Traditional CNC machine tool feed system models suffer from low simulation accuracy and limited generalizability. These issues arise from simplified process replication and rigid optimization methods based on mechanical knowledge. To address these challenges, this study proposes a new hybrid mechanism data-driven digital twin (DT) modeling framework. Firstly, a nonlinear coupling characterization method was developed by combining fuzzy proportional integral (PI) control with mechanical system dynamics. This method achieves real-time adaptive parameter updating of the feeding system, and compared with traditional models, the maximum error is reduced by 32.79%. To further address the inherent simplification characteristics of the mechanism model, a WOA-CNN-LSTM-Attention algorithm was independently constructed for compensation, and experimental verification through physical machine operation confirmed that the maximum error was reduced from 0.0576mm to 0.0121mm. Finally, an online recognition system with a recursive least squares multiplication with a forgetting factor was used to achieve fast parameter convergence: tracking for 0.005 seconds in simple cases and 0.01 seconds in complex cases, achieving real-time DT synchronization. This study provides a systematic solution for building stable and efficient DT systems in precision manufacturing applications.
1 November 2022 in Journal of Mechanical Science and Technology
A robotic drilling end-effector is designed and modeled, and a sliding mode variable structure control architecture based on the reaching law is proposed for its normal adjustment dynamic control. By using a third-order nonlinear integration chain differentiator for obtaining the unmeasurable speed and acceleration signals from the position signals, this sliding mode control scheme is developed with good dynamic quality. The new control law ensures global stability of the entire system and achieves both stabilization and tracking within a desired accuracy. A real-time control experiment platform is established in xPC target environment based on MATLAB Real-Time Workshop (RTW) to verify the proposed control scheme and simulation results. Simulations and experiments performed on the designed robotic end-effector illustrate and clarify that the proposed control scheme is effective.
27 September 2023 in Computational Particle Mechanics
Resin-mineral composites have a complex mesoscopic structure, the interfacial transition zone (ITZ) as its weak zone has a great influence on the damage performance of the material. Although the partial numerical simulation can reveal the influencing mechanism of the interfacial properties on the damage evolution at the mesoscopic scale, the accuracy of current digital model is low and the defined interval of the ITZ thickness is unknown, which makes it difficult to effectively describe the damage behavior of the material. To address the above problems, this paper establishes a four-media discrete element model which containing coarse aggregate, resin mortar, ITZ, and porous, investigating the variation of mechanical properties of the material, the distribution pattern of microcracks and the energy dissipation mechanism. The results show that the damaged process can be divided into four stages by considering the variation rate of microcrack increment as the criteria, which contain elastic compression, crack initiation, crack expansion, and post-peak damage, also the peak stress together with the elastic modulus of the material linearly increase with the increase of the interfacial strength, the crack initiation stress and damage stress have a well fitted relationship with the interfacial strength. Then, the energy evolution of the damage process is monitored, which indicates that the separation point of the strain energy and boundary energy curves in the pre-peak stage is influenced by the interfacial strength, and the growth rate of friction energy and damping energy rapidly increases in the post-peak stage. In conclusion, the evolutionary mechanism of the microcracks during loading is analyzed, it is observed that the internal microcracks initially emerge in the ITZ, furtherly connecting with the microcracks of the resin mortar to form the X-shaped fracture surface. The results reveal that the interfacial strength has a greater influence on the damage mechanism of the material, which can provide the reference for the precise design of some structural parts.