The contrast in the emissivity spectra of phosphorite and associated carbonate rock can be used as a guide to delineate phosphorite within dolomite. The thermal emissivity spectrum of phosphorite is characterized by a strong doublet emissivity feature with their absorption minima at 9 µm and 9.5 µm; whereas, host rock dolomite has relatively subdued emissivity minima at ~9 µm. Using the contrast in the emissivity spectra of phosphorite and dolomite, data obtained by the thermal bands of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor were processed to delineate phosphorite within dolomite. A decorrelation stretched ASTER radiance composite could not enhance phosphorite rich zones within the dolomite host rock. However, a decorrelation stretched image composite of selected emissivity bands derived using the emissivity normalization method was suitable to enhance large surface exposures of phosphorite. We have found that the depth of the emissivity minima of phosphorite gradually has increased from dolomite to high-grade phosphorite, while low-grade phosphate has an intermediate emissivity value and the emissivity feature can be studied using three thermal bands of ASTER. In this context, we also propose a relative band depth (RBD) image using selected emissivity bands (bands 11, 12, and 13) to delineate phosphorite from the host rock. We also propose that the RBD image can be used as a proxy to estimate the relative grades of phosphorites, provided the surface exposures of phosphorite are large enough to subdue the role of intrapixel spectral mixing, which can also influence the depth of the diagnostic feature along with the grade. We have validated the phosphorite pixels of the RBD image in the field by carrying out colorimetric analysis to confirm the presence of phosphorite. The result of the study indicates the utility of the proposed relative band depth image derived using ASTER TIR bands for delineating Proterozoic carbonate-hosted phosphorite.
1 February 2020 in Journal of the Geological Society of India
Airborne Visible InfraRed Imaging Spectrometer – Next Generation (AVIRIS-NG) data with high spectral and spatial resolutions are used for mapping metasediments in parts of Banswara district, Rajasthan, India. The AVIRIS–NG image spectra of major metasedimentary rocks were compared with their respective laboratory spectra to identify few diagnostic spectral features or absorption features of the rocks. These spectral features were translated from laboratory to image and consistently present in the image spectra of these rocks across the area. After ensuring the persistency of absorption features from sample to image pixels, three AVIRIS – NG based spectral indices is proposed to delineate calcareous (dolomite), siliceous (quartzite) and argillaceous (phyllite) metasedimentary rocks. The index image composite was compared with the reference lithological map of Geological Survey of India and also was validated in the field. The study demonstrates the efficiency of AVIRIS – NG data for mapping metasedimentary units from the Aravalli Supergroup that are known to host strata bound mineral deposits.
1 December 2019 in Journal of the Geological Society of India
In the present study, broad band emissivity, apparent thermal inertia and albedo image products have been derived based on processing of Advanced Spaceborne Thermal Emission and reflection (ASTER) data and analyzed their potential for delineating different metasedimentary units of Aravalli Group in Rajasthan. The major focus of the work is to analyze the potential of emissivity bands with respect to conjugated image product of emissivity, albedo and inertia for discriminating different rock types. In this regard, it was observed that combined use of emissivity, thermal inertia and albedo was effective for delineating different rock types as the combined variation of thermo-physical and mineralogical properties were recorded in these parameters. On the other hand, broad band emissivity spectra of rocks of the study area had subtle contrast, which was not optimum for the discrimination of different rock types. This was evident in the ASTER derived emissivity composite in which spatial delineation of rocks of the study area was not possible. Therefore, it is concluded that the combined use of albedo, thermal inertia and emissivity was suitable to delineate different metasedimentary rocks. This was also evident from the three dimensional data plot of selected emissivity band, inertia and albedo which separated different rocks from one another.
Gadag schist belt, India is known for sulphide-gold mineralization. In the study area mineralization is controlled structurally and lithologically. In this context, Airborne Visible-Infrared Imaging Spectrometer - Next Generation (AVIRIS-NG) Visible Near InfraRed (VNIR) - Shortwave Infrared (SWIR) bands were utilized to derive alteration zones and structures present in the study area. Lithological boundaries have also been updated using AVIRIS-NG VNIR-SWIR bands derived images enhancement products i.e. Minimum Noise Fraction (MNF) and False Colour Composite (FCC). Further, image spectra of alteration zones (Hydrous mineral etc.) derived from AVIRIS-NG calibrated VNIR-SWIR bands were compared with the standard corresponding reference library spectra (USGS, JPL spectral library). These image spectra have been utilized to demarcate the alteration zones using the Matched Filtering spectral mapping method. Structures were demarcated using high pass (HP) filtered image and FCC images. Low pass (LP) filter image and along with MNF & FCC image composite were utilized to update the lithological boundaries in the study area.Ground gravity data has also been processed to derive the subsurface evidences relevant to the deposit in the present study area. Subsurface structures which are responsible for the transportation of mineral rich fluid in the near subsurface are delineated using the gravity data derived products. Apart from this, basement depths are also derived from the gravity data which are being utilized for the validation as well as to further precise the locations of mineral deposits. These subsurface structures (gravity data), lithology, lineament density and alteration zones are very important evidential layers which have been integrated using fuzzy logic integration techniques to identify potential zones of gold-sulphide mineralization in the present study area. The prospective zones are validated using the secondary data and basement depth derived from the gravity data.For similar kind of gold-sulphide mineralization, AVIRIS-NG data and Gravity data can be used to derive the important evidential layers in any part of the world. There are only few studies where such integration approach has been utilized to explore new potential zones of gold sulphide mineralization. Keywords: AVIRIS-NG, VNIR-SWIR, alteration, MNF, FCC, Gravity, Basement Depth