Qingxi Zeng

Dr. Qingxi Zeng


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 March 2023 in IEEE Sensors Journal
Verified
Journal Article
Closed access
QZQingxi Zeng
Qingxi Zeng
YJYu Jin
Yu Jin
HYHaonan Yu
Haonan Yu
XYXia You
Xia You
The successful landing of UAVs on unmanned vehicle landing platforms is critical for resolving the problem of insufficient range of UAVs in practical missions. Existing localization techniques for autonomous UAV landing are primarily vision-based, but this method is limited due to reliance on external lighting conditions. In this paper, we propose a localization system for UAV landing on a mobile platform, which can be conveniently deployed on an unmanned vehicle landing platform. Four UWB anchors were deployed on the 0.8m×1.4m rectangular unmanned vehicle landing platform. The spacing of the two tags installed on the UAV and the ranging information were used as constraints, and the linear least squares method was used to calculate the iterative initial coordinates of the gradient descent method to solve for the positions of the two UWB tags and fuse them with the IMU data to provide accurate coordinate for the safe landing of the UAV. By comparing the experiments with the linear least squares method in five experiments, it is demonstrated that the average RMSE of the localization system proposed in this paper is reduced by 61%.

18 December 2023 in IEEE Sensors Journal
Verified
Journal Article
Closed access
QZQingxi Zeng
Qingxi Zeng
XTXiaodong Tao
Xiaodong Tao
HYHaonan Yu
Haonan Yu
XJXufang Ji
Xufang Ji
TCTingting Chang
Tingting Chang
YHYixuan Hu
Yixuan Hu
Achieving autonomous localization is key to robot navigation technology. In comparison to the outdoors, the indoor environment often has problems such as insufficient features and limited environmental information; meanwhile, in order to realize the practical application of localization methods, how to reduce the system complexity and dependence on hardware and reduce the cost is also needed to be considered. To address these challenges, this paper proposes ALAE-Gmapping, an indoor 2D LiDAR SLAM method based on an artificial landmark assistance estimator (ALAE), which builds upon the classical Gmapping algorithm and the Adaptive Monte Carlo Localization (AMCL) method. The proposed method optimizes the scan matching and proposal distribution construction processes of the Gmapping algorithm by deploying a certain number of landmarks (e.g., reflectors) in the indoor environment while incorporating environmental features. Subsequently, the motion model sampling of the AMCL method is improved and optimized by using artificial landmarks, and the global localization of the robot in the indoor environment is achieved by fusing genetic algorithm (GA) and combining with a priori maps. Experimental results in an indoor environment demonstrate that the proposed method can maintain a good mapping effect even with a reduced number of particles. Furthermore, the improved AMCL method achieves a 9.25% increase in global localization accuracy compared to the AMCL algorithm.

28 October 2021 in Sensors
Verified
Journal Article
Open access
PDF file
QZQingxi Zeng
Qingxi Zeng
YKYuchao Kan
Yuchao Kan
XTXiaodong Tao
Xiaodong Tao
YHYixuan Hu
Yixuan Hu
As one of the automated guided vehicle (AGV) positioning methods, the LiDAR positioning method, based on artificial landmarks, has been widely used in warehousing logistics industries in recent years. However, the traditional LiDAR positioning method based on artificial landmarks mainly depends on the three-point positioning method, the performance of which is limited due to landmarks’ layout and detection requirements. This paper proposes a LiDAR positioning algorithm based on iterative closest point (ICP) and artificial landmarks assistance. It provides improvements based on the traditional ICP algorithm. The result of positioning provided by the landmarks is used as the initial iteration ICP value. The combination of the ICP algorithm and landmarks enables the positioning algorithm to maintain a certain positioning precision when landmark detection is disturbed. By comparing the proposed algorithm with the positioning scheme developed by SICK in Germany, we prove that the combination of the ICP algorithm and landmarks can effectively improve the robustness under the premise of ensuring precision.

29 October 2021 in IEEE Sensors Journal
Verified
Journal Article
Closed access
YZYuhong Zheng
Yuhong Zheng
QZQingxi Zeng
Qingxi Zeng
CLChade Lv
Chade Lv
HYHaonan Yu
Haonan Yu
BOBangjun Ou
Bangjun Ou
As the most promising indoor positioning technology, UWB has been widely used in the field of robot positioning. However, in a complex indoor environment, UWB faces problems such as non-line-of-sight, multipath, signal attenuation and scattering. Aiming at the shortcomings of single UWB positioning, this paper proposes a mobile robot integrated navigation algorithm based on template matching VO/IMU/UWB. First, a template matching VO based on IMU assistance is designed, and then the position information calculated by the VO and the UWB position information are calculated. The difference is used as the input of the Kalman filter for filtering estimation. Finally, the estimated The position error corrects the VO position information to obtain the final positioning result of the combined system. Experiments show that the proposed integrated navigation method can significantly improve the positioning accuracy of UWB.

23 May 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
TCTingting Chang
Tingting Chang
LZLiang Zhao
Liang Zhao
QZQingxi Zeng
Qingxi Zeng
YHYixuan Hu
Yixuan Hu
XTXiaodong Tao
Xiaodong Tao
XJXufang Ji
Xufang Ji
In conventional integrated navigation systems, such as Kalman filter, the statistical information of the process and measurement noise are assumed to be constant. However, in real applications, the process and measurement covariance matrices are unknown and time-varying due to vehicle dynamics, environmental conditions and incomplete knowledge of filter statistical information. In this paper, a variational Bayesian based adaptive error-state Kalman filter (VB-ESKF) is proposed. By leveraging the versatility of the variational Bayesian framework, the filter effectively handles uncertainties and adaptively estimates the measurement noise covariance, resulting in improved accuracy and reliability. A LiDAR-Inertial state estimator based on VB-ESKF for real-time ego-motion estimation is proposed to provide robust and efficient navigation for ground vehicles. The tightly-coupled LiDAR-Inertial navigation algorithm, based on the original ESKF and VB-ESKF, were implemented on the Robot Operating System (ROS) platform. The experimental results demonstrate significant advantages of the VB-ESKF in reducing root mean square error (RMSE), mean absolute error (MAE), and sensitivity to the non-optimal process noise variance.

10 May 2021 in IEEE Sensors Journal
Verified
Journal Article
Closed access
QZQingxi Zeng
Qingxi Zeng
BOBangjun Ou
Bangjun Ou
CLChade Lv
Chade Lv
SSSebastian Scherer
Sebastian Scherer
YKYuchao Kan
Yuchao Kan
Template matching visual odometry, as a kind of visual odometry, is very important to the navigation and positioning of mobile robots. However, the traditional template matching visual odometry mainly relying on the Ackerman steering model has limitations. In this paper, a monocular visual odometry is proposed by using template matching and IMU. Improved on the traditional template matching visual odometry, it uses the yaw angle provided by the IMU to replace the rotation angle calculated with the Ackerman steering model. The introduction of IMU makes the visual odometry applicable to any robot or vehicle model. In this paper, several experiments are carried out on different types of roads. The results show that the odometry model can better restrain the divergence of the visual odometry and effectively improve its positioning accuracy because of the introduction of the IMU yaw angle. For a distance as long as 355 meters, the expected position error is about 2.32%.