The recent surge in environmental awareness and consumer demand for stable, healthy, and safe foods has led the packaging and food sectors to focus on developing edible packaging materials to reduce waste. Edible films and coatings as a modern sustainable packaging solution offer significant potential to serve as a functional barrier between the food and environment ensuring food safety and quality. Whey protein is one of the most promising edible biopolymers in the food packaging industry that has recently gained much attention for its abundant nature, safety, and biodegradability and as an ecofriendly alternative of synthetic polymers. Whey protein isolate and whey protein concentrate are the two major forms of whey protein involved in the formation of edible films and coatings. An edible whey film is a dry, highly interacting polymer network with a three-dimensional gel-type structure. Films/coatings made from whey proteins are colorless, odorless, flexible, and transparent with outstanding mechanical and barrier properties compared with polysaccharide and other-protein polymers. They have high water vapor permeability, low tensile strength, and excellent oxygen permeability compared with other protein films. Whey protein-based films/coatings have been successfully demonstrated in certain foods as vehicles of active ingredients (antimicrobials, antioxidants, probiotics, etc.), without considerably altering the desired properties of packaging films that adds value for subsequent industrial applications. This review provides an overview of the recent advances on the formation and processing technologies of whey protein-based edible films/coatings, the incorporation of additives/active ingredients for improvement, their technological properties, and potential applications in food packaging.

In 2018, the worldwide consumption of meat was 346.14 million tonnes, and this is expected to increase in the future. As meat consumption increases, the use of packaging materials is expected to increase along with it. Petrochemical packaging materials which are widely used in the meat processing industry, take a long time to regenerate and biodegrade, thus they adversely affect the environment. Therefore, the necessity for the development of eco-friendly packaging materials for meat processing, which are easily degradable and recyclable, came to the fore. The objective of this review is to describe the application of natural compound-derived edible films with their antioxidant and antibacterial activities in meat and meat products. For several decades, polysaccharides (cellulose, starch, pectin, gum, alginate, carrageenan and chitosan), proteins (milk, collagen and isolated soy protein) and lipids (essential oil, waxes, emulsifiers, plasticizers and resins) were studied as basic materials for edible films to reduce plastic packaging. There are still high consumer demands for eco-friendly alternatives to petrochemical-based plastic packaging, and edible films can be used in a variety of ways in meat processing. More efforts to enhance the physiological and functional properties of edible films are needed for commercial application to meat and meat products.

Cholesterol is an important biological compound; however, its oxidation products have been proven to be harmful to human health. Cooking, storage, and reheating methods significantly affect the safety of meat products, as they contribute to the production of cholesterol oxidation products (COPs). Three cooking methods were used to cook sausages, loin ham, bacon, luncheon meat, and pressed ham, in order to investigate the effect of cooking, storage, and reheating on total cholesterol and on the formation of COPs. Cooked samples were stored at 4 °C and reheated after 3 and 6 storage days by the same cooking method or by microwaving. The samples were assessed for total lipids, cholesterol, and cholesterol oxides. The average cholesterol content in the processed meat varied from 76.0 mg/100 g to 201.70 mg/100 g. Microwaved ham showed the lowest cholesterol content compared to that of other processed meat products. Significant differences were found in cholesterol content and cholesterol oxidation products depending on cooking, storage, and reheating methods. Six cholesterol oxides were found in processed meat, of which 7β-hydroxycholesterol and α-epoxides were detected as the major oxidation products. Microwaving and oven grilling resulted in higher production of COPs in processed meat as compared with other cooking methods. Refrigerated storage tended to significantly increase the COPs content.

