of detection varying from 0.0005 to 0.0086 ng mL⁻¹. Finally, the proposed method was applied to analyze VHCs from real water samples and observed satisfactory recoveries ranging from 75% to 116%. This study proposed a novel functionalized porous carbon skeleton as SPME coating for analyzing pollutants from environmental samples.