Cerâmicas de niobato de magnésio e chumbo (PMN) pertencem à classe de materiais ferroelétricos usados em diversas aplicações tecnológicas. Contudo, existe grande dificuldade em produzir cerâmicas de PMN sem a formação de fases secundarias. Estudos recentes mostraram que a adição de PT e La permitem, respectivamente, estabilizar a fase perovskita e atingir-se a transparência da ordem das cerâmicas comerciais de PLZT. Neste trabalho realizou-se a síntese de pós do sistema (1-x)PLMN-xPT em função de PT (11 < x < 15), para 1% em mol de La. Encontraram-se apenas traços de fase pirocloro (2-3%) nos difratogramas de raios X dos pós, sem uma relação direta com a concentração de PT. Foram alcançadas alta taxa de densificação e microestrutura homogênea com prensagem uniaxial a quente. A transmitância óptica passou por um máximo (até 55% em λ= 632 nm) para x= 0,14. Coeficientes eletro-ópticos quadráticos tão altos quanto 17,5 x10-16m²/V² posicionam estes materiais como de melhor resposta electro-óptica entre os ferroelétricos.
Piezoelectric materials are widely used in electronic devices and, traditionally, various lead-based materials have been implemented in such applications. However, because of the damage caused by lead, other materials with similar characteristics that do not cause a negative impact on human health and the environment have been developed. A material with those characteristics is potassium-sodium niobite K0.5Na0.5 Nbo3. In this study, we investigate the thermogravimetric, structural, and microstructural properties of powders of such system obtained through oxide mixing with the aim of establishing the effect and efficiency of grinding (using a horizontal and a planetary ball mill grinder) on the production of the final material. It was determined that horizontal grinding and calcination at 900°C create the optimal conditions for obtaining K0.5Na0.5 Nbo3 powders, by oxide mixing, with the adequate structure and microstructure to continue the densification and/or doping processes.
The lifetimes at higher temperatures on lanthanum-modified lead titanate (PLT) are mainly due to the anharmonic decay of optical phonons into low-energy phonons. The temperature-independent contributions from inherent crystal defects and from boundary scattering become comparable to the phonon scattering contribution at lower temperatures. The thermal interaction is large at higher temperatures which decreases the phonon mean free path, and so the decay lifetime decreases as the temperature of the system is increased. This leads to the increased line width at higher temperatures. We made an estimate of the lifetimes for different concentrations and temperatures in PLT.
This study investigates the effects of Spark Plasma Sintering (SPS) on the physical, structural, microstructural, dielectric, and optical properties of on 87[Pb(1−y)Laₓ(Mg1/3Nb2/3)O3]-13PbTiO3, (PLMN-13PT) ceramics. The primary objective was to evaluate how SPS influences the densification, grain growth, and compositional variations of these ceramics, which are critical for electronic device applications. The results demonstrate that SPS effectively achieves high relative density while suppressing grain growth, leading to a more homogeneous microstructure. However, the rapid densification process also induces compositional variations that significantly impact the dielectric properties, including the reduction of undesirable phases like pyrochlore, which are detrimental to performance. These findings highlight the potential of SPS for optimizing PLMN-13PT ceramics, enhancing their suitability for the miniaturization of multifunctional electronic devices.