Photoassisted synthesis is as a highly appealing green procedure for controlled decoration of semiconductor catalysts with co-catalyst nanoparticles, which can be carried out without the concourse of elevated temperatures, external chemical reducing agents or applied bias potential and in a simple slurry reactor. The aim of this study is to evaluate the control that such a photoassisted method can exert on the properties of ruthenium nanoparticles supported on TiO2 by means of the variation of the incident irradiance and hence of the photodeposition rate. For that purpose, different Ru/TiO2 systems with the same metal load have been prepared under varying irradiance and characterized by means of elemental analysis, transmission electron microscopy and X-ray photoelectron spectroscopy. The photocatalytic activity of the so-obtained materials has been evaluated by using the degradation of formic acid in water under UV-A light. Particles with size around or below one nanometer were obtained, depending on the irradiance employed in the synthesis, with narrow size distribution and homogeneous dispersion over the titania support. The relation between neutral and positive oxidation states of ruthenium could also be controlled by the variation of the irradiance. The obtained photocatalytic activities for formic acid oxidation were in all cases higher than that of undecorated titania, with the sample obtained with the lowest irradiation giving rise to the highest oxidation rate. According to the catalysts characterization, photocatalytic activity is influenced by both Ru size and Ru0/Ruδ+ ratio.
Catalyseurs photothermiques à base de ruthénium supporté pour la déshydrogénation de l'acide formique et la methanation du CO2: Ce travail se concentre sur l'étude des matériaux à base de ruthénium pour une utilisation en catalyse photothermique. À cette fin, différentes expériences ont été réalisées, depuis leur méthode de synthèse jusqu'à leurs applications pour l'obtention d'hydrogène ou la conversion du CO2 via methanation. L'étude des différents matériaux, dans différentes conditions et sur différentes réactions montre que l'effet photothermique, principalement dû au ruthénium, peut contribuer à une amélioration des propriétés catalytiques. Les résultats montrent une orientation de la sélectivité vers les réactions souhaitées tout en augmentant l'activité catalytique à des températures plus basses grâce à l'irradiation lumineuse. Ce travail ouvre la voie à l'utilisation de catalyseurs photothermiques pour des processus plus durables dans le secteur énergétique et industriel.