Cemented paste backfill (CPB) offers an environmentally sustainable way to utilize mine tailings, one of the largest waste streams in the world. CPB is a support and filler material used in underground mine cavities, which consists of mine tailings, water, and binder material that usually is cement. Replacing cement with secondary raw materials like granulated blast-furnace slag reduces the total CO2 emissions and strengthens the internal microstructure of the CPB. This study characterizes the total- and soluble contents of CPB starting materials and five CPB specimens containing different levels of slag substitution. In addition, phase composition (mineral liberation analysis, MLA) and internal structure (X-ray tomography) of five CPB specimens is documented, and measurements of compressive strength are used to evaluate their suitability as backfill material. Mine tailings and CPB specimens used in this study are rich in sulphates and arsenic, but low in sulphides. Stronger As leaching of ground CPB specimens compared with ground mine tailings is related to the elevating pore water pH during the cement hydration. The hydration product ettringite is found in all CPB specimens and its content is the lowest in the slag containing specimens. X-ray tomography revealed vertically differentiated density structures in the CPB specimens. The lower parts of all specimens are denser in comparison with the upper parts, which is probably due to the compaction of the solid particles at the base. The compressive strength test results indicate that partial substitution of cement with slag improves the strength of the CPB. The total replacement of cement with slag reduces the early strength but gives excellent strength and lower porosity over longer time intervals. The results of the study can be utilized in developing more durable and environmentally responsible CPB recipes for gold mines of similar mineral composition and gold extraction method.
1 September 2020 in Journal of the European Ceramic Society
Historical mining towns face financial challenges with the proposed Soil Monitoring Law of the European Union, which will require the management of soil contamination, since remediating soil in densely populated towns and cities is challenging. We compared the environmental impact of sulfide ore mining in the urban area of Outokumpu in Finland with that of other European sites, focusing on soil contamination. Soil sampling revealed that mine tailings were historically used in road construction. The threshold values of Cu, Ni, and Zn were exceeded at several points, with the highest Cu content reaching 2733 mg/kg. Groundwater and surface water contamination was also evident, mainly due to the lack of a proper protective structure in tailings to prevent acid mine drainage. A preliminary risk assessment suggests health risks from unintentional soil ingestion and dust inhalation. However, the issues in many historical mining towns are more severe if they contain high levels of As or Pb which are more toxic than those of concern in Outokumpu. The historical mining town of Freiberg in Saxony, Germany, has been regulated as a 'Soil Planning Area', where limit values have been provided based on land use scenarios. The regional handling and re-use of excavated soil is based on contamination categories, with the tightest restrictions for the areas where the As content exceeds 340 mg/kg. We suggest 'Soil Planning Areas' to be established in historical mining towns facing similar challenges as a first step to mitigate environmental and health risks with reasonable economic resources.