Mg alloys/Mg-based composites are utilized significantly in the construction of missiles, aerospace and automobiles due to their lightweight, specific strength, and hardness. In the recent work, Mg-based two-components (Mg–TiO2/Mg–Al2O3) and three-components (Mg–TiO2–Al2O3) composites were fabricated through solid-phase synthesis (powder metallurgy method). Temperature (30 °C), pressure (760 mm Hg) and concentration factors were optimized prior to experiments. The characterization of obtained composites were performed through different physicochemical methods like Surface analyzer, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). FTIR analysis verified the composite fabrication. SEM determined microstructures and particle size of the materials in µm dimensions. XRD confirmed the homogeneity and crystalline nature of the obtained composites. The surface area of the produced samples was observed to vary from 40 to 70 m2/g. These properties allow the prepared composites to play the main role in different adsorption applications and catalytic analysis. The prepared materials were considered to be used as catalyst for the formation of CNTs. The catalytic efficiency was observed to be 80 % for the growth of CNTs.
The ceramic industry is a bit new in Pakistan, and the wastes produced during industrial processes are not properly managed. No effective reusing and recycling schemes have been developed. These wastes are contributing greatly to environmental pollution. In this study, an effort has been made to recycle and use the ceramic wastes as reinforcement fillers in polymeric composites, helping an ecologically and economically possible alternative for the disposal of these wastes. PANI-based ceramic composite samples were prepared and characterized morphologically and electrically. Ceramic wastes were also investigated for purification purposes of municipal wastewater. It was observed that prepared materials are capable for capacitor production. Wastes were found to be 50% efficient in removing methyl orange from water in a specific time. This suggests that the prepared materials can be used in energy harvesting appliances (i.e., capacitors) while the ceramic waste can be applied for purifying polluted water coming out from industrial as well as municipal sewerages.