This study presents an innovative methodology for preform design in metal forging processes based on the convolution neural network (CNN) algorithm. The proposed approach extracts the features of inputted forging product geometries and utilizes them to derive the corresponding preform shapes by employing weight arrays (filters) determined during the convolutional operations. The filters are progressively updated during the training process, emulating the learning steps of a process engineer responsible for the design of preform shapes for the forging processes. The design system is composed of multiple three-dimensional (3D) CNN sub-models, which can automatically derive individual 3D preform design candidates. It also implies that the 3D surfaces of preforms are easily acquired, which is important for the forging industry. The proposed preform design methodology was validated by applying it to two-dimensional (2D) axisymmetric shapes, one-quarter plane-symmetric 3D shapes, and two other industrial cases. In all the considered cases, the design methodology achieved substantial reductions in the forging load without forging defects, proving its reliability and effectiveness for application in metal forging processes.

Sheets’ buckling instability, also known as oil canning, is an issue that characterizes the resistance to denting in thin metal panels. The oil canning phenomenon is characterized by a depression in the metal sheet, caused by a local buckling, which is a critical design issue for aesthetic parts, such as automotive outer panels. Predicting the buckling instability during the design stage is not straightforward since the shape of the component might change several times before the part is sent to production and can actually be tested. To overcome this issue, this research presents a robust prediction model based on the convolutional neural network (CNN) to estimate the buckling instability of automotive sheet metal panels, based on the major, minor, and Gaussian surface curvatures. The training dataset for the CNN model was generated by implementing finite element analysis (FEA) of the outer panels of various commercial vehicles, for a total of twenty panels, and by considering different indentation locations on each panel. From the implemented simulation models the load-stroke curves were exported and utilized to determine the presence, or absence, of buckling instability and to determine its magnitude. Moreover, from the computer aided design (CAD) files of the relevant panels, the three considered curvatures on the tested indentation points were acquired as well. All the positions considered in the FEA analyses were backed up by industrial experiments on the relevant panels in their assembled position, allowing to validate their reliability. The combined correlation of curvatures and load-displacement curves allowed correlating the geometrical features that create the conditions for buckling instability to arise and was utilized to train the CNN algorithm, defined considering 13 convolution layers and 5 pooling layers. The trained CNN model was applied to another automotive frame, not used in the training process, and the prediction results were compared with experimental indentation tests. The overall accuracy of the CNN model was calculated to be 90.1%, representing the reliability of the proposed algorithm of predicting the severity of the buckling instability for automotive sheet metal panels.

An intelligent optimization technology was proposed to mitigate prevalent multi-defects, particularly failure, wrinkling, and springback in sheet metal forming. This method combined deep neural networks (DNNs), genetic algorithms (GAs), and Monte Carlo simulation (MCS), collectively as DNN-GA-MCS. Our primary aim was to determine intricate process parameters while elucidating the intricate relationship between processing methodologies and material properties. To achieve this goal, variable blank holder force (VBHF) trajectories were implemented into five sub-stroke steps, facilitating adjustments to the blank holder force via numerical simulations with an oil pan model. The Forming Limit Diagram (FLD) predicted by machine learning algorithms based on the Generalized Incremental Stress State Dependent Damage (GISSMO) model provided a robust framework for evaluating sheet failure dynamics during the stamping process. Numerical results confirmed significant improvements in formed quality: compared with the average value of training sets, the improvements of 18.89%, 13.59%, and 14.26% are achieved in failure, wrinkling, and springback; in the purposed two-segmented mode VBHF case application, the average value of three defects is improved by 12.62%, and the total summation of VBHF is reduced by 14.07%. Statistical methodologies grounded in material flow analysis were applied, accompanied by the proposal of distinctive optimization strategies for the die structure aimed at enhancing material flow efficiency. In conclusion, our advanced methodology exhibits considerable potential to improve sheet metal forming processes, highlighting its significant effect on defect reduction.

In this study, the temperature and thermal stress fields of an internal combustion hot blast stove were calculated and analysed. Turbulent, species transport, chemical reaction, radiation, and porous media models were implemented in a computational fluid dynamics model. Thermal boundary conditions on the structure of the hot blast stove were calculated based on the analytic adiabatic Y-plus method. A method to interpolate the thermal boundary conditions to a finite element mesh was developed, and the boundary conditions were mapped through the proposed method. In the on-gas period, the vortex was generated in the dome, and it made the variation of the temperature field in the checker chamber. The maximum temperature of the flue gas reached 1841 K in the on-gas period. In the on-blast period, the flow was considerably even compared to the on-gas period, and the average blast temperature reached 1345 K. The outer region of the checker chamber is shown to be continuously exposed to a higher temperature, which makes the region the main domain in managing the deterioration of the refractory linings. The shell temperature did not change during the operation due to the lower thermal diffusivity of the refractory linings, where the inner surface of the refractory had a maximum temperature change from 1441 K to 1659 K. The maximum temperature of the shell was 418.4 K at the conical region of the checker chamber side. The conical region had the higher maximum and middle principal thermal stresses due to the presence of a large temperature gradient around the conical region, where the largest maximum and middle principal stresses were 300.6 MPa and 192.0 MPa, respectively. The conical region was found to be a significant area of interest where it had a higher temperature and thermal stress.

Background: With the growth of the Internet, social media platforms have emerged as major sources of medical information. We assessed the reliability, quality, and accuracy of the most-viewed YouTube videos containing information on the effect of vitamin C on the common cold.Methods: The YouTube videos were searched on August 1, 2022, using the keywords: (“ascorbic acid” OR “vitamin C” OR “Sodium Ascorbate” OR “L-ascorbic”) AND “common cold”. The 30 most-viewed videos were included in our study. The reliability and quality of the videos were analyzed using modified DISCERN and Global Quality Scales, respectively. When the videos included at least one correct or inaccurate scientific statement about the effect of vitamin C on the common cold, they were classified as accurate or misleading videos, respectively; those without any pertinent information were considered neither accurate nor misleading. If a video contained both accurate and inaccurate statements, it was classified as misleading.Results: Of the 30 most-viewed videos, 73% were unreliable, and 67% contained misleading information and were of a poor quality. Of these 30 videos, 14 videos were produced and posted by customers who were not specialized in medicine or nutrition. Moreover, these videos were of significantly lower reliability, quality, and accuracy than those produced by nutrition or fitness channels or by medical or nutrition professionals.Conclusion: The reliability, quality, and accuracy of videos uploaded by non-professionals were low. Therefore, video creators should upload reliable, high-quality videos to ensure the dissemination of accurate medical information.