Background: The level of free fatty acids (FFAs) is an important oil quality index that is consistently measured at mills and refineries to ensure that palm oil is within specification limits. FFAs can accumulate at any point throughout the process, for example, during fresh fruit bunch (FFB) harvesting or during the mill process before sterilisation. Another key contributor to FFA build-up is loose fruit (LF), which is collected following FFB harvesting and is commonly processed together with FFB into crude palm oil (CPO) at the mill. The aim of this study was to identify pivotal points of FFA formation during the process of crude palm oil production. Results: The present study shows that the highest FFA accumulation occurred during the conveying process at the mill before sterilisation due to significant fruit damage. The rapid formation of FFA occurred during the first 15 min of oil palm fruit bruising. A minimum temperature of 60 °C for one hour was needed to deactivate the lipase activity, which is responsible for FFA formation. Blending high-FFA CPO with standard CPO affected indices of palm oil quality, such as the deteriorated peroxide value (PV) and anisidine value (AV), and particularly worsened the bleachability index (DOBI). Conclusions: This study suggests that the conveyor system in the mill could be the prime area to focus on in terms of FFA reduction, along with minimising bruising events. In addition, loose fruits (LF) with high FFA content should be processed separately from FFB, and high-FFA CPO derived from LF should not be mixed with standard CPO.
Quality and food safety are of paramount importance to the palm oil industry. In this work, we investigated the practicability of ethylene gas exogenous application on post‐harvested oil palm fruit bunches to improve the crude palm oil (CPO) quality. The bunches were first exposed to ethylene gas for 24 hr to induce abscission of palm fruits from bunches. The detached fruits were then subjected to heat treatment, mechanical extraction, clarification and drying to produce CPO. Critical quality parameters of CPO produced, that is free fatty acid, deterioration of the bleachability index and triacylglycerol showed improvement with ethylene gas treatment. Contaminant content that is phosphorus, chloride, iron, and copper also showed a reduction in the CPO derived from ethylene‐treated bunches. These findings corresponded with low levels of contaminants such as 3‐monochloropropane‐1,2‐diol esters and glycidyl esters in refined oil. The implementation strategy and practicability of this method is herein proposed and discussed. Ethylene application not only improves the CPO quality, but could potentially enhance the process sustainability of palm oil mills.
The processing of oil palm fresh fruit bunches (FFB), together with loose fruits, in the current mill operation contributes to oil loss and high free fatty acids (FFA), affecting crude palm oil quality. Fruit detachment induced by ethephon and ethylene may mitigate the current processing issues. This study shows that a 0.50% (v/v) ethephon application by the evaporation method induced the highest fruit detachment of 30.8 ± 1.1% after 24 h at room temperature, with the FFA content in the extracted crude palm oil at 0.34 ± 0.09%. Ethephon application was effective on bunches between 14 and 28 kg, and fruit detachment was higher in ripe and underripe bunches at 24.1 ± 0.9% and 23.2 ± 0.1%, respectively. A significant fruit detachment of 47.2 ± 2.4% was achieved when the bunches were also stripped mechanically, but the FFA content increased almost 4-fold, from 1.0 ± 0.2% to 3.8 ± 1.2%. The application of ethylene gas at 750 ppm yielded 29.4 ± 1.9% fruit detachment. The findings present the possibility of using ethylene as an indirect method for minimizing oil loss without increasing the FFA content in future crude palm oil production systems.