Background: Health effects of inhaling aerosol produced by electronic cigarettes (ECs) are still uncertain. This work analyzes ECs as specific inhalation devices, which can be characterized by aerodynamic resistance, size distribution of released droplets, and predicted regional and total lung deposition as a function of inhalation maneuver. Methods: The internal resistance of two types of EC and a conventional cigarette was evaluated by measuring ΔP-Q curves. Particle size distribution in EC-emitted mist was determined by laser diffraction. The measured data were used to calculate lung deposition based on two approaches: multipath particle dosimetry model (MPPD) and Finlay-Martin correlations. Computations were done for the set of ventilation parameters of an EC user, and also for a by-stander. Results: Tested ECs had higher aerodynamic resistance (1.6–1.9 mbar^0.5 min/L) than tobacco cigarette (0.56 mbar^0.5 min/L), and these values are much above the high-resistant DPIs. The average mass median diameter of droplets emitted from ECs was 410 nm, with the average GSD = 1.6. Predicted total lung deposition of the mainstream aerosol was 15%–45% depending on the breathing scheme. An expected increase of particle size in the exhaled aerosol led to predictions of 15%–30% deposition efficiency during passive vaping. Conclusions: ECs are characterized by high inhalatory resistance, so they require stronger physical effort to transfer cloud of droplets to the lungs, as compared, for example, to DPIs. A significant amount of aerosol is then exhaled, forming an unintentional source of particles to which by-standers are exposed. From this perspective, ECs are not optimal personal aerosol delivery devices.

The knowledge of possible acute and long-term health effects of aerosols inhaled from electronic cigarettes (ECs) is still limited partially due to incomplete awareness of physical phenomena related to EC-aerosol dynamics. This short review discusses the basic processes of aerosol transformation (dynamics) upon inhalation, indicating also the need for the accurate determination of the size of droplets in the inhaled EC-mist. The significance of differences in the aerosol particle size distribution for the prediction of regional deposition of inhaled mist in the respiratory system is highlighted as a decisive factor in the interactions of inhaled EC-aerosols with the organism.

The high rate of spreading of COVID-19 is attributed to airborne particles exhaled by infected but often asymptomatic individuals. In this review, the role of aerosols in SARS-CoV-2 coronavirus transmission is discussed from the biophysical perspective. The essential properties of the coronavirus virus transported inside aerosol droplets, their successive inhalation, and size-dependent deposition in the respiratory system are highlighted. The importance of face covers (respirators and masks) in the reduction of aerosol spreading is analyzed. Finally, the discussion of the physicochemical phenomena of the coronavirus entering the surface of lung liquids (bronchial mucus and pulmonary surfactant) is presented with a focus on a possible role of interfacial phenomena in pulmonary alveoli. Information given in this review should be important in understanding the essential biophysical conditions of COVID-19 infection via aerosol route as a prerequisite for effective strategies of respiratory tract protection, and possibly, indications for future treatments of the disease.