Micro-perforated plates (MPPs) are acoustically important elements in micro-electro-mechanical systems (MEMS). In this work an analytical solution for perforated plates is combined with finite element method (FEM) to develop formulas for the reactive and resistive end effects of the perforations on the plate. The reactive end effect is found to depend on the hole radius and porosity. The resistive end effect is found to depend on hole radius only. FEM is also used to develop an understanding of the loss mechanism that corresponds to the resistive end effects. The developed models can be used in optimization studies of the MEMS and MPPs.
Seismic diffractions carry the signature of near-surface high-contrast anomalies and need to be extracted from the data to complement the reflection processing and other geophysical techniques. Because diffractions are often masked by reflections, surface waves, and noise, careful diffraction separation is required as a first step for diffraction imaging. A multiparameter time-imaging method is used to separate near-surface diffractions. The implemented scheme makes use of the wavefront attributes that are reliable fully data-derived processing parameters. To mitigate the effect of strong noise and wavefield interference in near-surface data, our workflow incorporates two wavefront-based parameters, dip angle and coherence, as additional constraints. The output of the diffraction separation is a time trace-based stacked section that provides the basis for further analysis and applications such as time migration. To evaluate the performance of the proposed wavefront-based workflow, it is applied to two challenging field data sets that were collected over small culverts in very near-surface soft soil environments. The results of the proposed constrained workflow and the existing unconstrained approach are presented and compared. The proposed workflow demonstrates superiority over the existing method by attenuating more reflection and noise, leading to improved diffraction separation. The abundance of unmasked diffractions reveals that the very near surface is highly scattering. Time migration is carried out to enhance anomaly detection by focusing the isolated diffractions. Although strong diffractivity is observed at the approximate location of the targets, there are other diffracting zones observed in the final sections that might bring uncertainties for interpretation.
Geotechnical investigation plays an indispensable role in site characterization and provides necessary data for various construction projects. However, geotechnical measurements are time-consuming, point-based, and invasive. Non-destructive geophysical measurements (seismic wave velocity) can complement geotechnical measurements to save project money and time. However, correlations between geotechnical and seismic wave velocity are crucial in order to maximize the benefit of geophysical information. In this work, artificial neural networks (ANNs) models are developed to forecast geotechnical parameters from seismic wave velocity. Specifically, published seismic wave velocity, liquid limit, plastic limit, water content, and dry density from field and laboratory measurements are used to develop ANN models. Due to the small number of data, models are developed with and without the validation step in order to use more data for training. The results indicate that the performance of the models is improved by using more data for training. For example, predicting seismic wave velocity using more data for training improves the R2 value from 0.50 to 0.78 and reduces the ASE from 0.0174 to 0.0075, and MARE from 30.75 to 18.53. The benefit of adding velocity as an input parameter for predicting water content and dry density is assessed by comparing models with and without velocity. Models incorporating the velocity information show better predictability in most cases. For example, predicting water content using field data including the velocity improves the R2 from 0.75 to 0.85 and reduces the ASE from 0.0087 to 0.0051, and MARE from 10.68 to 7.78. A comparison indicates that ANN models outperformed multilinear regression models. For example, predicting seismic wave velocity using field plus lab data has an ANN derived R2 value that is 81.39% higher than regression model.
1 September 2005 in The Journal of the Acoustical Society of America