Reducing fuel consumption and improving the economy by effectively reducing cruising drag is the main objective of the aerodynamic design of supersonic civil aircraft. In this paper, the aerodynamic optimization design system based on the Reynolds-Averaged Navier–Stokes (RANS) equation and discrete adjoint theory is applied to supersonic wing design. Based on this system, a single-point optimization design study of aerodynamic drag reduction in cruise conditions was carried out for two typical supersonic wing layouts, subsonic leading edge and supersonic leading edge, and the drag reduction reached 3.78% and 4.53%, respectively. The aerodynamic design characteristics of different types of supersonic wings were explored from the perspectives of wing load, twist angle distribution, pressure distribution, airfoil shape characteristics, and flow field characteristics. The optimization results show that the drag reduction of the subsonic leading edge configuration is dominated by the induced drag, while the optimizer mainly focuses on reducing the shock wave drag for the supersonic leading edge configuration. By comparing the sensitivity analysis of lift and drag coefficients to airfoil deformation with the optimization results, the optimized dominant directions of two types of supersonic wings are qualitatively analyzed. The derivatives obtained from discrete adjoint equations are useful to elaborate the design tendency and the reason for the trade-off generation of supersonic wings under specific layouts and engineering constraints, which provides a reference for the design of supersonic wings in the future.
Robust optimization design (ROD) is playing an increasingly significant role in aerodynamic shape optimization and aircraft design. However, an efficient ROD framework that couples uncertainty quantification (UQ) and a powerful optimization algorithm for three-dimensional configurations is lacking. In addition, it is very important to reveal the maintenance mechanism of aerodynamic robustness from the design viewpoint. This paper first combines gradient-based optimization using the discrete adjoint-based approach with the polynomial chaos expansion (PCE) method to establish the ROD framework. A flying-wing configuration is optimized using deterministic optimization and ROD methods, respectively. The uncertainty parameters are Mach and the angle of attack. The ROD framework with the mean as an objective achieves better robustness with a lower mean (6.7% reduction) and standard derivation (Std, 18.92% reduction) compared to deterministic results. Moreover, we only sacrifice a minor amount of the aerodynamic performance (an increment of 0.64 counts in the drag coefficient). In comparison, the ROD with Std as an objective obtains a very different result, achieving the lowest Std and largest mean The far-field drag decomposition method is applied to compute the statistical moment variation of drag components and reveal how the ROD framework adjusts the drag component to realize better aerodynamic robustness. The ROD with the mean as the objective decreases the statistical moment of each drag component to improve aerodynamic robustness. In contrast, the ROD with Std as an objective reduces Std significantly by maintaining the inverse correlation relationship between the induced drag and viscous drag with an uncertainty parameter, respectively. The established ROD framework can be applied to future engineering applications that consider uncertainties. The unveiled mechanism for maintaining aerodynamic robustness will help designers understand ROD results more deeply, enabling them to reasonably construct ROD optimization problems.
22 May 2023 in International Journal of Aerospace Engineering
The joined-wing configuration has great technical appeal for the development of next-generation SensorCraft. Research based on the simplified tandem airfoil system can improve understanding of the joined-wing configuration’s aerodynamic characteristics. We combine the adjoint-based aerodynamic shape optimization and self-organizing map- (SOM-) based data mining technology to reveal the flow interactions of tandem airfoils and aerodynamic characteristics from the perspective of the entire aerodynamic design space. The SOM is used to explore the correlation between relative position parameters and aerodynamic force coefficients of tandem airfoil systems. Results show that the drag coefficient at the defined range of lift coefficients has obviously positive linear correlation and greatly dependents on the value of decalage. The tandem airfoils with negative decalage around -2.7° have the smallest drag coefficients. Due to variations in the aerodynamic interaction strength, the drag coefficient of each airfoil changes from a linear law to a nonlinear law as airfoils approach each other. We then perform single-point aerodynamic shape optimization based on two sets of relative position parameters with different aerodynamic interaction strengths, and 1.8% and 1.28% drag reductions are obtained, respectively. Based on optimized airfoils, the SOM is used to reveal the distribution of drag variation in the design space constructed by relative position parameters. Results illustrate that the aerodynamic interference strength between the front and rear airfoils significantly affects the drag reduction mechanism, which results in the different distribution patterns of drag variation in design space.
8 May 2023 in International Journal of Aerospace Engineering
Maintaining the laminar flow on surfaces through active control is a significantly promising technique for reducing fuel burn and alleviating environmental concerns in commercial aviation. However, there is a lack of systematic parameter studies for the hybrid laminar flow control (HLFC) together with natural laminar flow (NLF). To address this need, we optimize the infinite swept wings with different sweep angles and at various conditions, including different Mach numbers, Reynolds numbers, and lift coefficients. The Reynolds-averaged Navier-Stokes (RANS) solver coupled with the linear stability theory is applied for the laminar-turbulent transition prediction, and the traditional optimization method based on evolutionary algorithms is applied for laminar flow wing optimization. The optimization results found that HLFC is required when the NLF fails at a larger sweep angle (35°) and Reynolds number ( ). The lower pressure peak with boundary-layer suction is found to delay the transition of the regional aviation condition. Besides, the pressure distribution of HLFC is similar to NLF results at the lower Reynolds number ( ) or sweep angle (25°), i.e., a gentle negative pressure gradient near the leading edge and a small favorable pressure gradient behind it. Clarifying the characteristics of laminar flow wings will advance the application of the laminar flow technique within its field.
Based on the adjoint method, the afterbody of a military transport aircraft was optimized and designed to meet engineering constraints under real flight conditions. Guidance for the key design parameters of the afterbody of the military transport aircraft is given. The vortex dynamics and boundary layer extraction methods were used to analyze the optimization results of military transport aircraft. It was found that, upstream of the vortex shedding point, the circumferential accumulation process of the vorticity is weakened. The position of the vortex shedding and the appearance of the saddle line are delayed by reducing the circumferential inverse pressure gradient and the intensity of the crossflow. The afterbody vortex system of the optimized configuration is further away from the surface. Meanwhile, the distance between the counter-rotated vortex decreases, and the upwashing speed of the vortex core is smaller. Therefore, vortex-induced drag is reduced. Finally, compared with the initial configuration, the optimized configuration has a relative drag reduction of 23.2%.