Ahmed Soliman Hassan

Dr. Ahmed Soliman Hassan

orcid

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2004 in Energy Conversion and Management
Verified
Journal Article
Closed access
ANA.S. Nafey
A.S. Nafey
HFH.E.S. Fath
H.E.S. Fath
SES.O. El-Helaby
S.O. El-Helaby
AHAhmed Soliman Hassan
Ahmed Soliman Hassan

1 May 2004 in Energy Conversion and Management
Verified
Journal Article
Closed access
ANA.S. Nafey
A.S. Nafey
HFH.E.S. Fath
H.E.S. Fath
SES.O. El-Helaby
S.O. El-Helaby
AHAhmed Soliman Hassan
Ahmed Soliman Hassan

1 February 2017 in Journal of Environmental Chemical Engineering
Verified
Journal Article
Closed access
Sayed M. SalehSayed M. Saleh
Sayed M. Saleh
AHAhmed Soliman Hassan
Ahmed Soliman Hassan
MEMohamed A Sharaf Eldean
Mohamed A Sharaf Eldean
VKVishal Kale
Vishal Kale
BGBhushan Gadgil
Bhushan Gadgil


9 December 2023 in Journal of Cleaner Production
Verified
Journal Article
Closed access
MEMohamed Elashmawy
Mohamed Elashmawy
SSSwellam Wafa Sharhsir
Swellam Wafa Sharhsir
GAGamal Bedair Abdelaziz
Gamal Bedair Abdelaziz
FAFuhaid Alshammari
Fuhaid Alshammari
Mohamed Mohamed Zaky AhmedMohamed Mohamed Zaky Ahmed
Mohamed Mohamed Zaky Ahmed
AHAhmed Soliman Hassan
Ahmed Soliman Hassan

14 February 2022 in Materials
Verified
Journal Article
Open access
PDF file
Sabbah AtayaSabbah Ataya
Sabbah Ataya
Mohamed Mohamed Zaky AhmedMohamed Mohamed Zaky Ahmed
Mohamed Mohamed Zaky Ahmed
Mohamed M. El-Sayed Seleman El-NagarMohamed M. El-Sayed Seleman El-Nagar
Mohamed M. El-Sayed Seleman El-Nagar
KHKhalil Hajlaoui
Khalil Hajlaoui
FLFahamsyah H. Latief
Fahamsyah H. Latief
Mohamed. I. A. HabbaMohamed. I. A. Habba
Mohamed. I. A. Habba
In the current study, a 2 mm thick low-carbon steel sheet (A283M—Grade C) was joined with a brass sheet (CuZn40) of 1 mm thickness using friction stir spot welding (FSSW). Different welding parameters including rotational speeds of 1000, 1250, and 1500 rpm, and dwell times of 5, 10, 20, and 30 s were applied to explore the effective range of parameters to have FSSW joints with high load-carrying capacity. The joint quality of the friction stir spot-welded (FSSWed) dissimilar materials was evaluated via visual examination, tensile lap shear test, hardness test, and macro- and microstructural investigation using SEM. Moreover, EDS analysis was applied to examine the mixing at the interfaces of the dissimilar materials. Heat input calculation for the FSSW of steel–brass was found to be linearly proportional with the number of revolutions per spot joint, with maximum heat input obtained of 11 kJ at the number of revolutions of 500. The temperature measurement during FSSW showed agreement with the heat input dependence on the number of revolution. However, at the same revolutions of 500, it was found that the higher rotation speed of 1500 rpm resulted in higher temperature of 583 °C compared to 535 °C at rotation speed of 1000 rpm. This implies the significant effect for the rotation speed in the increase of temperature. The macro investigations of the friction stir spot-welded joints transverse sections showed sound joints at the different investigated parameters with significant joint ligament between the steel and brass. FSSW of steel/brass joints with a number of revolutions ranging between 250 to 500 revolutions per spot at appropriate tool speed range (1000–1500 rpm) produces joints with high load-carrying capacity from 4 kN to 7.5 kN. The hardness showed an increase in the carbon steel (lower sheet) with maximum of 248 HV and an increase of brass hardness at mixed interface between brass and steel with significant reduction in the stir zone hardness. Microstructural investigation of the joint zone showed mechanical mixing between steel and brass with the steel extruded from the lower sheet into the upper brass sheet.