This review investigates antifouling agents used in the process of membrane separation (MS), in reverse osmosis (RO), ultrafiltration (UF), nanofiltration (NF), microfiltration (MF), membrane distillation (MD), and membrane bioreactors (MBR), and clarifies the fouling mechanism. Membrane fouling is an incomplete substance formed on the membrane surface, which will quickly reduce the permeation flux and damage the membrane. Foulant is colloidal matter: organic matter (humic acid, protein, carbohydrate, nano/microplastics), inorganic matter (clay such as potassium montmorillonite, silica salt, metal oxide, etc.), and biological matter (viruses, bacteria and microorganisms adhering to the surface of the membrane in the case of nutrients) The stability and performance of the tested nanometric membranes, as well as the mitigation of pollution assisted by electricity and the cleaning and repair of membranes, are reported. Physical, chemical, physico-chemical, and biological methods for cleaning membranes. Biologically induced biofilm dispersion effectively controls fouling. Dynamic changes in membrane foulants during long-term operation are critical to the development and implementation of fouling control methods. Membrane fouling control strategies show that improving membrane performance is not only the end goal, but new ideas and new technologies for membrane cleaning and repair need to be explored and developed in order to develop future applications.

Water shortage is a major worldwide issue. Filtration using genuine polymeric membranes demonstrates excellent pollutant separation capabilities; however, polymeric membranes have restricted uses. Nanocomposite membranes, which are produced by integrating nanofillers into polymeric membrane matrices, may increase filtration. Carbon-based nanoparticles and metal/metal oxide nanoparticles have received the greatest attention. We evaluate the antifouling and permeability performance of nanocomposite membranes and their physical and chemical characteristics and compare nanocomposite membranes to bare membranes. Because of the antibacterial characteristics of nanoparticles and the decreased roughness of the membrane, nanocomposite membranes often have greater antifouling properties. They also have better permeability because of the increased porosity and narrower pore size distribution caused by nanofillers. The concentration of nanofillers affects membrane performance, and the appropriate concentration is determined by both the nanoparticles’ characteristics and the membrane’s composition. Higher nanofiller concentrations than the recommended value result in deficient performance owing to nanoparticle aggregation. Despite substantial studies into nanocomposite membrane manufacturing, most past efforts have been restricted to the laboratory scale, and the long-term membrane durability after nanofiller leakage has not been thoroughly examined.

Due to the impacts of water scarcity, the world is looking at all possible solutions for decreasing the over-exploitation of finite freshwater resources. Wastewater is one of the most reliable and accessible water supplies. As the population expands, so do industrial, agricultural, and household operations in order to meet man’s enormous demands. These operations generate huge amounts of wastewater, which may be recovered and used for a variety of reasons. Conventional wastewater treatment techniques have had some success in treating effluents for discharge throughout the years. However, advances in wastewater treatment techniques are required to make treated wastewater suitable for industrial, agricultural, and household use. Diverse techniques for removing heavy metal ions from various water and wastewater sources have been described. These treatments can be categorized as adsorption, membrane, chemical, or electric. Membrane technology has been developed as a popular alternative for recovering and reusing water from various water and wastewater sources. This study integrates useful membrane technology techniques for water and wastewater treatment containing heavy metals, with the objective of establishing a low-cost, high-efficiency method as well as ideal production conditions: low-cost, high-efficiency selective membranes, and maximum flexibility and selectivity. Future studies should concentrate on eco-friendly, cost-effective, and long-term materials and procedures.

The depletion of fossil fuels has become a significant global issue, prompting scientists to explore and refine methods for harnessing alternative energy sources. This study provides a comprehensive review of advancements and emerging technologies in the desalination industry, focusing on technological improvements and economic considerations. The analysis highlights the potential synergies of integrating multiple renewable energy systems to enhance desalination efficiency and minimise environmental consequences. The main areas of focus include aligning developing technologies like membrane distillation, pervaporation and forward osmosis with renewable energy and implementing hybrid renewable energy systems to improve the scalability and economic viability of desalination enterprises. The study also analyses obstacles related to desalination driven by renewable energy, including energy storage, fluctuations in energy supply, and deployment costs. By resolving these obstacles and investigating novel methodologies, the study enhances the understanding of how renewable energy can be used to construct more efficient, sustainable, and economical desalination systems. Thermal desalination technologies require more energy than membrane-based systems due to the significant energy requirements associated with water vaporisation. The photovoltaic-powered reverse osmosis (RO) system had the most economically favourable production cost, while MED powered via a concentrated solar power (CSP) system had the highest production cost. The study aims to guide future research and development efforts, ultimately promoting the worldwide use of renewable energy-powered desalination systems.

An innovative polymeric membrane has been invented, which presents a breakthrough in the field of desalination membranes. It can desalinate simulated seawater of exceptionally high concentration to produce a high flux of potable water with over 99.7% salt rejection (%SR) in a once-through purge-air pervaporation (PV) process. A set-up was constructed for conducting the desalination experiments and the effect of initial salt solution concentration (Ci) and pervaporation temperature (Tpv) on the water flux (J), %SR, separation factor, and pervaporation separation index were determined. The membrane was prepared by the phase-inversion technique, of a specially formulated casting solution consisting of five ingredients, after which the membrane was subjected to a post-treatment by which certain properties were conferred. The results confirmed that the salinity of the pervaporate was independent of Ci (all %SR above 99.7). The best result was at Tpv = 70 °C, where J varied from 5.97 to 3.45 l/m2 h for Ci = 40–140 g NaCl/l, respectively. The membrane morphology was confirmed to be asymmetric. The contact angle was immeasurable, indicating the membrane to be super-hydrophilic. Activation energies computed using Arrhenius law were, under all conditions investigated, less than 20 kJ/mol K.

The scarcity of drinkable water supplies is becoming a serious and troubling challenge to long-term development. This issue emphasises the urgency of implementing rapid water desalination options. However, desalination is a capital-intensive process that requires a significant amount of energy, and since it is now mostly powered by fossil fuels across the globe, it has the potential to leave a significant carbon footprint. In this light, transitioning to green energy sources for desalination is a necessity in today’s society. Humidification–dehumidification (HD) is one of the most effective desalination procedures to consider for distant places with modest fresh water demands for household and agricultural demands. This is mostly because it requires minimal operational and maintenance concerns. The current article examines the many kinds of HD desalination systems driven by solar energy sources and their key components. The current study established that the seawater HD system is viable for producing fresh water, especially for greenhouses and dispersed demand. HD is an effective technique for eluting fresh water from concentrated brines, boosting production, and minimising harmful environmental impact, benefitting ecosystems and human services. The packed bed humidifier is the most commonly used kind of humidifier in the HD water desalination system. Additionally, as compared to an indirect dehumidifier, the direct dehumidifier improves the performance of the HD desalination system. According to the findings of this research, hybrid energy systems have the greatest gain output ratio (GOR). Solar water heating significantly increases system productivity as compared to solar air heating. When combined with a heat pump, the HD delivers optimal system productivity and GOR at the lowest cost per litre. The conclusion is that, even though humidification–dehumidification is a promising method for decentralised small-scale fresh water production applications, it needs additional improvement to optimise system performance in terms of economy and gain output ratio.