The impact of the pantograph of a rail vehicle on the overhead contact line depends on many factors. Among other things, the type of pantograph, i.e., the material of the sliding strip, influences the wear and possible damage to the sliding strip. The possibility of predicting pantograph failures may make it possible to reduce the number of these kinds of failures. This article presents a method for predicting the technical state of the pantograph by using artificial neural networks. The presented method enables the prediction of the wear and damage of the pantograph, with particular emphasis on carbon sliding strips. The paper compares 12 predictive models based on regression algorithms, where different training algorithms and activation functions were used. Two different types of training data were also used. Such a distinction made it possible to determine the optimal structure of the input and output data teaching the neural network, as well as the determination of the best structure and parameters of the model enabling the prediction of the technical condition of the current collector.
Damage to the pantograph or sliding strip may cause the blocking of the railway line. This is the main reason for which the prediction of pantographs’ failure is important for railway carriers and researchers. This article presents a sliding strips failure prediction method as a main means of preventing disruptions to the transport chain. To develop the best predictive model based on the decision tree, the complex tree, medium tree and simple tree machine learning methods were tested. Using a decision tree, the categorization of the given technical conditions can be properly realized. The obtained results showed that the presented model can reduce sliding strip failure by up to 50%. Special attention was paid to the current collector (AKP-4E, 5ZL type), measured during periodic reviews of locomotives EU07 and EU09. To assess the reliability of the selected pantograph strips, a non-destructive degradation analysis was carried out. On the basis of the wear measurements of the strips and the critical value of wear, a failure distribution model was developed. Operational data, collected during periodic technical reviews, were provided by one of the biggest railway carriers in Poland. The results of the performed analyses may be used to build a preventive maintenance strategy to protect pantographs. The applied reliability models of wear propagation can be extended by the parameters of the cost and repair time becoming the basis for estimating the costs of operation and maintenance.
In the field of transport, and more precisely in supply chains, if any of the vehicle components are damaged, it may cause delays in the delivery of goods. Eliminating undesirable damage to the means of transport through the possibility of predicting technical conditions and a state of failure may increase the reliability of the entire supply chain. From the aspect of sustainability, the issue of reducing the number of failures also makes it possible to reduce supply chain disturbances, to reduce costs associated with delays, and to reduce the materials needed for the repair of the means of transport, since, in this case, the costs only relate to the replaced elements before their damage. Thus, it is impossible for more serious damage to occur. Often, failure of one item causes damage to others, which generates unnecessary costs and increases the amount of waste due to the number of damaged items. This article provides an author’s method of technical condition prediction; by applying the method, it would be possible to develop recommended maintenance activities for key elements related to the safety and reliability of transport. The combination of at least two artificial intelligence methods allows us to achieve very good prediction results thanks to the possibility of individual adjustments of weights between the methods used. Such predictive maintenance methods can be successfully used to ensure sustainable development in supply chains.
Strokes are currently the third most common cause of death worldwide and the leading cause of disability in people over 50 years of age. The functioning of post-stroke patients depends primarily on well-conducted rehabilitation, both in stationary conditions and at home. The aim of this study was to evaluate the functional outcomes of patients after ischemic stroke who underwent home rehabilitation. The RMA (Rivermead Motor Assessment) and ADL (activities of daily living) scales were used for evaluation. A total of 20 patients underwent a 4-week home rehabilitation program in Cracow. In the studied group, most patients showed functional improvement after the 4-week rehabilitation period. Predictive models were created (Net1, Net2, Net3) using artificial intelligence algorithms, including regression and classification methods. The analysis results indicate that the best outcomes in predicting the RMA and ADL indicators. For Net2, the prediction accuracy for the ADL indicator was 94.4%, which is significantly higher compared to the other indicators. The RMA1-3 indicators achieved relatively low accuracy rates of 38.9–44.4%. In contrast, for Net3, the RMA1-3 indicators showed high accuracy, achieving 89.1–91.3% correct results. The conclusions of the study suggest that using a combination of the Net2 and Net3 models can contribute to optimizing the rehabilitation process, allowing therapy to be tailored to the individual needs of patients. The research proves that it is possible to predict the effect of rehabilitation by using AI. The implementation of such solutions can increase the effectiveness of post-stroke rehabilitation, particularly through the personalization of therapy and dynamic monitoring of patient progress.
Mainstream materials of the railway pantograph strips are carbon composites. They are subject to wear during use, as well as various types of damage. It is important that their operation time is as long as possible and that they are not damaged, as it may damage the remaining elements of the pantograph and the overhead contact line. As part of the article, three types of pantographs were tested: AKP−4E, 5ZL, and 150 DSA. They had carbon sliding strips made of MY7A2 material. By testing the same material on different types of current collectors, it was possible to check what impact the wear and damage of the sliding strips has on (among others) the method of their installation, i.e., whether the damage to the strips depends on the type of current collector and what is the participation of damage caused by material defects. As a result of the research, it was found that the type of pantograph on which it is used has an undoubted influence on the damage characteristics of the carbon sliding strips, whereas the damage caused by material defects can be classified as a more general group—the group of damage of a sliding strip, which also includes overburning of a carbon sliding strip.