This study investigates the adverse effects of styrofoam waste on the environment due to its non-biodegradable nature and persistence in natural ecosystems, encompassing issues such as visual pollution, habitat disruption, and potential health risks to flora and fauna. The research also delves into the feasibility of repurposing styrofoam waste as a lightweight fill material in embankment construction, aiming to improve the performance of such structures, with the primary objective of augmenting the structural performance of such constructions. The paper conducts an extensive assessment of the technical properties and engineering characteristics of a soil-styrofoam mixture. Key parameters under scrutiny encompass density, shear strength, and bearing capacity behaviors. Various proportions of styrofoam, specifically 0.0%, 0.2%, 0.4%, 0.6%, and 0.8% by weight, were systematically incorporated into the soil mixture. Based on this study, the use of styrofoam can reduce the maximum dry density of the soil mixture, but still has the desired bearing capacity. These results indicate that the reuse of Styrofoam waste as an additional material in embankment construction has great potential to improve the performance and sustainability of embankment projects.
2 March 2023 in Periodica Polytechnica Civil Engineering
This research aims to utilize glycerin pitch waste as an alternative asphalt binder (extender) in Stone Mastic Asphalt (SMA) mixture. Glycerin pitch (GP) is a by-product from crude glycerol refining process from the palm oil oleochemical industry. The research method was carried out by testing the chemical and physical characteristics of GP by comparing it to pen 60/70, then testing based on asphalt binder rheology and asphalt concrete characteristics. ANOVA statistical test and Tukey-Kramer statistical grouping test were used to know the significant use of GP in SMA mixture. The variations of GP content tested to pen 60/70 were 0%, 15% and 25% by weight, then used as a binder for the SMA mixture which was tested under asphalt content (Pb) conditions based on Marshall characteristic, immersion index and drain down. The test results show that GP has the potential as an asphalt extender, with a maximum content of 22% by weight of asphalt binder or with a ratio of 1 GP: 4 pen 60/70. The characteristics of the SMA mixture using pen 60/70 and GP as asphalt binder extender, under conditions of Pb = 7% produce SMA mixture that meets the specification. Statistically, in stability characteristics of SMA, GP has a significant effect on SMA + 22% GP mixture. In the immersion index, the use of GP has a significant effect on all type of mixture, while in the draindown characteristics has significant effect on the SMA+0% GP mixture.
1 January 2020 in IOP Conference Series: Materials Science and Engineering
At the end of 2016, significant displacement occurred at P2 pier of Cisomang Bridge at Purwakarta-Bandung-Cileunyi toll road KM 100+700, West Java. The shift of pier is caused by the movement of soil under the substructure that has been indicated since 2012. P2 pier is constructed over clay shale. Clay shale has characteristics when in dry condition, the soil has high shear strength, but when the soil absorbs water or expose in open air, the soil loses its strength. P2 pier displacement results in extreme structural damage, so immediate handling is needed to stop the shifting of the pier. Analysis and reinforcement study are carried out using finite element method. Based on analysis, it is discovered that the existing slope stability safety factor of P2 pier is 1.09, indicating that the soil movement can occur if the clay shale is disrupted. Reinforcement is designed to mitigate the shift of the P2 pier by adding 38 pile foundations to the existing foundation configuration. Each pile has diameter of 1.2 meter with a depth of ±30 meter across the existing slip circle. Reinforcement increases the slope stability safety factor to 1.25, indicating that the P2 pier after reinforcing is in safe condition.
20 August 2025 in International Journal of Pavement Research and Technology
This research investigates the innovative application of 3D printing technology in the production of geomembranes for laboratory-scale geotechnical experiments. Commonly, geotechnical research relies on the results of model testing. However, due to the high costs and complexity involved, full-scale model testing is rarely carried out. Geomembranes are essential components in various civil engineering projects, particularly in environmental containment and hydraulic barrier systems. In this research, the potential of 3D printing as an innovative method for producing geomembranes is carried out. Using a 3D printer, this research aims to prepare geosynthetic models with accurate geometric scales and tensile properties suitable for laboratory testing. A comparison was made between HDPE geomembranes and 3D printed geomembranes, to highlight their performance in a geotechnical laboratory environment. The research results show that 3D printed geomembranes show potential for applications in geotechnical research.