Micro gas turbine engines are a popular subject in research activities. Most of them consider performance measurements, and vibration analysis that are related to operating running engines. Operating even small-size engines causes potential risk to operator health. The research problem was to identify the acoustic flow field from the front and back of the operating GTM-120 engine. The research was divided into three parts: identify noise at various rotational speeds, identify an acoustic field of the engine, and identify noise level at additional points. Obtained results identify that noise from such a small engine at the range of 67 to 109 dbC is harmful and unpleasant to people who are within a radius of 15 meters from the engine. The final conclusion is that installing mufflers for any size of turbomachinery should be mandatory.
The presented article outlines the changes that have occurred over the past quarter-century in the design and performance of micro class gas turbine engines. The primary goal is to determine the current stage of development in engine construction. To achieve this, a representative group of 83 micro-class engines was selected and categorized based on the date they were introduced into operation. The main performance criterion was the engine's thrust, as these types of engines are primarily used in short-lifespan unmanned aerial vehicles (UAVs). A rotational performance characteristic was identified for a family of engines grouped into three geometric series. These characteristics are presented in relative parameters, facilitating convenient implementation in UAV design. A new trend in fanjet engine construction was identified, where thrust generation is primarily driven by the mass flow of the working medium passing through the engine duct. This is observed in modern engines with thrust exceeding 20 daN. It was demonstrated that, while maintaining the same external dimensions, a contemporary engine can deliver three times the thrust of a similar engine designed at the beginning of the 21st century.
The PZL – 10-turboshaft gas turbine engine is straight derivative of GTD-10 turboshaft design by OKMB (Omsk Engine Design Bureau). Prototype engine first run take place in 1968. Selected engine is interested platform to modify due gas generator layout 6A+R-2, which is modern. For example axial compressor design from successful Klimov designs TB2-117 (10A-2-2) or TB3-117 (12A-2-2) become obsolete in favour to TB7-117B (5A+R-2-2). In comparison to competitive engines: Klimov TB3-117 (1974 – Mi-14/17/24), General Electric T-700 (1970 – UH60/AH64), Turbomeca Makila (1976 – II225M) the PZL-10 engine design is limited by asymmetric power turbine design layout. This layout is common to early turboshaft design such as Soloview D-25V (Mil-6 power plant). Presented article review base engine configuration (6A+R+2+1). Proposed modifications are divided into different variants in terms of design complexity. Simplest variant is limited to increase turbine inlet temperature (TIT) by safe margin. Advanced configuration replace engine layout to 5A+R+2-2 and increase engine compressor pressure ratio to 9.4:1. Upgraded configuration after modification offers increase of generated power by 28% and SFC reduction by 9% – validated by gas turbine performance model. Design proposal corresponds to a major trend of increasing available power for helicopter engines – Mi-8T to Mi-8MT – 46%, H225M – Makila 1A to 1A2 — 9%), Makila 1A2 to Makila 2-25%.