Memristors have garnered considerable attention within the scientific community as devices for emerging construction of Very Large Scale Integration (VLSI) systems. Owing to their inherent properties, they appear to be promising candidates for pivotal components in computational architectures, offering alternatives to the conventional von Neumann architectures. This work has focused on exploring potential applications of Self-Directed Channel (SDC) memristors as novel RRAM memory cells. The introductory section of the study is dedicated to evaluating the repeatability of the tested memristors. Subsequently, a detailed account of the binary programming testing process for memristors is provided, along with illustrative characteristics depicting the impact of programming pulses on a memory cell constructed from a memristor. A comprehensive data analysis was then conducted, comparing memristors with varying types of doping. The results revealed that SDC memristors exhibit a high level of switching, certainty between the Low Resistance State (LRS) and High Resistance State (HRS), suggesting their capability to facilitate the storage of multiple bits within a single memory cell.
26 June 2014 in International Journal of Applied Mathematics and Computer Science
In this work, the problem of coil design is studied. It is assumed that the structure of the coil is known (i.e., the positions of simple circular coils are fixed) and the problem is to find current distribution to obtain the required magnetic field in a given region. The unconstrained version of the problem (arbitrary currents are allowed) can be formulated as a Least-SQuares (LSQ) problem. However, the results obtained by solving the LSQ problem are usually useless from the application point of view. Moreover, for higher dimensions the problem is ill-conditioned. To overcome these difficulties, a regularization term is sometimes added to the cost function, in order to make the solution smoother. The regularization technique, however, produces suboptimal solutions. In this work, we propose to solve the problem under study using the constrained Quadratic Programming (QP) method. The methods are compared in terms of the quality of the magnetic field obtained, and the power of the designed coil. Several 1D and 2D examples are considered. It is shown that for the same value of the maximum current the QP method provides solutions with a higher quality magnetic field than the regularization method.
This study systematically addresses the challenge of accurately modeling memristors, focusing on four distinct types doped with tungsten, tin, chromium, and carbon, fabricated by Knowm Inc. A comprehensive characterization is performed by subjecting the devices to sinusoidal excitations with varying frequencies and amplitudes, followed by data averaging and high-frequency filtering. The resulting measurements are fitted using three prominent memristor models: VTEAM, MMS, and Yakopcic. Additional bespoke modifications are assessed. These models, typically formulated as coupled algebraic differential equations integrating electrical quantities (voltage and current) with internal state variables governing device dynamics, are optimized using two robust approaches: (1) interior-point optimization with gradient-based search, and (2) Nelder–Mead gradient-free optimization, both with box constraints applied. A thorough comparison and discussion of the optimized model parameters ensue, accompanied by an examination of the sensitivity to diverse frequency and amplitude ranges. The findings inform conclusions and provide a foundation for future refinements, underscoring the importance of multi-model evaluation and advanced optimization strategies in precise memristor modeling. The presented methodology offers a valuable framework for elucidating optimal modeling paradigms tailored to specific memristor architectures and operating regimes, ultimately enhancing their integration in emerging neuromorphic and computational applications.
In this paper, the problem of modeling memristors is studied. Two types of memristors with carbon and tungsten doping fabricated by the Knowm Inc. are tested. The memristors have been examined with either sinusoidal or triangle voltage wave periodic excitation. Some different frequencies, amplitudes and signal shapes have been applied. The collected data have been averaged and subjected to high frequency filtering. The quality of measurement data has also been discussed. The averaged measurement has been modeled using three popular memristor models: Strukov, Biolek and VTEAM. Some additional feathers to the considered models have been proposed and tested. Memristor is usually modeled by a set of algebraic-differential equations which link both electrical values (i.e., voltage and current) and the internal variable(s) responsible for the element dynamics. The interior-point with box constrains optimization method has been used to obtain the optimal parameters of the memristor model that fit best to the collected data. The results of the optimization process have been discussed and compared. The sensitivity to the different frequency range has been also examined and reviewed. Some conclusions and future work ideas have been postulated.
This study systematically addresses the challenge of accurately modeling memristors, focusing on four distinct types doped with tungsten, tin, chromium, and carbon, fabricated by Known Inc. A comprehensive characterization was performed by subjecting the devices to sinusoidal excitations with varying frequencies and amplitudes, followed by data averaging and high-frequency filtering. The resulting measurements were fitted using three prominent memristor models: VTEAM, MMS, and Yakopcic, with additional bespoke modifications assessed. These models, typically formulated as coupled algebraic-differential equations integrating electrical quantities (voltage and current) with internal state variables governing device dynamics, were optimized using two robust approaches: (1) interior-point optimization with gradient-based search, and (2) Nelder-Mead gradient-free optimization, both with box constraints applied. A thorough comparison and discussion of the optimized model parameters ensued, accompanied by an examination of sensitivity to diverse frequency and amplitude ranges. The findings inform conclusions and provide a foundation for future refinements, underscoring the importance of multi-model evaluation and advanced optimization strategies in precise memristor modeling. The presented methodology offers a valuable framework for elucidating optimal modeling paradigms tailored to specific memristor architectures and operating regimes, ultimately enhancing their integration in emerging neuromorphic and computational applications.