Multi-beam satellite communication systems are promising architectures in the future. A packet is transmitted by multi-satellite and multi-beam cooperatively, which can provide efficient spectrum utilization, improve system throughput, and guarantee Quality of Services (QoS). In multi-beam satellite communication systems, multi-layer and multi-dimensional radio resources change dynamically, which leads to the discontinuity of optimal resources and the lack of mapping balance between packets and radio resources. To deal with these problems, we propose a cross-layer and cross-dimension radio resources optimization model based on the weighted discrete firefly algorithm and an adaptive packet segmentation scheme based on the irregular gradient algorithm. The cross-layer and cross-dimension radio resources optimization model based on the weighted discrete firefly algorithm simulates cross-layer and cross-dimension optimization for the high-dynamic and multi-dimensional radio resources by considering the channel state information (CSI) and QoS in the multi-beam satellite communication system. The optimal resources are taken as the weight of irregular gradient algorithm to segment packets and map packets to radio resources, which can realize the mapping balance between packets and radio resources and ensure the efficiency and reliability of communication. The simulations show that the new transmission scheme improves the normalized system throughput and user satisfaction index by 18.7% and 6.2%, respectively.

Low Earth Orbit (LEO) Satellite Internet Network (LEO-SIN) is a promising approach to global Gigabit per second (Gbps) broadband communications in the coming sixth-generation (6G) era. This paper mainly focuses on the innovation of accuracy improvement of simulation modeling of the Doppler Power Spectrum (DPS) of satellite channels in LEO-SIN. Existing DPS modeling methods are based on Rice’s Sum-of-Sinusoids (SOS) which have obvious modeling errors in scenarios with main signal propagation paths, asymmetrical power spectrum, and random multi-path signals with a random Angle of Arrival (AOA) in LEO-SIN. There are few state-of-art researches devoted to higher accuracy of DPS modeling for simulation. Therefore, this paper proposes a novel Random Method of Exact Doppler Spread method Set Partitioning (RMEDS-SP). Distinct from existed researches, we firstly model the DPS of LEO-SIN, which more accurately describes the characteristics of frequency dispersion with the main path and multi-path signals with random AOA. Furthermore, piecewise functions to the Autocorrelation Function (ACF) of RMEDS-SP is first exploited to converge the modeling error supposition with time by periodic changes, which further improve the accuracy of the DPS model. Experimental results show that the accuracy of DPS in our proposed model is improved by 32.19% and 18.52%, respectively when compared with existing models.

In this paper, a silicon-based radio frequency micro-electromechanical systems (RF MEMS) pattern reconfigurable antenna for a Ka-band application was designed, analyzed, fabricated, and measured. The proposed antenna can steer the beam among three radiating patterns (with main lobe directions of −20°, 0°, and +20° approximately) at 35 GHz by switching RF MEMS operating modes. The antenna has a low profile with a small size of 3.7 mm × 4.4 mm × 0.4 mm, and consists of one driven patch, four parasitic patches, two assistant patches, and two RF MEMS switches. The active element pattern method integrated with signal flow diagram was employed to analyze the performances of the proposed antenna. Comparing the measured results with analytical and simulated ones, good agreements are obtained.

In indoor environments where Global Navigation Satellite System (GNSS) signals are entirely blocked, wireless signals such as 5G and Ultra-Wideband (UWB) have become primary means for high-precision positioning. However, complex indoor structures lead to significant multipath effects, which severely constrain the improvement of positioning accuracy. Existing indoor positioning methods rarely link environmental semantic information (e.g., wall, column) to multipath error estimation, leading to inaccurate multipath correction—especially in complex scenes with multiple reflective objects. To address this issue, this paper proposes a LiDAR-assisted multipath estimation and positioning method. This method constructs a tightly coupled perception-positioning framework: first, a semantic-feature-based neural network for reflective surface detection is designed to accurately extract the geometric parameters of potential reflectors from LiDAR point clouds; subsequently, a unified factor graph model is established to multidimensionally associate and jointly infer terminal states, virtual anchor (VA) states, wireless signal measurements, and LiDAR-perceived reflector information, enabling dynamic discrimination and utilization of both line-of-sight (LOS) and non-line-of-sight (NLOS) paths. Experimental results demonstrate that the root mean square error (RMSE) of the proposed method is improved by 32.1% compared to traditional multipath compensation approaches. This research provides an effective solution for high-precision and robust positioning in complex indoor environments.