Sacrificial mandrels and micro-components made from pure aluminum have considerable application potential for fabricating terahertz micro-cavity components and for MEMS. Although WECMM has significant advantages in micro-shaping micro-components from difficult-to-machine materials, high-quality micro-shaping of pure aluminum has always been very challenging due to its extremely high chemical activity in an aqueous solution. This study analyzes the electrochemical characteristics of pure aluminum and the corresponding machining experiments by traditional WECMM in various electrolytes, and manufactures a high-quality micro-slit with a short machining path in the obtained ultra-low-concentration mixed electrolyte. However, in a continuous long-term WECMM with a long machining path, poor mass transport leads to the accumulation of bubbles around the machining area and the deposition of insoluble products on the wire surface that reduce the machining stability and machining accuracy. Therefore, a mass transport method of using intermittent ultrasonic oscillation is proposed. The principle was expounded, systematic comparative experiments demonstrated the effectiveness of this method in continuous long-time WECMM in improving the machining stability and machining accuracy. Finally, a rectangular mandrel of pure aluminum with a path length greater than 10,000 μ m was fabricated. After dissolving the rectangular mandrel, a terahertz hollow-core rectangular waveguide micro-cavity was produced.
Pure nickel microstructures have been widely used in MEMS and have great application potential as a sacrificial mandrel for fabricating terahertz micro-cavity components. The performance of MEMS and terahertz micro-cavity components can be significantly improved through the use of high-quality pure nickel microstructures. Up to now, microfabrication techniques, such as laser micromachining, wire electrical-discharge machining, and cold-spray additive manufacturing, have been used to machine various types of such microstructures. However, huge challenges are involved in using these micromachining techniques to fabricate pure-nickel microstructures with controllable size and good dimensional accuracy, surface roughness, and edge radius. In this paper, taking the example of a pure-nickel rectangular mandrel that corresponds to the size of the end face of a 1.7-THz rectangular waveguide cavity, the machining processes for the electrochemical deposition of pure-nickel microstructures with controllable size, high dimensional accuracy, and good surface roughness and edge radius are discussed systematically. This proposed method can be used to manufacture various types of high-quality pure-nickel microstructures.
The terahertz hollow-core metal rectangular waveguide cavity is a typical terahertz rectangular cavity structure that has several advantages and is widely used. However, the fabrication of the terahertz hollow-core metal rectangular waveguide cavity with high working frequency has not made recent breakthroughs, especially when the working frequency is 1-THz and above. In this paper, a combined process of electrochemical deposition and selective chemical dissolution is proposed first to manufacture the terahertz hollow-core metal rectangular waveguide cavity with high working frequency. Taking the fabrication of a 1.7-THz hollow-core metal rectangular waveguide as an example, the manufacturing methods and experiments of each step are described systematically. A terahertz hollow-core metal rectangular waveguide cavity with an end face size of 81.9 × 162.7 µm2, the edge radius less than 10 µm, the internal bottom surface roughness less than 0.08 µm, and the internal side surface roughness less than 0.3 µm is obtained. These experimental results are matched with the processing requirements of a 1.7-THz hollow-core metal rectangular waveguide. This flexible and controllable combined process makes it possible to manufacture more types of terahertz hollow-core metal rectangular cavity structures with high working frequency.
Terahertz metal rectangular cavity structures are widely used in terahertz devices due to their performance advantages, and various microfabrication techniques have been applied to the manufacturing of their high performance. In this paper, several typical application fields of terahertz technology and the reasons for its application in these fields are elaborated in detail. Several typical terahertz devices with terahertz metal rectangular cavity structures are introduced in detail. The research progress of various micromachining techniques for manufacturing terahertz rectangular cavity structures, such as DRIE, UV-LIGA, micro-milling, LTCC, 3D printing, and electrochemical micromachining, is discussed in detail. Finally, the advantages and disadvantages of various micromachining techniques for manufacturing terahertz micro-rectangular cavity structures are discussed, and the results show that electrochemical micromachining technology and micro-nano 3D printing technology are relatively promising methods for the manufacturing of high-frequency terahertz rectangular cavity structures.
With the increasing application of three-dimensional pure aluminum microstructures in micro-electromechanical systems (MEMS) and for fabricating terahertz components, high-quality micro-shaping of pure aluminum has gradually attracted attention. Recently, high-quality three-dimensional microstructures of pure aluminum with a short machining path have been obtained through wire electrochemical micromachining (WECMM), owing to its sub-micrometer-scale machining precision. However, machining accuracy and stability decrease owing to the adhesion of insoluble products on the surface of the wire electrode in long-duration WECMM, which limits the application of pure aluminum microstructures with a long machining path. In this study, the bipolar nanosecond pulses are used to improve the machining accuracy and stability in long-duration WECMM of pure aluminum. A negative voltage of −0.5 V was considered appropriate based on experimental results. Compared with the traditional WECMM using unipolar pulses, the machining accuracy of the machined micro-slit and the duration of stable machining were significantly improved in long-duration WECMM using bipolar nanosecond pulses.
With the development of fabrication technology for terahertz rectangular cavity devices, the fabrication process of integral terahertz waveguide cavities has received much attention because of its beneficial effect on improving the transmission of terahertz signals. However, smaller feature sizes, higher dimensional accuracy, and more stringent requirements for cavity surface roughness and edge radius make it difficult to manufacture terahertz waveguide cavities with a high operating frequency by using existing micro-manufacturing technology. At the same time, the smaller feature size also makes it more difficult to realize uniform metallization on the inner surface of a terahertz waveguide cavity. In this paper, a new and improved combined manufacturing process based on wire electrochemical micromachining and electrochemical deposition is proposed to realize the integral fabrication and uniform metallization of the inner surface of a high-frequency terahertz metal rectangular waveguide cavity. A detailed description and analysis of this combined process are carried out, together with corresponding experimental investigations. An integral 1.7 THz hollow-core metal rectangular waveguide cavity with an end-face size of 165.9 μm × 88.3 μm, an edge radius of less than 10 μm, an internal bottom surface roughness of less than 0.10 μm, and an internal side surface roughness of less than 0.40 μm was manufactured, and high-quality metallization of its inner surface was also achieved.