In this study, the microstructure of mock-up mortar specimens for a historic environment, composed of different mixtures, was studied using mercury intrusion porosity (MIP) and microcomputed tomography (µCT), highlighting the advantages and drawbacks of both techniques. Porosity, sphericity, and pores size distribution were studied, evaluating changes according to mortar composition (aerial and hydraulic binders, quartz sand, and crushed limestone aggregate). The µCT results were rendered using 3D visualization software, which provides complementary information for the interpretation of the data obtained using 3D data-analysis software. Moreover, µCT contributes to the interpretation of MIP results of mortars. On the other hand, MIP showed significant ink-bottle effects in lime and cement mortars samples that should be taken into account when interpreting the results. Moreover, the MIP results highlighted how gypsum mortar samples display a porosity distribution that is best studied using this technique. This multi-analytical approach provides important insights into the interpretation of the porosimetric data obtained. This is crucial in the characterization of mortars and provides key information for the study of building materials and cultural heritage conservation.
18 June 2019 in The European Physical Journal Plus
This paper presents the study of four gypsum mixtures, focusing on the role of both inorganic and organic additives and on the micro-structural features and mechanical properties. Additives have been chosen among those most reported in historical recipes, for example magnesia, lime putty, rabbit glue. The selected mixes refer to gypsum-based materials used in artworks manufacture, such as plasters, mouldings, stuccoworks, pastiglia. Blank reference materials were prepared on purpose according to the specific recipe, in order to verify the final composition and to highlight the hardening mechanisms and the formation of setting compounds. The chemical composition was related to workability properties and final mechanical resistance and the action of additives as retardants was studied with interesting results. For instance, MgO imparts good properties to the mechanical features, especially with regard to the compressive strength characteristics.
This study examines charred bread-like samples found in several archaeological sites across northern Italy and dating from the Early Bronze Age to the Early Middle Ages, some of which are included amongst the UNESCO World Heritage Sites. The aim is to investigate differences and homogeneities in bread production processes in different eras and cultures. Bread was a staple food in many ancient societies, but has rarely been found amongst the materials that survive in archaeological sites. When it is found, it is usually because the bread was charred by accidental combustion (falling into the oven during baking) or deliberate combustion (for ritual purposes). The literature on the issue is not abundant, but has been growing over the past decade. There is, therefore, room to propose new study methodologies at this time. We studied eight samples of charred bread-like products and we used optical and scanning electron microscopy to identify plant tissue remains attributable to cereal caryopses, partly modified by bread-making processes. Energy dispersive X-ray spectroscopy and, for the first time, infrared spectroscopy in attenuated total reflectance mode (FTIR-ATR) were also used to investigate the composition and preparation methods of the different types of bread-like products. In particular, FTIR-ATR analysis can give indications about the presence of starch, gluten and lignin in the sample under investigation and it can, therefore, be used as a screening to guide subsequent SEM analysis in the search for specific cereal residues in the dough. In some cases, the different techniques used also revealed the presence of minerals such as silicates and carbonates, probably due to grinding residues or poor sample cleaning. During SEM observations, phytoliths, diatoms and framboids were also found in some of the samples.