A functional separator is designed to improve the utilization of sulfur and to inhibit polysulfide shuttling for high performance lithium–sulfur (Li–S) batteries. Here, we demonstrate a functional separator which is obtained by coating sulfonated UiO-66 metal–organic framework (MOF)/Nafion on a polyethylene separator. This modified separator suppresses the polysulfide diffusion due to a molecular sieving and electrostatic repulsion effect and facilitates the redox kinetics of sulfur conversion because of a fast charge transport by sulfonic groups tethered to the MOF and Nafion. Thus, the Li–S cells based on the MOF/Nafion hybrid-coated separator achieve a discharge capacity of 1127.4 mA h g−1 at 0.1C, a capacity retention of 66.8% at 3C relative to 0.1C, and a cycling stability of 75.5% over 200 charging/discharging cycles. These values are much greater than those of pristine and Nafion-coated separators, which confirms the superiority of MOF/Nafion hybrid coating layers for the design of functional separators.
21 November 2019 in Journal of the American Chemical Society
Deuterium has been recognized as an irreplaceable element in industrial and scientific research. However, hydrogen isotope separation still remains a huge challenge due to the identical physicochemical properties of the isotopes. In this paper, a partially fluorinated metal-organic framework (MOF) with copper, so-called FMOFCu, was investigated to determine the separation efficiency and capacity of the framework for deuterium extraction from hydrogen isotope mixture. The unique structure of this porous material consists of a tri-modal pore system with large tubular cavities connected through a smaller cavity with bottleneck apertures with the size of 3.6 Å plus a third hidden cavity connect-ed by an even smaller aperture of 2.5 Å. Depending on temperature these two apertures show a gate opening effect and the cavities get successively accessible for hydrogen with increasing temperature. The thermal desorption spectroscopy (TDS) measurements indicate that the locally flexible MOF can separate D2 from isotope mixture efficiently, with a selectivity of 14 at 25 K and 4 at 77 K.
Porous metal-organic-frameworks (MOFs) are attractive materials for gas storage, separations, and catalytic reactions. A challenge exists, however, on how to introduce larger pores juxtaposed with the inherent micropores in different forms of MOFs, which would enable new functions and applications. Here we report the formation of heterogeneous pores within MOF particles, patterns, and membranes, using a discriminate etching chemistry, called silver-catalyzed decarboxylation. The heterogeneous pores are formed, even in highly stable MOFs, without altering the original structure. A decarboxylated MOF membrane is shown to have pH-responsive switchable selectivity for the flow-assisted separation of similarly sized proteins. We envision that our method will allow the use of heterogeneous pores for massive transfer and separation of complex and large molecules, and that the capability for patterning and positioning heterogeneous MOF films on diverse substrates bodes well for various energy and electronic device applications.