For an open-deck steel plate girder railway bridge with rail joints, frequent damage to the bridge members and a high level of noise and vibration occur. By installing continuous welded rail (CWR) to the bridge, it is possible to reduce the noise and impact force of the bridge. However, current girder–sleeper fasteners have low lateral resistance in nature and track buckling can occur when CWR is used on such a bridge. Therefore, a new girder-sleeper fastener with proper lateral resistance to prevent CWR track buckling is needed. In this study, the lateral resistance requirements of a girder-sleeper fastener are investigated through a series of finite element (FE) analyses and parametric study. The effect of peak lateral resistance of the fastener, curve radius, girder length, and lateral displacement of girder are examined. From the analysis results, the peak lateral resistance criterion of the girder–sleeper fastener is proposed for the design of a new fastener for CWR tracks on an open-deck steel plate girder bridge.
30 June 2019 in Journal of the Korean Society of Hazard Mitigation
The design and application of eddy current brakes (ECBs) should be simple; further, ECBs should be used semi-permanently. This study aimed to determine major parameters for designing an ECB that can be applied to a small-scale wind turbine generator. To this end, an ECB was developed that could actuate without additional power, thus improving the efficiency of the generator. A series of simulations were conducted for a parametric study to pre-design ECBs suitable for small wind turbines. The six parameters chosen were disk thickness, number of magnets, radial location of magnets from center of disk, magnet pole arrangement, magnetic flux density, and rotational speed. The simulations were conducted on COMSOL Multiphysics. The results indicated that the number of magnets and magnet pole arrangements can significantly affect the performance curve of ECBs. Moreover, the disk thickness and rotational speed are linearly proportional to the braking torque.
With the rapid increase in automobiles, the importance of reducing low-frequency noise is being emphasized for a comfortable urban environment. Helmholtz resonators are widely used to attenuate low-frequency noise over a narrow range. In this study, a slit-type soundproof panel is designed to achieve low-frequency noise attenuation in the range of 500 Hz to 1000 Hz with the characteristics of a Helmholtz resonator and the ability to pass air through the slits on the panel surface for reducing wind load. The basic dimension of the soundproof panel is determined using the classical formula and numerical analysis using a commercial program, COMSOL Multiphysics, for transmission loss prediction. From the numerical study, it is identified that the transmission loss performance is improved compared to the basic design according to the shape change and configuration method of the Helmholtz resonator. Although the correlation according to the shape change and configuration method cannot be derived, it is confirmed that it can be used as an effective method for deriving a soundproof panel design that satisfies the basic performance.
30 June 2016 in Journal of the Korean Society for Advanced Composite Structures