Photonic computation has garnered huge attention due to its great potential to accelerate artificial neural network tasks at much higher clock rate to digital electronic alternatives. Especially, reconfigurable photonic processor consisting of Mach–Zehnder interferometer (MZI) mesh is promising for photonic matrix multiplier. It is desired to implement high‐radix MZI mesh to boost the computation capability. Conventionally, three cascaded MZI meshes (two universal N × N unitary MZI mesh and one diagonal MZI mesh) are needed to express N × N weight matrix with O ( N2 ) MZIs requirements, which limits scalability seriously. Here, we propose a photonic matrix architecture using the real‐part of one nonuniversal N × N unitary MZI mesh to represent the real‐value matrix. In the applications like photonic neural network, it probable reduces the required MZIs to O ( N log 2N ) level while pay low cost on learning capability loss. Experimentally, we implement a 4 × 4 photonic neural chip and benchmark its performance in convolutional neural network for handwriting recognition task. Low learning‐capability‐loss is observed in our 4 × 4 chip compared to its counterpart based on conventional architecture using O ( N2 ) MZIs. While regarding the optical loss, chip size, power consumption, encoding error, our architecture exhibits all‐round superiority.
Along the twentieth century, the electronic properties of bismuth have been widely studied, especially in relation with its magnetoresistive and thermoelectric responses. In this context, a particular emphasis has been made on electronic confinement effects in bismuth nanostructures (or nanobismuth). In the recent years, the optical properties of bismuth nanostructures are focusing a growing interest. An increasing number of reports point at the potential of such nanostructures to support plentiful optical resonances over an ultrabroad spectral range: “interband plasmonic” resonances in the ultraviolet, visible, and near-infrared; dielectric Mie resonances in mid- and far-infrared; and conventional free-carrier plasmonic resonances in the far-infrared and terahertz. With the aim to provide a comprehensive basis for exploiting the full optical potential of bismuth nanostructures, we review the current progress in their controlled fabrication, the trends reported (from theoretical calculations and experimental observations) for their optical and plasmonic response, and their emerging applications, including photocatalysis and switchable metamaterials.
For the usage of the memristors in functional circuits, a predictive physical model is of great importance. However, other than the developments of the memristive models accounting bulky effects, the achievements on simulating the interfacial memristance are still insufficient. Here we provide a physical model to describe the electrical switching of the memristive interface. It considers the trap-assisted transition between Schottky emission and Fowler-Nordheim tunneling, and successfully reproduces the memristive behaviors occurring on the interface between Bi2S3 nano-networks and F-doped SnO2. Such success not only allows us uncover several features of the memristive interface including the distribution nature of the traps, barrier height/thickness and so on, but also provides a foundation from which we can quantitatively simulate the real interfacial memristor.
Bi2S3is a semiconductor with rational band gap around near-IR and visible range, and its nanostructures (or nano-Bi2S3) have attracted great attention due to its promising performances in optoelectronic materials and devices. An increasing number of reports point to the potential of such nanostructures to support a number of optical applications, such as photodetectors, solar cells and photocatalysts. With the aim of providing a comprehensive basis for exploiting the full potential of Bi2S3 nanostructures on optoelectronics, we review the current progress in their controlled fabrication, the trends reported (from theoretical calculations and experimental observations) in their electrical properties and optical response, and their emerging applications.
23 August 2022 in IEEE Journal of Selected Topics in Quantum Electronics
We propose an inferencing framework of a hybrid-integrated photonic spiking neural network (PSNN) to perform pattern recognition tasks, where the linear computation is realized based on a 4 × 4 silicon photonic Mach-Zehnder interferometer (MZI) array, and the nonlinear computation is performed by an InP-based spiking neuron array based on vertical-cavity surface-emitting lasers with an embedded saturable absorber (VCSELs-SA). With the modified Tempotron-like remote supervised method (ReSuMe) training algorithm, we realize two pattern recognition tasks, the recognition of numbers “0-3” and optical character recognition (OCR). The phase shifts in the MZI array are accurately configured to represent the weight matrix according to the decomposition procedure of a 4 × 4 triangular MZI mesh. Besides, the effects of the phase shift error and quantization precision of phase shifters (PSs) on the recognition performance are analyzed. For the OCR task, the 400 × 10 PSNN is realized by multiplexing the 4 × 4 MZI array based on the matrix blocking and the reconfigurability of the MZI array. This work provides a systematic computational model of the hybrid-integrated PSNN based on the silicon photonics and InP platforms, enabling the co-design and optimization of hardware architecture and algorithm, which contributes one step forward toward the construction of a hybrid-integrated PSNN hardware system.
Hybrid nanostructures composed of plasmonic metal and semiconductor are receiving increasing attentions, owing to their unique optical features that are induced by the co-existence of localized surface plasmon resonance (SPR) and semiconduction as well as the synergistic interactions between these two components. Other than the structures based on conventional noble metals, a cost-effective structure based on non-noble metal is studied in this work. Utilizing the surface dewetting in Bi-Si system, the Bi-nanorod/Si-nanodots hybrid structure (BSHS) is prepared by alternated sputtering of Bi and Si at low rate. The shift, split, and high order excitation of SPRs in BSHS are studied combining numerical and theoretical simulation. Calculations of the optical extinction performed as a function of the size of BSHS show a guideline to tune its spectra.