Particle flow numerical simulation was used to reproduce the transient unloading process of a deep-buried single fracture tunnel. The influence of fracture characteristics on the transient unloading effect was analyzed from the aspects of stress state, deformation characteristics, fracture propagation, and energy conversion. The results shows that the surrounding rock stress field of the deep-buried tunnel is divided into four areas: weak stress area I, strong stress area II, stress adjustment area III, and initial stress area IV. The fracture has an important impact on the stress adjustment process of transient unloading of the deep-buried tunnel, and the stress concentration area will be transferred from the bottom corner of the chamber and the vault to the fracture tip. With the increase in the fracture length, the distance from the stress concentration area at the fracture tip to the free surface gradually increases, and the damage area of the surrounding rock gradually migrates to the deep area of the rock mass. At this time, the release amount of strain energy gradually decreases and tends to be stable, while the dissipation energy shows a near ‘U’ shape change trend of decreasing first and then increasing. Under different fracture angles, the number of mesocracks is significantly different. Among them, the number of mesocracks in the 60° and 30° fractured surrounding rocks is greater followed by the 0° fractured surrounding rock, and the number of mesocracks in the 45° and 90° fractured surrounding rocks is relatively less. In addition, the proportion of compression-shear cracks shows a change trend of increasing first and then decreasing with the increase in the fracture angle, and it reaches the maximum value in the 45° fractured surrounding rock.

To investigate the mechanical properties and damage characteristics of granite under frequent disturbance loads in the process of underground engineering construction, laboratory uniaxial compression tests were conducted on granite under combined dynamic and static loading conditions. The following conclusions were reached: (1) under a dynamic disturbance, the failure stress of granite grows gradually as the initial stress and disturbance load rise due to the coupling of damage and strain-rate effect; (2) the characteristic stresses of granite specimens grow with the increasing amplitude of disturbance Δσ under the disturbing loads; with the same Δσ, the characteristic stresses show an increase trend with the increasing initial stress σ_m; (3) the particle size distribution of rock fragments broken under the disturbance load follows the fractal law, and the fractal dimension F gradually enlarges with the growth of Δσ, indicative of an increased degree of fragmentation; and (4) the damage variable grows rapidly at first, then steadily, and, finally, shows a rapid growth trend again under the disturbance loads. The Δσ significantly influences the number of cycles and rate of change of the damage variable during the steady increase. This research has certain theoretical significance and engineering guidance value for dynamic disaster recognition and control.

The tailings pond is a dangerous source of man-made debris flow with high potential energy. The oxidative acidification of tailings may cause the instability of the pond and induce serious safety accidents. The influence of oxidation and acidification degree on macro mechanical properties of tailings is discussed from the aspects of mineral composition and microstructure. The results show that as the degree of oxidation and acidification of tailings sand increases, the overall structural performance and load-bearing capacity decrease, and its cohesion (c) and internal friction angle (φ) show a decreasing trend. In fact, the engineering properties of tailings with different oxidation and acidification degrees are dominated by the physicochemical composition and structural characteristics. On the one hand, as the degree of oxidation increases, acidic substance will neutralize with CaCO₃ and CaMg(CO₃)₂, resulting in the loss of cemented substance and the decrease of cementation force between tailing sand particles as well as the gradual destruction of the integrity of tailing sand. On the other hand, the increase of oxidation and acidification degree of tailing sand leads to a gradual reduction of outline (2D) fractal dimension and gray surface (3D) fractal dimension of surface laminated structure as well as the obvious reduction of laminated structure and its roughness of tailings sand.

Circular steel pipe concrete can give full play to the combination of steel pipes and concrete, resulting in an improvement in the steel pipe’s concrete bearing capacity and ductility. In this study, the axial compression load capacities of nine steel pipe concrete columns, including one traditional steel pipe concrete column and eight steel pipe self-stressed concrete columns, were analyzed using an axial pressure test. The damage patterns and stress–strain curves of all the specimens under axial compression load were analyzed, and a comparison analysis was made between the test results of the different specimens. The test results show that the longitudinal expansion displacement of concrete increases with the increase in the expansion agent content. The greater the self-stress, the higher the bearing capacity of steel-tube concrete columns under axial compressive load within a certain range of the expansion agent, indicating that self-stress can increase the bearing capacity of steel-tube concrete columns under axial compressive load, but the effect of the magnitude of the self-stress on the damage pattern of the specimens is limited. The damage patterns of all the specimens were bulging in the center and concave at both ends. In addition, the existing theoretical calculation method of the bearing capacity of steel pipe concrete columns is modified, and a theoretical calculation method applicable to steel pipe self-stressed concrete columns is proposed to simplify the calculation method of the bearing capacity of steel pipe self-stressed concrete columns, which provides a basis for decision-making in practical engineering.