On 17 October 2015, a large-scale subaerial landslide occurred in Taan Fiord, Alaska, which released about 50 Mm${}^3$ of rock. This entered the water body and triggered a tsunami with a runup of up to 193 m. This paper aims to simulate the possible formation of a weak layer in this mountainous slope until collapse, and to analyze the possible triggering factors of this landslide event from a geotechnical engineering perspective so that a deeper understanding of this large landslide event can be gained. We analyzed different remote-sensing datasets to characterize the evolution of the coastal landslide process. Based on the acquired remote-sensing data, Digital Elevation Models were derived, on which we employed a 2D limit equilibrium method in this study to calculate the safety factor and compare the location of the associated sliding surface with the most probable actual location at which this landslide occurred. The calculation results reflect the development process of this slope collapse. In this case study, past earthquakes, rainfall before this landslide event, and glacial melting at the toe may have influenced the stability of this slope. The glacial retreat is likely to be the most significant direct triggering factor for this slope failure. This research work illustrates the applicability of multi-temporal remote sensing data of slope morphology to constrain preliminary slope stability analyses, aiming to investigate large-scale landslide processes. This interdisciplinary approach confirms the effectiveness of the combination of aerial data acquisition and traditional slope stability analyses. This case study also demonstrates the significance of a climate change for landslide hazard assessment, and that the interaction of natural hazards in terms of multi-hazards cannot be ignored.

The Ludoialm landslide, which is located in the municipality of Münster in Tyrol, Austria, represents a large-scale translational landslide in glacial soil sediments characterised by an exceptionally low inclined basal shear zone of only 12${}^{°}$. Although a temporal coincidence between meteorological events and slope displacement is obvious, the hydromechanical coupled processes responsible for the initial landslide formation and the ongoing movement characteristics have not yet been identified. This article provides a comprehensive analysis of the predisposition factors and the initial failure mechanism of this landslide from geological and geotechnical perspectives. We use a prefailure geometry of the cross section to simulate the initial slope failure process by a limit equilibrium analysis (LEA), a strength-reduction finite element method (SRFEM), and a finite element limit analysis (FELA). The shape and location of the computationally obtained basal sliding zone compare well with the geologically assumed one. Based on the computational study, it turns out that a high groundwater table probably caused by snow melting in combination with different permeabilities for the different layers is needed for the formation of the exceptionally low inclined basal shear zone. This paper presents the failure mechanism of the Ludoialm landslide and discusses the role of the shear band propagation in the process of slope destabilization.