Objective: Pork belly is considered as the most commercially important and preferable primal cut by consumers worldwide. Thus, this study was conducted to determine the effects of fat levels on the meat quality characteristics of pork bellies.Methods: Seventy-eight growing-finishing pigs collected from different commercial pig farms were slaughtered and used in the present study. After slaughter 24 h, bellies were fabricated according to the Korean Pork Cutting Specification, and immediately sampled for analysis of their fat content. Based on the fat levels, the bellies were segregated into three different groups: low fat (LF, fat ≤20%, n = 15), medium fat (MF, fat 21% to 30%, n = 30), and high fat (HF, fat ≥31%, n = 33). The bellies were then analyzed for meat quality traits, fatty acids, flavor compounds and eating quality properties.Results: The HF group had lower moisture and cooking loss levels compared to the other groups (p<0.05). The LF group presented higher proportions of polyunsaturated fatty acids compared to the other groups (p<0.05). The LF group showed higher amounts of the Maillard reaction-derived flavor compounds (e.g., 2,5-dimethyl pyrazine, 2-ethyl-3,5-dimethyl, and 4-methylthiazole) associated with meaty and roasty flavors whereas, the HF group showed higher amounts of oleic acid- derived compounds (e.g., nonanal and octanal) associated with the fatty and oily flavors. Interestingly, significantly higher scores for all the eating quality attributes (flavor, juiciness, tenderness, and overall acceptance) were found in the HF group compared to those in the LF or MF group (p<0.05).Conclusion: The high-fat bellies (fat ≥31%) had a better technological quality and eating quality compared to the low-fat bellies (fat ≤20%). Thus, increasing the fat content may improve the technological quality and eating quality traits of pork bellies, however, this increase may also result in more trimmed loss due to excessively deposited body fat.

To evaluate the safety and risk assessment of cheese consumption in the Republic of Korea, sixty cheese samples purchased from the farmstead and retails markets (imported) were analyzed for their biogenic amine (BA) contents. The BA profiles and quantities of eight amines (tryptamine, 2-phenylethylamine, putrescine, cadaverine, histamine, tyramine, spermidine, and spermine) were determined using high-performance liquid chromatography (HPLC). Spermine was the only amine detectable in all the samples. The BAs of fresh cheeses from both farmstead and retail markets were mostly undetectable, and comparatively at lower levels (1000 mg/kg, of which histamine accounts nearly 86 and 77% of the total levels, respectively. The tolerable limits of the potential toxic amines, histamine and tyramine surpassed in four and three imported ripened samples, respectively. Furthermore, the presence of potentiators (putrescine and cadaverine) together in samples even with a lower level of toxic amines alarms the risk in consumption. Therefore, adoption of strict hygienic practices during the entire chain of cheese production, along with obligatory monitoring and regulation of BA in cheeses seems to be mandatory to ensure the safety of the consumers.

The present work aimed at evaluating the effects of carcass quality grade on the quality characteristics of pork meat according to Korean carcass quality grade system. Pork carcasses with varying in quality grades (QG): 1+ (QG1+, n=10), 1 (QG1, n=10) and 2 (QG2, n=10), were used to evaluate the relationship between carcass quality grade and meat quality. The meat quality traits, fatty acid profiles, flavor compounds and sensory qualities were measured on the longissimus dorsi muscle samples of these carcasses. Pork meat of higher quality grade (GQ1+) presented significantly higher fat content (5.43%), C18:2n-6 level (19.03%) and total unsaturated fatty acids (UFA) content (62.72%). Also, the QG1+ meat was significantly higher in levels of classes of flavor compounds such as aldehydes, alcohols and hydrocarbons in comparison to those of the meat samples from the lower GQ groups. The sensory evaluation results (flavor, juiciness, tenderness and acceptability scores) of QG1+ meat was significantly higher than the QG1 and QG2 meats. The pork with lower QG (i.e., QG2) was found positively correlated to redness (r=0.987), C18:1n-9 level (r=1.000) but negatively correlated to the fat content (r=-0.949), and flavor (r=-0.870), juiciness (r=-0.861), tenderness (r=-0.862) and acceptability (r=-0.815) scores. The pork with higher quality grade had higher fat content, total unsaturated fatty acids and better eating quality, thus producing pork with higher quality grades should be considered in order to satisfy the consumer's expectation.