Selective laser melting has a great potential to manufacture biocompatible metal alloy scaffolds or implants with a regulated porosity structure. This study uses five face-centered cubic (FCC) lattice structures, including FCC, FCC-Z, S-FCC, S-FCC-Z, and FCC-XYZ. Specimens with different lattice structures are fabricated using two laser energy densities, 71 J/mm3 and 125 J/mm3. Density, tensile, compressive and flexural test results exhibit the effect of laser parameters and lattice structure geometries on mechanical properties. The higher laser energy density of 125 J/mm3 results in higher properties such as density, strength, and Young’s modulus than the laser energy density of 71 J/mm3. The S-FCC lattice has the lowest density among all lattices. The mechanical tests result show specimen with FCC-XYZ lattice structures fabricated using a laser energy density of 125 J/mm3 meet the tensile properties requirement for human ribs. This structure also meets the requirement in flexural strength performance, but its stiffness is over that of human ribs. The compression test results of lattices are still incomparable due to unavailable compression data of the human ribs. In short, The FCC-XYZ lattice design fabricated by the 125 J/mm3 laser energy density parameter can be used to manufacture customized rib implants.
24 December 2024 in International Journal of Precision Engineering and Manufacturing
Unsaturated polyester (UP) resin containing aromatic ring was blended with vinyl ester (VE) at wide range composition (10, 20, 30, 40,and 80 wt.%) using mechanical blending method. The blends were cured at room temperature using methyl ethyl ketone peroxide (MEKP) (4 wt.%) as catalyst initiator without the presence of catalystaccelerator. The effect of vinyl ester composition on theenhancement of mechanical and thermal properties of unsaturated polyester/vinyl ester blends was investigated.The polymer blends were characterized by Fourier Transform Infra Red (FTIR)spectroscopy, tensile testing, hardness testing, scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). IR spectra showed UP and VE peaks. The curing copolymerization reactionoccurred at vinyl (C=C) bonds. The addition of vinyl esters enhanced mechanical and thermal properties. The UP/VE blends showed homogeneous morphology, transparent and copolymer thermoset blend.
Selective laser melting technology is one of the metal additive manufacturing technologies that can convert metal powder to complex parts without the assembly process. This study aims to optimize the volumetric laser energy density for printing 3D metal objects with hinges geometry. The material is stainless steel 316L powder. The volumetric laser energy densities ranging from 4.1 J/mm3 to 119.1 J/mm3 are applied to fabricate 3D free-assembled hinges with various clearances of 0.38 mm, 0.39 mm, 0.40 mm, and 0.41 mm and investigate the relationship between volumetric laser energy density and clearance. A multibody model, consisting of nine segments with eight hinges, is proposed to be printed with the optimized volumetric laser energy density. The optical microscope and the hardness test are performed to observe the porosity and hardness property of the SLMed object. The result shows that laser energy densities between 105.5 J/mm3 and 119.1 J/mm3 can produce the high densification of SLMed objects with a porosity defect of 0.24% to 0.20% and hardness in the range of 207 HV to 215 HV. The optimization of laser energy densities is in the range of 105.5 J/mm3 to 119.1 J/mm3, which can be used to fabricate the movable hinges with a minimum clearance size of 0.41 mm. The proposed dinosaur object is printed successfully and all joints are rotatable.
1 June 2025 in 3D Printing and Additive Manufacturing
This study investigates the manufacturability of laser powder bed fusion (LPBF) for fabricating SS316L powder into components with rectangular micropillar arrays on their surface. The rectangular micropillars with different width sizes from 200 to 800 μm were fabricated with various LPBF volumetric laser energy densities and building directions. Scanning Electron Microscope, Optical Microscope, and Vickers hardness test were used to observe the effect of micropillar sizes, the volumetric laser energy densities, and build directions on the morphologies, structural densification, geometrical accuracies, and hardness properties of the fabricated micropillars. In this work, the experimental results present that the optimum volumetric laser energy density to fabricate rectangular micropillars with a minor defect was 105 J/mm3. The micropillars fabricated with built direction on 0° and 45° planes had stable morphologies and geometrical accuracies. The fabricated micropillar had larger width and pitch, but smaller gap sizes than their computer aided design designs. The hardness property of fabricated micropillars was affected by the size of micropillars, volumetric laser energy density, and build directions during the LPBF process. In conclusion, the rectangular micropillars with width sizes of 200-800 μm were successfully fabricated on the component's surface created at 0° and 45° planes by LPBF technique using 105 J/mm3 volumetric laser energy density.