Greenhouse gas emissions (GHGs) and their effects have been a matter of global concern over the past decade. As the demand for energy grows in developing economies, there has been a challenge in harnessing and utilising sustainable forms of energy to meet these demands, and despite the effect of global warming and the problems associated with it, the use of fossil fuels is still increasing. This problem has negatively impacted the climate because greenhouse gases evolved from burning fossil fuel increase the concentration of carbon dioxide in the atmosphere and lead to global warming. This study investigates a method of channelling biogas for use as a sustainable energy source by using membrane technology. Initially, by observing the behaviour of biogas components as they travel selectively through the membrane support, the findings showed that both fluid and structural properties have significant impacts on the separation process. The next approach is to modify the membrane to obtain these optimal conditions. Furthermore, by introducing an agent that serves as an adsorptive medium for maximising contact between the pore walls and the gas molecules, this creates an adsorptive layer that preferentially draws the target gas to its surface to deliver both high permeability and selectivity of the membrane.
In order to meet the demands of growing economies while considering environmental implications, the use of clean and renewable sources of energy has increasingly become of interest. Biogas utilisation is a means by which these rising needs can be met. This involves the use of waste materials; which are deposited on a daily basis by agriculture, sewage, household, to produce energy that may be used for heating, electricity, transportation and other daily needs. This paper would look into the use of nano-structured ceramic membranes for the upgrading of biogas to a high value fuel that can be used for a variety of purposes. The use of membranes offers great advantages including low running costs, high efficiency and the elimination of the need for phase change of the gas. Experiments were carried out using membranes of different pore sizes (15nm, 200nm and 6000nm) to ascertain which would be the most suitable for use in terms of permeability and yield of product gas. The 15nm membrane showed the greatest exit flow of methane compared to carbon dioxide and a mechanism approaching an ideal knudsen regime. Taking into account the effect of molecular weight and viscosity, these results show that the smallest membrane pore size of 15nm had a greater impact on the flow mechanism and thus improvement can be made by modification of the membrane to achieve a mechanism of surface diffusion of the particles.
17 January 2022 in International Journal on Engineering, Science and Technology
In addition to the evolution of green and nano energy, sequestration of CO2 is also an evolving method to control the global CO2 footprint and greenhouse effect. Carbon Capture and Sequestration (CCS) is an established technique to capture carbon from anthropogenic sources, such as power and chemical plants, and then inject the same in subsurface rock micropores, to permanently store the CO2. Besides its environmental credentials, CCS also offers economic opportunities in Gas Enhanced Oil Recovery and Methane displacement in coalbed reservoirs. CCS process incorporates various geological, geometrical and engineering understandings of porous media and fluid dynamics. Previous investigators have identified low permeability rock as a better site for CCS. However, little is known of the propagation and effectiveness of CCS in reservoirs that have multiple layers of sedimentation, vis-à-vis well topology and density, flow direction, storage site, and power optimisation. In reality, these layers altogether form a structural rhythm and gradient. In this study, we investigated the structural rhythms and gradients that optimise CCS by using two objective functions (Darcy and interstitial flowrates) and 15 structural criteria (such as pore size, porosity, tortuosity, and aspect ratio). An experimental method has been applied. Five analogous reservoir porous core samples with varying structural parameters have been tested. The results indicate that CCS optimisation is responsive to structural parameters. The rhythm analysis from this study suggests that the CCS gas flow requires a compound rhythm that has a positive porosity and negative pore gradients. That is, the CCS injection wells should be placed in the reservoir area with relatively low porosity (3%) and large pore size (6000nm), while the storage site should be at a relatively high porosity (20%) and smaller pore size (200nm). This study can be directly applied to CCS practice, such that, given a layered reservoir, engineers can predict the well placement or topology that would optimize some of the essential performance objectives of CCS.
17 January 2022 in International Journal on Engineering, Science and Technology
In more conventional gas reservoirs, gas flow is simple, uncomplicated, and described by simple flux pressure drop expressions. In shale reservoirs however, this relationship takes the form of a more complex and multiscale flow process involving special flow mechanisms. Shale gas reservoirs often contain a significant number of nanopores leading to an apparent permeability that depends on pore fluid type, pore structure and pressure differentials. The complex geometry of shale reservoirs has drastically stimulated basic research on the transport mechanisms involved in the extraction of gas from shale formations. This study is aimed at studying the gas flow in nano pores. In this paper, permeation experiments for methane flow through nanoporous membranes were conducted and the effect of the pore size and pressure on the behaviour of the gas was analysed. The results obeyed the criteria to divide the flow stage into Darcy and Non-Darcy flow. As the pressure increases, the reservoir permeability also increases, and the gas tends to move faster thereby increasing the rate at which it flows per unit area in the system regardless of the temperature difference which means pressure gradient establishes the direction and rate of flow of gas in a reservoir.
17 January 2022 in International Journal on Engineering, Science and Technology
Different membranes covering the macroporous to nano-pororous range and having different porosities have been used to study the mass transfer of methane and carbon dioxide single gases. The effect of flow parameters on the transport mechanisms through porous membranes were reviewed in detail. The characteristics of gas transport through the macroporous, microporous, and nano-porous membranes were investigated with several gas diffusion models in the range of 20–100 ◦C and at pressure differences ranging from 0.2 to 3 bar. The experimental gas permeation data of the membranes were analyzed using the Darcy flow model. The results clearly showed good agreement between the model analysis and the experimental data. The experimental data showed that the permeation followed a parallel flow model in which the behavior of gases was governed by viscous and Knudsen diffusion, although to varied degrees. Permeation of the gases through each membrane varies considering the viscosity of the gases at the same temperature. Furthermore, the membranes followed the configurational diffusion model in which the permeance increased with increasing pressure and decreasing temperature. For the gas flow measurements through macroporous and nano-porous membranes with diameters ranging from 6000nm to 15nm, the results indicate that the experimental flux agrees well with the calculated (model) flux through which gas flows from the bulk stream in the shell side to the membrane outer surface where viscous flow and Knudsen diffusion coexist. The study shows that experimental flux is larger than Knudsen diffusion, and the contribution of Knudsen diffusion to the experimental flux increases with the decrease in the diameter. On the other hand, the effects of gas slippage are considerable as gas velocity near the wall is higher than zero. The slip length effects are inversely proportional to pore size and with driving pressure.